Energy Efficiency in Mining: A Review with Emphasis on the Role of Operators in Loading and Hauling Operations

Abstract This paper presents a review of the literature on energy efficiency in mining with a specific emphasis on the role of operators in energy efficiency of loading and hauling operations. The objectives are to: (i) establish the current knowledge on energy efficiency in mining, in general; (ii) establish current knowledge on the role of the operator in energy efficiency of loading and hauling operations, specifically; and (iii) make recommendations for industrial best practice and future research directions to enhance energy efficiency in mining. The papers included in the review were selected through searches in major abstract databases using relevant keywords, with emphasis on recent peer-reviewed work. The review identified gaps in the literature and made recommendations for future research and industry best practice.

[1]  Santanu Bandyopadhyay,et al.  Water and energy assessment for dewatering in opencast mines , 2014 .

[2]  D. Bogunovic,et al.  Impact of bucket fill factor on dragline production rate and energy consumption , 2011 .

[3]  Dragan Komljenovic,et al.  Haul truck fuel consumption and CO 2 emission under various engine load conditions , 2010 .

[4]  Nawshad Haque,et al.  Energy and greenhouse gas impacts of mining and mineral processing operations , 2010 .

[5]  Samuel Frimpong,et al.  Cable shovel digging optimization for energy efficiency , 2007 .

[6]  Timothy J. Napier-Munn,et al.  Is progress in energy-efficient comminution doomed? , 2015 .

[7]  Feng Gao,et al.  Digging Trajectory Optimization for a New Excavating Mechanism of Electric Mining Shovel , 2012 .

[8]  Samuel Frimpong,et al.  Dragline dynamic modelling for efficient excavation , 2009 .

[9]  Walter Koellner,et al.  Increased productivity with AC drives for mining excavators and haul trucks , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[10]  L. B. Ristic,et al.  Fuzzy speed control of belt conveyor system to improve energy efficiency , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).

[11]  Lijun Zhang,et al.  Optimization of mine ventilation fan speeds according to ventilation on demand and time of use tariff , 2015 .

[12]  Kwame Awuah-Offei,et al.  Statistical methods for evaluating the effect of operators on energy efficiency of mining machines , 2014 .

[13]  O. Acaroglu,et al.  A fuzzy logic model to predict specific energy requirement for TBM performance prediction , 2008 .

[14]  Eric A. Lutz,et al.  Occupational Exposures to Emissions from Combustion of Diesel and Alternative Fuels in Underground Mining—A Simulated Pilot Study , 2015, Journal of occupational and environmental hygiene.

[15]  Samuel Frimpong,et al.  Mechanics of Cable Shovel-Formation Interactions in Surface Mining Excavations , 2005 .

[16]  Amit Kumar,et al.  Energy consumption and greenhouse gas emissions in the recovery and extraction of crude bitumen from Canada’s oil sands , 2015 .

[17]  Peter Op ‘t Veld,et al.  Minewater 2.0 project in Heerlen the Netherlands: transformation of a geothermal mine water pilot project into a full scale hybrid sustainable energy infrastructure for heating and cooling , 2014 .

[18]  D. D. Tannant,et al.  Operator and dipper tooth influence on electric shovel performance during oil sands mining , 2008 .

[19]  Dragan Komljenovic,et al.  Production, consumption and cost of energy for surface mining of bituminous coal , 2014 .

[20]  T. Kojovic,et al.  Influence of aggregate stemming in blasting on the SAG mill performance , 2005 .

[21]  Patrik Söderholm,et al.  Industrial electricity demand and energy efficiency policy: the case of the Swedish mining industry , 2014 .

[22]  Malcolm Powell,et al.  VertiMill® – Preparing the feed within floatable regime at lower specific energy , 2015 .

[23]  Santanu Bandyopadhyay,et al.  Benchmarking energy consumption for dump trucks in mines , 2014 .

[24]  Dragan Komljenovic,et al.  Dragline operator performance indicator , 2010 .

[25]  Peter Knights,et al.  Quantifying the benefits of simulator training for dragline operators , 2015 .

[26]  Kwame Awuah-Offei,et al.  A method for data-driven evaluation of operator impact on energy efficiency of digging machines , 2016 .

[27]  Vladislav Kecojevic,et al.  Evaluation of Rope Shovel Operators in Surface Coal Mining Using a Multi-Attribute Decision-Making Model , 2014 .

[28]  Amit Kumar,et al.  An energy benchmarking model for mineral comminution , 2014 .

[29]  J. A. Scott,et al.  Geothermal energy recovery from underground mines , 2011 .

[30]  Kwame Awuah-Offei,et al.  Effect of mine characteristics on life cycle impacts of US surface coal mining , 2012, The International Journal of Life Cycle Assessment.

[31]  M. Kleingeld,et al.  Energy efficiency through variable speed drive control on a cascading mine cooling system , 2014, 2014 International Conference on the Eleventh industrial and Commercial Use of Energy.

[32]  Josua P. Meyer,et al.  Energy and exergy analyses of energy consumptions in the industrial sector in South Africa , 2007 .

