A corehole sampling project utilizing a wireline coring system provided sediment samples for microbiological characterization from deep unconsolidated sediments. Sampling tools were developed or modified to minimize contamination during sample acquisition and to facilitate stringent decontamination requirements. Quality assurance procedures, including the use of tracers, were implemented to minimize and quantify contamination from drilling hardware, drilling fluids and sample processing. Tracers included microspheres, potassium bromide, rhodamine dye, and perfluorocarbons, which enabled the detection and measurement of 1mg of drilling fluid per kg of sediment. In addition, sample processing was performed on-site in an anaerobic chamber to prevent exposure of the subsurface materials to atmospheric oxygen concentrations. Sediment samples were then disbursed to investigators at National Laboratories and universities funded through the Department of Energy Subsurface Science Microbiology Program for microbiological characterization. Results of these efforts demonstrated that representative subsurface samples were collected and disbursed.
[1]
R. E. Beeman,et al.
Evaluation of deep subsurface sampling procedures using serendipitous microbial contaminants as tracer organisms
,
1989
.
[2]
D. Balkwill,et al.
Microbial life in deep terrestrial subsurfaces
,
1989
.
[3]
T. Phelps,et al.
Methods for recovery of deep terrestrial subsurface sediments for microbiological studies
,
1989
.
[4]
R. Clark.
A New Continuous‐Sampling Wireline System for Acquisition of Uncontaminated, Minimally Disturbed Soil Samples
,
1988
.
[5]
W. Ghiorse,et al.
Distribution of aerobic bacteria, protozoa, algae, and fungi in deep subsurface sediments
,
1989
.
[6]
David L. Balkwill,et al.
Numbers, diversity, and morphological characteristics of aerobic, chemoheterotrophic bacteria in deep subsurface sediments from a site in South Carolina
,
1989
.
[7]
Tommy J. Phelps,et al.
Microbial activities in deep subsurface environments
,
1988
.