DSP-Based Sensorless Electric Motor Fault Diagnosis Tools for Electric and Hybrid Electric Vehicle Powertrain Applications

The integrity of electric motors in work and passenger vehicles can best be maintained by frequently monitoring its condition. In this paper, a signal processing-based motor fault diagnosis scheme is presented in detail. The practicability and reliability of the proposed algorithm are tested on rotor asymmetry detection at zero speed, i.e., at startup and idle modes in the case of a vehicle. Regular rotor asymmetry tests are done when the motor is running at a certain speed under load with stationary current signal assumption. It is quite challenging to obtain these regular test conditions for long-enough periods of time during daily vehicle operations. In addition, automobile vibrations cause nonuniform air-gap motor operation, which directly affects the inductances of electric motors and results in a noisy current spectrum. Therefore, it is challenging to apply conventional rotor fault-detection methods while examining the condition of electric motors as part of the hybrid electric vehicle (HEV) powertrain. The proposed method overcomes the aforementioned problems by simply testing the rotor asymmetry at zero speed. This test can be achieved at startup or repeated during idle modes where the speed of the vehicle is zero. The proposed method can be implemented at no cost using the readily available electric motor inverter sensors and microprocessing unit. Induction motor fault signatures are experimentally tested online by employing the drive-embedded master processor (TMS320F2812 DSP) to prove the effectiveness of the proposed method.

[1]  H. A. Toliyat,et al.  Performance Analysis of a Three-Phase Induction Motor under Mixed Eccentricity Condition , 2002, IEEE Power Engineering Review.

[2]  H.A. Toliyat,et al.  Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review , 2005, IEEE Transactions on Energy Conversion.

[3]  David G. Dorrell,et al.  Analysis of airgap flux, current and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[4]  Mohamed Benbouzid,et al.  A review of induction motors signature analysis as a medium for faults detection , 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

[5]  C. Kral,et al.  Detection of rotor faults in squirrel cage induction machines at standstill for batch tests by means of the Vienna monitoring method , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[6]  G. B. Kliman,et al.  Noninvasive detection of broken rotor bars in operating induction motors , 1988 .

[7]  Demba Diallo,et al.  Advanced Fault-Tolerant Control of Induction-Motor Drives for EV/HEV Traction Applications: From Conventional to Modern and Intelligent Control Techniques , 2007, IEEE Transactions on Vehicular Technology.

[8]  Babak Fahimi,et al.  Special Section on Automotive Electromechanical Converters , 2007, IEEE Trans. Veh. Technol..

[9]  Alan V. Oppenheim,et al.  Discrete-time Signal Processing. Vol.2 , 2001 .

[10]  T. G. Habetler,et al.  Stator current harmonics and their causal vibrations: a preliminary investigation of sensorless vibration monitoring applications , 1999 .

[11]  N. Bianchi,et al.  Design of a fault-tolerant IPM motor for electric power steering , 2006, IEEE Transactions on Vehicular Technology.

[12]  John M. Miller,et al.  Propulsion Systems for Hybrid Vehicles , 2003 .

[13]  Ronald K. Jurgen.  On- and off-board diagnostics , 2000 .

[14]  T.G. Habetler,et al.  Motor bearing damage detection using stator current monitoring , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[15]  Babak Fahimi,et al.  Monitoring and Fault Diagnosis of Multiconverter Systems in Hybrid Electric Vehicles , 2006, IEEE Transactions on Vehicular Technology.

[16]  L. Eren,et al.  Detecting motor bearing faults , 2004, IEEE Instrumentation & Measurement Magazine.

[17]  H. Henao,et al.  Detection of induction machines rotor faults at standstill using signals injection , 2004, IEEE Transactions on Industry Applications.

[18]  F. Filippetti,et al.  AI techniques in induction machines diagnosis including the speed ripple effect , 1996 .