The acting force on the roll system of Sendzimir mill was analyzed using 3D FEM. The roll gap pressure distribution and the acting force between rolls S andO, rollsO and I, rollsO and J, rolls I and A, rolls I and B, as well as rolls J and B were analyzed. The results showed that the roll gap pressure mainly affected the roll surface layer, 50 mm for backup roll; the roll gap pressure distribution is of double peaks among the work roll, the 1st inteimediate roll (IMR), and the 2nd IMR; the maximum value of the roll gap pressure between the backup roll and the second IMR appears on the edge of the barrel of rolls; the component force presents the in-para-curve distribution. These are important for reducing the wear of rolls and the break of the backup roll and guiding for production.
[1]
John Ringwood,et al.
Robust shape control in a sendzimir cold-rolling steel mill
,
1996
.
[2]
Xianghua Liu,et al.
Contact Element Method with Two Relative Coordinates and Its Application to Prediction of Strip Profile of a Sendzimir Mill
,
2007
.
[3]
SIMULATION ANALYSIS OF DOUBLE NORMAL PRESSURE PEAKS
,
2001
.
[4]
Toshiro Yamada,et al.
Shape Controllability for Quarter Buckles of Strip in 20-high Sendzimir Mills
,
1991
.
[5]
Xiang-hua Liu,et al.
Analysis of rolls deflection of Sendzimir mill by 3D FEM
,
2007
.
[6]
M. J. Grimble,et al.
Static model for Sendzimir cold-rolling mill
,
1981
.