Silver-based reflective coatings for micromachined optical filters

Silver films of 40 nm thickness, evaporated on a 300 nm thick low-stress silicon nitride layer, are used as high-quality mirrors operating in the visible and near IR spectral range. Application of a silicon nitride membrane under tension, placed within a square Si frame after bulk micromachining, improves the initial mirror flatness. Two parallel mirrors, each with square aperture of up to 2 × 2 mm2 and an electrostatically controlled spacing, form a tunable Fabry-Perot optical filter. Investigation of the silver-based reflective coatings, and mirror characterization, including influence of bulk micromachining, are presented.

[1]  D. Ciarlo,et al.  A Fabry-Perot microinterferometer for visible wavelengths , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[2]  E. Mozdy,et al.  Surface micromachined Fabry-Perot tunable filter , 1996, IEEE Photonics Technology Letters.

[3]  R. Wolffenbuttel,et al.  Optical properties of thin-film silicon-compatible materials. , 1997, Applied optics.

[4]  James W. Holm-Kennedy,et al.  Novel monolithic chip-integrated color spectrometer: the distributed-wavelength filter component , 1991, Optics & Photonics.

[5]  H. Macleod,et al.  Thin-Film Optical Filters , 1969 .

[6]  Miss A.O. Penney.  (b) , 1974, The New Yale Book of Quotations.

[7]  H A Macleod,et al.  Progress in the development of a durable silver-based high-reflectance coating for astronomical telescopes. , 1985, Applied optics.

[8]  Y. Lo,et al.  Surface micromachined long wavelength LED/photodetector with a continuous tuning range of 75 nm , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[9]  B. Van Zeghbroeck,et al.  Fabrication and analysis of Si/SiO2 micro-mechanical modulators , 1996, Digest IEEE/Leos 1996 Summer Topical Meeting. Advanced Applications of Lasers in Materials and Processing.