Mixing of particles in rotary drums: A comparison of discrete element simulations with experimental results and penetration models for thermal processes

The transverse mixing of free flowing particles in horizontal rotating drums without inlets has been simulated by means of the Discrete Element Method (DEM) in two dimensions. In the simulations the drum diameter has been varied from 0.2 to 0.57 m, and the rotational frequency of the drum from 9.1 to 19.1 rpm, for drum loadings of 20% or 30%, and average particle diameters of 2.5 and 3.4 mm. The choice of operating parameters allows for comparison with experimental data from literature. Though simple models for inter-particle interactions have been implemented, the overall agreement is good. The results are presented and discussed in terms of mixing times and mixing numbers that means numbers of revolutions necessary for uniform mixing of the solids. In this way, comparison with penetration models, as typically applied to modelling of thermal processes, is possible. The limitations of such continuum models are pointed out, along with the potential of DEM to replace them, in the long term.

[1]  F. Maio,et al.  Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes , 2004 .

[2]  K. Schügerl,et al.  Transverse mixing and heat transfer in horizontal rotary drum reactors , 1977 .

[3]  J. K. Brimacombe,et al.  Experimental study of transverse bed motion in rotary kilns , 1983 .

[4]  P. A. Cundall,et al.  NUMERICAL MODELLING OF DISCONTINUA , 1992 .

[5]  Julio M. Ottino,et al.  Computational studies of granular mixing , 2000 .

[6]  Hani Henein,et al.  An analysis of radial segregation for different sized spherical solids in rotary cylinders , 1986 .

[7]  Jochen Mellmann,et al.  The transverse motion of solids in rotating cylinders—forms of motion and transition behavior , 2001 .

[8]  Brent R. Young,et al.  Modelling transverse mixing in a rolling drum , 2000 .

[9]  Brent R. Young,et al.  Comparison of transverse mixing kinetic data obtained from a rolling drum , 2001 .

[10]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[11]  Evangelos Tsotsas.  Remarks on the paper “Experimental determination of transverse mixing kinetics in a rolling drum by image analysis” by D.R. van Puyvelde, B.R. Young, M.A. Wilson and S.J. Smith (Powder Technology 106 (1999), 183–191) , 2001 .

[12]  Jpk Seville,et al.  Positron emission particle tracking studies of spherical particle motion in rotating drums , 1997 .

[13]  Jpk Seville,et al.  Granular motion in rotating drums: bed turnover time and slumping–rolling transition , 2002 .

[14]  J. K. Brimacombe,et al.  The modeling of transverse solids motion in rotary kilns , 1983 .

[15]  Masami Nakagawa,et al.  Steady particulate flows in a horizontal rotating cylinder , 1998 .

[16]  J. Bertrand,et al.  Powder mixing: Some practical rules applied to agitated systems , 1991 .

[17]  Brent R. Young,et al.  Experimental determination of transverse mixing kinetics in a rolling drum by image analysis , 1999 .

[18]  Paul W. Cleary,et al.  DEM simulation of industrial particle flows: case studies of dragline excavators, mixing in tumblers and centrifugal mills , 2000 .

[19]  Aibing Yu,et al.  Simulated and measured flow of granules in a bladed mixer—a detailed comparison , 2001 .

[20]  Kenji Yamane.  DEM Study of Segregation in a Rotating Cylinder , 2000 .

[21]  Gene R. Woodle,et al.  Particle motion and mixing in a rotary kiln , 1993 .

[22]  Paul W. Cleary,et al.  How well do discrete element granular flow models capture the essentials of mixing processes , 1998 .

[23]  E. Schlünder,et al.  Heat transfer to packed and stirred beds from the surface of immersed bodies , 1984 .

[24]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[25]  E. Schlünder,et al.  Vacuum Contact Drying of Free Flowing Mechanically Agitated Particulate Material , 1984 .

[26]  Gerald H. Ristow,et al.  Mixing and Segregation in Rotating Drums , 2000 .

[27]  A. Yu,et al.  Microdynamic analysis of particle flow in a horizontal rotating drum , 2003 .