A critical review on the influence of energy, environmental and economic factors on various processes used to handle and recycle plastic wastes: Development of a comprehensive index

Abstract The conventional methods of waste disposal, namely landfill and recycling, are associated with environmental and economic inefficiencies. The associated policies and regulations are also found to be inadequate in relation to the current situation. The situation of plastic handling-related policies in India was reviewed in this regard. Alternative techniques such as liquefaction, biological treatment, pyrolysis and incorporation of plastics in road laying have received increased attention in recent years. This paper reviews the fundamentals of each process and offers a clear picture of plastic generation and disposal. The present review also focuses on the benefits and drawbacks of different disposal methods by comparing the methods over several economic, environmental and energy parameters. A comprehensive Energy, Economy and Environmental index (EEE index) has been developed in this study to compare the different methods and reconcile the various parameters based on which the comparison was performed. Incorporation of plastic waste in concrete structures and road pavements were found to be the best methods of plastic waste disposal, with an EEE index score of 42.85%. These two methods were followed by pyrolysis and liquefaction of waste plastic with scores of 23.08% each. Landfill, with an EEE index of −7.14%, was found to be the least holistic method of waste disposal and needs to be minimized wherever possible.

[1]  Stana Živanović,et al.  Mechanical properties of concrete reinforced with recycled HDPE plastic fibres , 2016 .

[2]  Shuzhong Wang,et al.  Catalytic hydrothermal liquefaction of algae and upgrading of biocrude: A critical review , 2018, Renewable and Sustainable Energy Reviews.

[3]  Hiroshi Uematsu,et al.  Waste plastics recycling process using coke ovens , 2003 .

[4]  J. Arnold,et al.  Environmental impact of pyrolysis of mixed WEEE plastics part 1: Experimental pyrolysis data. , 2011, Environmental science & technology.

[5]  Tae-Young Mun,et al.  Production of low-tar producer gas from air gasification of mixed plastic waste in a two-stage gasifier using olivine combined with activated carbon , 2013 .

[6]  J. Winandy,et al.  Considerations in recycling of wood-plastic composites , 2004 .

[7]  A. Kelkar,et al.  Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor , 2015 .

[8]  A. McDonald,et al.  Evaluation of pyrolysis process parameters on polypropylene degradation products , 2014 .

[9]  S. Babu,et al.  Durability and Bonding Characteristics of Plastic Aggregate Concrete , 2015 .

[10]  H. Khelafi,et al.  Effect of incorporating PVC waste as aggregate on the physical, mechanical, and chloride ion penetration behavior of concrete , 2015 .

[11]  Xuliang Yang,et al.  Pyrolysis and co-pyrolysis of lignite and plastic , 2014 .

[12]  M. Maslehuddin,et al.  Thermal-resistant lightweight concrete with polyethylene beads as coarse aggregates , 2018 .

[13]  G. Zeng,et al.  (Micro)plastic crisis: Un-ignorable contribution to global greenhouse gas emissions and climate change , 2020 .

[14]  Tristan R. Brown,et al.  Estimating profitability of two biochar production scenarios: slow pyrolysis vs fast pyrolysis , 2011 .

[15]  Chao Sun,et al.  Study on the synthesis and thermal degradation of vinylphenylpolysilsesquioxane , 2018 .

[16]  M. Mastellone,et al.  Tar removal during the fluidized bed gasification of plastic waste. , 2009, Waste management.

[17]  Tayfun Uygunoğlu,et al.  Properties of autoclaved lightweight aggregate concrete , 2007 .

[18]  C. A. Bernardo,et al.  Environmental and economic life cycle analysis of plastic waste management options. A review , 2016 .

[19]  Wengang Zhang.  MARS Use in Assessment of Soil Liquefaction Based on Capacity Energy Concept , 2019, MARS Applications in Geotechnical Engineering Systems.

[20]  Deming Zhang,et al.  Evolution of pore structure and produced gases of Zhundong coal particle during gasification in supercritical water , 2018, The Journal of Supercritical Fluids.

