Comparison of marginal and internal fit of 3-unit ceramic fixed dental prostheses made with either a conventional or digital impression.

[1]  Tamer Abdelazim Mellik,et al.  Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scanners. , 2015, The Journal of prosthetic dentistry.

[2]  M. Cune,et al.  Digital versus analog complete-arch impressions for single-unit premolar implant crowns: Operating time and patient preference. , 2015, The Journal of prosthetic dentistry.

[3]  S. Jian,et al.  Intraoral Digital Impression Technique: A Review. , 2015, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[4]  Evanthia Anadioti,et al.  Internal fit of pressed and computer-aided design/computer-aided manufacturing ceramic crowns made from digital and conventional impressions. , 2015, The Journal of prosthetic dentistry.

[5]  Seok-Hwan Cho,et al.  Comparison of accuracy and reproducibility of casts made by digital and conventional methods. , 2015, The Journal of prosthetic dentistry.

[6]  B. Wöstmann,et al.  Accuracy of single-tooth restorations based on intraoral digital and conventional impressions in patients , 2015, Clinical Oral Investigations.

[7]  Francisco Martínez-Rus,et al.  Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions , 2015, Clinical Oral Investigations.

[8]  C. Wyatt,et al.  A comparison of the marginal fit of crowns fabricated with digital and conventional methods. , 2014, The Journal of prosthetic dentistry.

[9]  Göran Sjögren,et al.  Accuracy of ceramic restorations made using an in-office optical scanning technique: an in vitro study. , 2014, Operative dentistry.

[10]  Daniel Edelhoff,et al.  Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization--a laboratory study. , 2014, Dental materials : official publication of the Academy of Dental Materials.

[11]  Surender Kumar,et al.  An In Vitro Study of the Bond Strength of Five Adhesives Used for Vinyl Polysiloxane Impression Materials and Tray Materials , 2014, Journal of Indian Prosthodontic Society.

[12]  Paul Seelbach,et al.  Accuracy of digital and conventional impression techniques and workflow , 2012, Clinical Oral Investigations.

[13]  Stefan Wolfart,et al.  The clinical accuracy of single crowns exclusively fabricated by digital workflow—the comparison of two systems , 2013, Clinical Oral Investigations.

[14]  D. Edelhoff,et al.  Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques , 2013, Clinical Oral Investigations.

[15]  Eduardo Piza Pellizzer,et al.  Optical Impression Systems for CAD-CAM Restorations , 2012, The Journal of craniofacial surgery.

[16]  Roberto Scotti,et al.  WITHDRAWN: Clinical fitting of CAD/CAM zirconia single crowns generated from digital intraoral impressions based on active wavefront sampling. , 2011, Journal of dentistry.

[17]  Andreas Syrek,et al.  Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling. , 2010, Journal of dentistry.

[18]  Rainer Koch,et al.  Randomized controlled clinical study on the accuracy of two-stage putty-and-wash impression materials. , 2009, The International journal of prosthodontics.

[19]  Lapo Governi,et al.  A Comparative Analysis Of Intraoral 3d Digital Scanners For Restorative Dentistry , 2008 .

[20]  June-Sung Shim,et al.  The effect of several dentin desensitizers on shear bond strength of adhesive resin luting cement using self-etching primer. , 2008, Journal of dentistry.

[21]  M. Balkenhol,et al.  Effect of different retraction and impression techniques on the marginal fit of crowns. , 2008, Journal of dentistry.

[22]  M. Roos,et al.  Clinical study of the internal gaps of zirconia and metal frameworks for fixed partial dentures. , 2008, European journal of oral sciences.

[23]  J Dejou,et al.  Clinical evaluation of the marginal fit of cast crowns--validation of the silicone replica method. , 2007, Journal of oral rehabilitation.

[24]  Werner H. Moörmann.  The evolution of the CEREC system , 2006 .

[25]  E. D. Rekow,et al.  Dental CAD/CAM systems: a 20-year success story. , 2006, Journal of the American Dental Association.

[26]  C Ohkubo,et al.  Clinical marginal and internal gaps of Procera AllCeram crowns. , 2005, Journal of oral rehabilitation.

[27]  R Luthardt,et al.  Design and production of dental prosthetic restorations: basic research on dental CAD/CAM technology. , 2002, International journal of computerized dentistry.

[28]  K. Boening,et al.  Clinical fit of Procera AllCeram crowns. , 2000, The Journal of prosthetic dentistry.

[29]  Steven M. Morgano,et al.  The effect of temperature changes on the dimensional stability of polyvinyl siloxane and polyether impression materials. , 1998, The Journal of prosthetic dentistry.

[30]  J Chai,et al.  A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. , 1997, The International journal of prosthodontics.

[31]  S Karlsson,et al.  The fit of Procera titanium crowns. An in vitro and clinical study. , 1993, Acta odontologica Scandinavica.

[32]  S. Bayne,et al.  Considerations in measurement of marginal fit. , 1989, The Journal of prosthetic dentistry.

[33]  G Oilo,et al.  The fit of metal-ceramic crowns, a clinical study. , 1985, Dental materials : official publication of the Academy of Dental Materials.

[34]  M I MacEntee,et al.  Fit of three porcelain-fused-to-metal marginal designs in vivo: a scanning electron microscope study. , 1985, The Journal of prosthetic dentistry.

[35]  J. Mclean,et al.  The estimation of cement film thickness by an in vivo technique , 1971, British Dental Journal.