[33]  Benjamin C. McLellan,et al.  Renewable energy in the minerals industry: a review of global potential , 2012 .

[34]  Wei Zhou,et al.  A comparison of the energy consumption and carbon emissions for different modes of transportation in open-cut coal mines , 2015 .

[35]  J. F. van Rensburg,et al.  Implementing DSM interventions on water reticulation systems of marginal deep level mines , 2014, 2014 International Conference on the Eleventh industrial and Commercial Use of Energy.

[36]  T. LaClair,et al.  Modeling of Fuel Consumption for Heavy-Duty Trucks and the Impact of Tire Rolling Resistance , 2005 .

[37]  Smith,et al.  Can mine to mill optimisation succeed under complex constraints , 2007 .

[38]  Gianantonio Bortolin,et al.  Gear shift optimization for off-road construction vehicles , 2012 .

[39]  Feng Wu,et al.  Using Design of Experiment and Genetic Algorithm to Obtain the Optimum Gear Shifting Strategy for a Real Driving Cycles , 2012 .

[40]  Hui Hu,et al.  Energy Consumption and Carbon Dioxide Emissions of China’s Non-Metallic Mineral Products Industry: Present State, Prospects and Policy Analysis , 2014 .

[41]  Yosoon Choi,et al.  Optimal haulage routing of off-road dump trucks in construction and mining sites using Google Earth and a modified least-cost path algorithm , 2011 .

[42]  Malcolm Powell,et al.  Beyond mine-to-mill: Circuit design for energy efficient resource utilisation. , 2009 .

[43]  Hilary I. Inyang,et al.  Dynamic Modeling of Hydraulic Shovel Excavators for Geomaterials , 2008 .

[44]  Celal Karpuz,et al.  An investigation on the influence of depth of cut and blasting on shovel digging performance , 1992 .

[45]  Monica Carvalho,et al.  Optimal synthesis of energy supply systems for remote open pit mines , 2014 .

[46]  Chang Lu Zhao,et al.  Optimizing Operational Performance of Diesel Mining Truck Using Thermal Management , 2013 .

[47]  Marcel Kohler,et al.  Differential Electricity Pricing and Energy Efficiency in South Africa , 2014 .

[48]  M. Slade.  Valuing Managerial Flexibility: An Application of Real-Option Theory to Mining Investments , 2001 .

[49]  Terry E. Ackman,et al.  Underground Mine Water for Heating and Cooling using Geothermal Heat Pump Systems , 2006 .

[50]  Marcello M. Veiga,et al.  Reducing mine water network energy requirements. , 2010 .

[51]  Joy Mazumdar.  All electric operation of ultraclass mining haul trucks , 2013, 2013 IEEE Industry Applications Society Annual Meeting.

[52]  David Cebon,et al.  Factors influencing the energy consumption of road freight transport , 2010 .

[53]  Xiaohua Xia,et al.  Optimal energy management for a jaw crushing process in deep mines , 2014 .

[54]  Edward K. Morlok,et al.  Vehicle Speed Profiles to Minimize Work and Fuel Consumption , 2005 .

[55]  Xiaohua Xia,et al.  Modeling and energy efficiency optimization of belt conveyors , 2011 .

[56]  Dragan Komljenovic,et al.  Gyratory crusher model and impact parameters related to energy consumption , 2007 .

[57]  M. Kleingeld,et al.  The impact of reducing mine chilled water supply during periods of low production , 2014, 2014 International Conference on the Eleventh industrial and Commercial Use of Energy.

[58]  R. Minnitt,et al.  Optimization of diesel usage at Uitvlugt Mine , 2013 .

[59]  Nawshad Haque,et al.  The greenhouse gas footprint of in-situ leaching of uranium, gold and copper in Australia , 2014 .

[60]  Kwame Awuah-Offei,et al.  Modeling truck/shovel energy efficiency under uncertainty , 2011 .

[61]  Jiangfeng Zhang,et al.  An optimal control model for load shifting—with application in the energy management of a colliery , 2009 .

[62]  José P. Paredes-Sánchez,et al.  Solar water pumping system for water mining environmental control in a slate mine of Spain , 2015 .

[63]  Sue Vink,et al.  Water and energy synergy and trade-off potentials in mine water management , 2014 .

[64]  Dean L. Millar,et al.  Energy and mining – the home truths , 2014 .

[65]  Jacek Paraszczak,et al.  Renewable Energy Sources—A Promising Opportunity for Remote Mine Sites , 2012 .

[66]  Juliana Parreira,et al.  Autonomous Haulage Systems - Justification and Opportunity , 2011, AIS.

[67]  G Lumley.  Reducing the Variability in Dragline Operator Performance , 2005 .

[68]  Sue Vink,et al.  Application of an exergy approach to understand energy demand of mine water management options , 2014 .

[69]  Rui Sun,et al.  A path-tracking intelligent optimizating for the LHD units , 2008, 2008 9th International Conference on Signal Processing.

[70]  Ana Casali,et al.  Modelling SAG milling power and specific energy consumption including the feed percentage of intermediate size particles , 2015 .