[22]  P. Frediani,et al.  Efficient disposal of waste polyolefins through microwave assisted pyrolysis , 2014 .

[23]  M. Rillig,et al.  Microplastics as an emerging threat to terrestrial ecosystems , 2018, Global change biology.

[24]  Claudia Menzel,et al.  Tackling the plastic problem: A review on perceptions, behaviors, and interventions. , 2019, The Science of the total environment.

[25]  Jaroslav Kusý,et al.  Pyrolysis Process Of Waste Polyethyleneterephtalate , 2009 .

[26]  Pooja Yadav,et al.  Life Cycle Assessment of the existing and proposed plastic waste management options in India: A case study , 2019, Journal of Cleaner Production.

[27]  Maria Laura Mastellone,et al.  Olivine as a tar removal catalyst during fluidized bed gasification of plastic waste , 2008 .

[28]  A. Kaya,et al.  Properties of concrete containing waste expanded polystyrene and natural resin , 2016 .

[29]  Shu-lin Chen,et al.  Recent development of hydrothermal liquefaction for algal biorefinery , 2020 .

[30]  Stjepan Lakusic,et al.  Use of e-plastic waste in bituminous pavements , 2018, Journal of the Croatian Association of Civil Engineers.

[31]  Kunio Yoshikawa,et al.  Coal alternative fuel production from municipal solid wastes employing hydrothermal treatment , 2012 .

[32]  M. Irfan,et al.  Hydrocracking of virgin and waste plastics: A detailed review , 2018, Renewable and Sustainable Energy Reviews.

[33]  Mehmet Gesoǧlu,et al.  Strength and permeability properties of self-compacting concrete with cold bonded fly ash lightweight aggregate , 2015 .

[34]  Tae-Young Mun,et al.  Air gasification of mixed plastic wastes using calcined dolomite and activated carbon in a two-stage gasifier to reduce tar , 2013 .

[35]  J. Paes,et al.  Production of wood-plastic composites using cedrela odorata sawdust waste and recycled thermoplastics mixture from post-consumer products - A sustainable approach for cleaner production in Cuba , 2020 .

[36]  B. Şimşek,et al.  A full factorial‐based desirability function approach to investigate optimal mixture ratio of polymer concrete , 2018 .

[37]  Ryo Yoshiie,et al.  Tar and soot generation behaviors from ABS, PC and PE pyrolysis , 2017 .

[38]  Joo-Sik Kim,et al.  Three-stage air gasification of waste polyethylene: In-situ regeneration of active carbon used as a tar removal additive , 2019, Energy.

[39]  M. Masud,et al.  Towards the effective plastic waste management in Bangladesh: a review , 2017, Environmental Science and Pollution Research.

[40]  Changsen Zhang,et al.  Evaluation of process parameters on high-density polyethylene hydro-liquefaction products , 2018, Journal of Analytical and Applied Pyrolysis.

[41]  Z. Ge,et al.  The Effect of Modifying Agents on the Mechanical Properties of Straw Flour/Waste Plastic Composite Materials , 2016 .

[42]  Nandakishore Rajagopalan,et al.  Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags ☆ , 2014 .

[43]  Wan Mohd Ashri Wan Daud,et al.  Energy recovery from pyrolysis of plastic waste: Study on non-recycled plastics (NRP) data as the real measure of plastic waste , 2017 .

[44]  Su-Hwa Jung,et al.  Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor , 2010 .

[45]  Kunio Yoshikawa,et al.  Fuel Oil Production from Municipal Plastic Wastes in Sequential Pyrolysis and Catalytic Reforming Reactors , 2014 .

[46]  P. Duggal,et al.  Use of Waste Plastic in Wearing Course of Flexible Pavement , 2019, Lecture Notes in Civil Engineering.

[47]  A. Pütün,et al.  Utilization of Two Different Types of Plastic Wastes from Daily and Industrial Life , 2013 .

