Ultraviolet-visible ellipsometry for process control during the etching of submicrometer features

Microelectronics processing of ultralarge-scale-integration devices, which use increasingly thinner films and deep submicrometer design rules, requires sensitive diagnostic techniques to achieve tight process control. Film thickness and etched profiles are commonly characterized by postprocess and/or destructive techniques such as cross-sectional scanning electron microscopy. Because of its sensitivity and compatibility with plasma processing environments, in situ spectroscopic ellipsometry has become an extremely useful diagnostic for plasma etching applications, but until recently it was thought to require a sacrificial, unpatterned area on the wafer to provide film thickness information. We show that the applications of ellipsometry in microelectronics are no longer restricted to the control of uniform films or to unpatterned areas dedicated to film thickness measurement but extend also to monitoring the etching of multilayer stacks during the fabrication of submicrometer devices or gratings with high aspect ratios. Some new interpretation models are developed and presented.

[1]  C. W. Jurgensen,et al.  Microscopic uniformity in plasma etching , 1992 .

[2]  N. Gallagher,et al.  Analysis of a strip-grating twist reflector , 1990 .

[3]  Fred P. Klemens,et al.  Comparison of advanced plasma sources for etching applications. I. Etching rate, uniformity, and profile control in a helicon and a multiple electron cyclotron resonance source , 1994 .

[4]  H. Nguyen,et al.  Real time spectroscopic ellipsometry for characterization of thin film optical properties and microstructural evolution , 1991 .

[5]  R. M. A. Azzam,et al.  Polarization Characteristics of Scattered Radiation from a Diffraction Grating by Ellipsometry with Application to Surface Roughness , 1972 .

[6]  S. W. Butler,et al.  In situ spectral ellipsometry for real‐time thickness measurement: Etching multilayer stacks , 1993 .

[7]  Polarization dependence of the electromagnetic field distribution across wavelength-sized relief grating surfaces , 1993 .

[8]  P. Heimann.  Optical Etch‐Rate Monitoring Using Active Device Areas: Lateral Interference Effects , 1985 .

[9]  R. E. Nahory,et al.  Growth of AlxGa1−xAs parabolic quantum wells by real‐time feedback control of composition , 1992 .

[10]  T. Gaylord,et al.  Diffraction analysis of dielectric surface-relief gratings , 1982 .

[11]  H. Bertoni,et al.  Analysis of periodic thin-film structures with rectangular profiles☆ , 1974 .

[12]  E. Irene.  Applications of spectroscopic ellipsometry to microelectronics , 1993 .

[13]  P. Heimann,et al.  Optical Etch‐Rate Monitoring: Computer Simulation of Reflectance , 1984 .

[14]  J. Kruskal,et al.  Use of light scattering in characterizing reactively ion etched profiles , 1991 .

[15]  Devdas M. Pai,et al.  Analysis of dielectric gratings of arbitrary profiles and thicknesses , 1991 .

[16]  G. Oehrlein,et al.  In situ ellipsometry and reflectometry during etching of patterned surfaces: Experiments and simulations , 1992 .