Towards Enhancing the Potential of Injection Molding Tools through Optimized Close-Contour Cooling and Additive Manufacturing

This work deals with the parametric optimization of the position and form of a conformal cooling used in the injection molding industry. Based on a literature survey, an optimization routine concerning the parameter optimization of cooling system designs was developed and implemented with the help of the software package Moldflow. The main objective of the optimization is to reduce the cooling time; the second is to obtain an optimized homogeneous temperature distribution over the complete tool surface. To enable a comparison of the new close-contour solution with a classical manufacturing process, an optimized cooling system simulation, based on a conventional manufacturing solution, was established. It can be shown that the optimized close-contour cooling design offers significant advantages that cannot be exploited using classical manufacturing. Finally, the additive manufacturing of a prototype in the framework of powder bed fusion is documented as a proof of concept.

[1]  Hong-Seok Park,et al.  Development of a Smart Plastic Injection Mold with Conformal Cooling Channels , 2017 .

[2]  Nielen Stander,et al.  On the robustness of a simple domain reduction scheme for simulation‐based optimization , 2002 .

[3]  Changyong Liu,et al.  Experimental comparison of the flow rate and cooling performance of internal cooling channels fabricated via selective laser melting and conventional drilling process , 2018 .

[4]  Jan A. Snyman,et al.  The LFOPC leap-frog algorithm for constrained optimization , 2000 .

[5]  Yvon Jarny,et al.  Optimal cooling design in injection moulding process – A new approach based on morphological surfaces , 2013 .

[6]  Jan A. Snyman.  An improved version of the original leap-frog dynamic method for unconstrained minimization: LFOP1(b) , 1983 .

[7]  Christian Hopmann,et al.  Inverse thermal mold design for injection molds , 2018 .

[8]  Francesco Trevisan,et al.  Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys , 2016, Metallurgical and Materials Transactions A.

[9]  Charlie C. L. Wang,et al.  Automatic design of conformal cooling circuits for rapid tooling , 2011, Comput. Aided Des..

[10]  Charlie C. L. Wang,et al.  Spiral and conformal cooling in plastic injection molding , 2015, Comput. Aided Des..

[11]  Xinyu Wang,et al.  Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding Based on BEM , 2018 .

[12]  Hadley Brooks,et al.  Design of conformal cooling layers with self-supporting lattices for additively manufactured tooling , 2016 .

[13]  Martin Leary,et al.  SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices , 2016 .