[48]  J. Jamradloedluk,et al.  on Intelligent Manufacturing and Automation , 2013 Characterization and Utilization of Char Derived from Fast Pyrolysis of Plastic Wastes , 2014 .

[49]  Iman M. Nikbin,et al.  An experimental investigation on the erosion resistance of concrete containing various PET particles percentages against sulfuric acid attack , 2015 .

[50]  S. M. Fakhrhoseini,et al.  Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model , 2013 .

[51]  Mario Grosso,et al.  Environmental evaluation of plastic waste management scenarios , 2014 .

[52]  Sunil Kumar,et al.  Challenges associated with plastic waste disposal and allied microbial routes for its effective degradation: A comprehensive review , 2019, Journal of Cleaner Production.

[53]  Hui Wang,et al.  A novel process for separation of hazardous poly(vinyl chloride) from mixed plastic wastes by froth flotation. , 2017, Waste management.

[54]  F. Obeid,et al.  Thermo-catalytic pyrolysis of waste polyethylene bottles in a packed bed reactor with different bed materials and catalysts , 2014 .

[55]  G. Kumar,et al.  A sustainable approach: Utilization of waste PVC in asphalting of roads , 2014 .

[56]  Jasmin Shah,et al.  Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems , 2010 .

[57]  Chao Miao,et al.  Impact of reaction conditions on the simultaneous production of polysaccharides and bio-oil from heterotrophically grown Chlorella sorokiniana by a unique sequential hydrothermal liquefaction process. , 2012, Bioresource technology.

[58]  Charles Mbohwa,et al.  Drivers to Sustainable Plastic Solid Waste Recycling: A Review , 2017 .

[59]  Onwughara Innocent Nkwachukwu,et al.  Focus on potential environmental issues on plastic world towards a sustainable plastic recycling in developing countries , 2013, International Journal of Industrial Chemistry.

[60]  M. Hodson,et al.  Plastic Bag Derived-Microplastics as a Vector for Metal Exposure in Terrestrial Invertebrates. , 2017, Environmental science & technology.

[61]  Michael Burrow,et al.  Using Waste Plastics in Road Construction , 2019 .

[62]  Changqing Cao,et al.  Experimental investigation on liquefaction of plastic waste to oil in supercritical water. , 2019, Waste management.

[63]  S. Sreenath,et al.  Properties of concrete modified with waste Low Density Polyethylene and saw dust ash , 2017 .

[64]  W. Yuan,et al.  Co-pyrolysis of residual oil and polyethylene in sub- and supercritical water , 2013 .

[65]  P. García,et al.  Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time , 2002 .

[66]  J. Seay,et al.  Reverse engineering of plastic waste into useful fuel products , 2018 .

[67]  Mohammad Rehan,et al.  Effect of plastic waste types on pyrolysis liquid oil , 2017 .

[68]  N. Miskolczi,et al.  Fuels by pyrolysis of waste plastics from agricultural and packaging sectors in a pilot scale reactor , 2009 .

[69]  Raghu Raman Rajagopal,et al.  Composite panels obtained from automotive waste plastics and agricultural macadamia shell waste , 2017 .

[70]  O. Chavalparit,et al.  3Rs Policy and plastic waste management in Thailand , 2018, Journal of Material Cycles and Waste Management.

[71]  J. Hahladakis,et al.  Delineating the plastic waste status in the State of Qatar: Potential opportunities, recovery and recycling routes. , 2019, The Science of the total environment.

[72]  Piyush Singhal,et al.  Alternate Strategies for Conversion of Waste Plastic to Fuels , 2013 .

[73]  H. Tan,et al.  Synergistic effects during co-pyrolysis of biomass and plastic: Gas, tar, soot, char products and thermogravimetric study , 2017, Journal of the Energy Institute.

[74]  G. Lopez,et al.  Influence of FCC catalyst steaming on HDPE pyrolysis product distribution , 2009 .

[75]  Gopalakrishnan Kumar,et al.  Impervious and influence in the liquid fuel production from municipal plastic waste through thermo-chemical biomass conversion technologies - A review. , 2020, The Science of the total environment.

[76]  Lars-André Tokheim,et al.  Experimental Study of Thermal and Catalytic Pyrolysis of Plastic Waste Components , 2018, Sustainability.

[77]  N. Miskolczi,et al.  Kinetic Modeling of Plastic Waste Pyrolysis in a Laboratory Scale Two-stage Reactor , 2018 .

[78]  Yusuf Kurt,et al.  Comparison of Tar Produced by Traditional and Laboratory Methods , 2012 .

[79]  Biswajit Ruj,et al.  Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste , 2016 .

[80]  C. Vasile,et al.  Thermal and catalytic decomposition of mixed plastics , 2001 .

[81]  Robin Kirschbaum,et al.  Questions and answers , 2009, Diabetes, obesity & metabolism.

[82]  Richard C. Thompson,et al.  Plastics, the environment and human health: current consensus and future trends , 2009, Philosophical Transactions of the Royal Society B: Biological Sciences.

[83]  R. Vasudevan,et al.  A technique to dispose waste plastics in an ecofriendly way – Application in construction of flexible pavements , 2012 .

[84]  Kostas S. Triantafyllidis,et al.  Pilot-scale validation of Co-ZSM-5 catalyst performance in the catalytic upgrading of biomass pyrolysis vapours , 2014 .

[85]  L. Yin,et al.  High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas-liquid fluidized bed reactor. , 2014, Waste management.

[86]  T. Knowles,et al.  Co-liquefaction of Macroalgae with Common Marine Plastic Pollutants , 2019, ACS Sustainable Chemistry & Engineering.

[87]  S M Al-Salem,et al.  A review on thermal and catalytic pyrolysis of plastic solid waste (PSW). , 2017, Journal of environmental management.

[88]  Kejing Wu,et al.  Co-liquefaction of microalgae and polypropylene in sub-/super-critical water , 2017 .

[89]  Youn-Joo An,et al.  Current research trends on plastic pollution and ecological impacts on the soil ecosystem: A review. , 2018, Environmental pollution.

[90]  Rui Li,et al.  Catalytic hydroprocessing of microalgae-derived biofuels: a review , 2016 .

[91]  P. Williams,et al.  Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixtures , 2007 .

[92]  S. Yusup,et al.  Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene , 2014 .

[93]  G. Sakellaropoulos,et al.  Pyrolysis kinetics and combustion characteristics of waste recovered fuels , 2009 .

[94]  F. Abnisa,et al.  A review on pyrolysis of plastic wastes , 2016 .

[95]  Paul T. Williams,et al.  Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time , 2009 .

[96]  A. Bridgwater,et al.  Review of physicochemical properties and analytical characterization of lignocellulosic biomass , 2017 .

[97]  Liliana Ivette Ávila Córdoba,et al.  Recycled polycarbonate from electronic waste and its use in concrete: Effect of irradiation , 2019, Construction and Building Materials.

[98]  V. Geissen,et al.  Field evidence for transfer of plastic debris along a terrestrial food chain , 2017, Scientific Reports.

[99]  Joan Wu,et al.  Thermal behavior and kinetic study for catalytic co-pyrolysis of biomass with plastics. , 2016, Bioresource technology.

[100]  M. Srinivasan,et al.  Solvothermal co-liquefaction of sugarcane bagasse and polyethylene under sub-supercritical conditions: Optimization of process parameters , 2020 .

[101]  Jorge de Brito,et al.  Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate , 2014 .

[102]  C. Chuck,et al.  Co-processing of common plastics with pistachio hulls via hydrothermal liquefaction. , 2019, Waste management.

[103]  Jalal J. Jafar,et al.  Utilisation of waste plastic in bituminous mix for improved performance of roads , 2016 .

[104]  Mohammad Rehan,et al.  Catalytic pyrolysis of plastic waste: A review , 2016 .

[105]  N. Ngadi,et al.  Current state and future prospects of plastic waste as source of fuel: A review , 2015 .

[106]  Rahul Singh,et al.  Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective , 2010 .