Improved morphology for ohmic contacts to AlGaN/GaN high electron mobility transistors using WSix- or W-based metallization

A comparison was made of specific contact resistivity and morphology of Ti/Al/Pt/WSi/Ti/Au and Ti/Al/Pt/W/Ti/Au ohmic contacts to AlGaN/GaN heterostructures relative to the standard Ti/Al/Pt/Au metallization. The W- and WSi-based contacts show comparable specific resistivities to that of the standard contact on similar layer structures, reaching minimum values of ∼10−5 Ω cm2 after annealing in the range 850–900 °C. However, the W- and WSi-based contacts exhibit much smoother surface morphologies, even after 950 °C annealing. For example, the root-mean-square roughness of the Ti/Al/Pt/WSi/Ti/Au contact annealed at 950 °C was unchanged from the as-deposited values whereas the Ti/Al/Pt/Au contact shows significant deterioration of the morphology under these conditions. The improved thermal stability of the W- and WSix-based contacts is important for maintaining edge acuity during high-temperature operation.A comparison was made of specific contact resistivity and morphology of Ti/Al/Pt/WSi/Ti/Au and Ti/Al/Pt/W/Ti/Au ohmic contacts to AlGaN/GaN heterostructures relative to the standard Ti/Al/Pt/Au metallization. The W- and WSi-based contacts show comparable specific resistivities to that of the standard contact on similar layer structures, reaching minimum values of ∼10−5 Ω cm2 after annealing in the range 850–900 °C. However, the W- and WSi-based contacts exhibit much smoother surface morphologies, even after 950 °C annealing. For example, the root-mean-square roughness of the Ti/Al/Pt/WSi/Ti/Au contact annealed at 950 °C was unchanged from the as-deposited values whereas the Ti/Al/Pt/Au contact shows significant deterioration of the morphology under these conditions. The improved thermal stability of the W- and WSix-based contacts is important for maintaining edge acuity during high-temperature operation.

[1]  M. V. Rao,et al.  Reliable Ti/Al and Ti/Al/Ni/Au ohmic contacts to n-type GaN formed by vacuum annealing , 2001 .

[2]  Lester F. Eastman,et al.  Ultra-low resistive ohmic contacts on n-GaN using Si implantation , 1997 .

[3]  Electric and Morphology Studies of Ohmic Contacts on AlGaN/GaN , 2000 .

[4]  Gerard J. Sullivan,et al.  Low resistance ohmic contacts on AlGaN/GaN structures using implantation and the “advancing” Al/Ti metallization , 1999 .

[5]  M. Shur,et al.  HALL MEASUREMENTS AND CONTACT RESISTANCE IN DOPED GAN/ALGAN HETEROSTRUCTURES , 1996 .

[6]  Theodore D. Moustakas,et al.  Metal contacts to gallium nitride , 1993 .

[7]  F. Ren,et al.  Thermal stability of W ohmic contacts to n‐type GaN , 1996 .

[8]  Michael J. Uren,et al.  Structural and electrical characterization of AuTiAlTi/AlGaN/GaN ohmic contacts , 2002 .

[9]  K. Doverspike,et al.  High-power microwave GaN/AlGaN HEMTs on semi-insulating silicon carbide substrates , 1999, IEEE Electron Device Letters.

[10]  E. Kuphal,et al.  Low resistance ohmic contacts to n- and p-InP , 1981 .

[11]  H. Morkoç,et al.  Very low resistance multilayer Ohmic contact to n‐GaN , 1996 .

[12]  G. K. Reeves,et al.  Obtaining the specific contact resistance from transmission line model measurements , 1982, IEEE Electron Device Letters.

[13]  Paul K. Chu,et al.  Microstructure of Ti/Al ohmic contacts for n-AlGaN , 1998 .

[14]  F. Ren,et al.  Materials Characterization of WSi Contacts to n+‐GaN as a Function of Rapid Thermal Annealing Temperatures , 1997 .

[15]  S. Lau,et al.  A review of the metal–GaN contact technology , 1998 .

[16]  Haipeng Tang,et al.  Microstructural analysis of Ti/Al/Ti/Au ohmic contacts to n-AlGaN/GaN , 2002 .

[17]  H. Morkoç,et al.  Low resistance ohmic contacts on wide band‐gap GaN , 1994 .

[18]  F. Ren,et al.  Improved Ni based composite Ohmic contact to n-SiC for high temperature and high power device applications , 2000 .

[19]  P. Searson,et al.  Fabrication of n-type 4H–SiC/Ni junctions using electrochemical deposition , 2000 .

[20]  Y. Koide,et al.  Effect of Pd or Pt addition to Ti/Al ohmic contact materials for n-type AlGaN , 2002 .

[21]  F. Ren,et al.  Contact resistivity and transport mechanisms in W contacts to p- and n-GaN , 2000 .

[22]  R. Vispute,et al.  Electrical, thermal, and microstructural characteristics of Ti/Al/Ti/Au multilayer Ohmic contacts to n-type GaN , 2003 .

[23]  S. Mohney,et al.  V/Al/Pt/Au Ohmic contact to n-AlGaN/GaN heterostructures , 2002 .

[24]  R. A. Davies,et al.  Correlation of contact resistance with microstructure for Au/Ni/Al/Ti/AlGaN/GaN ohmic contacts using transmission electron microscopy , 2001 .

[25]  Thomas N. Jackson,et al.  Investigation of the mechanism for Ohmic contact formation in Al and Ti/Al contacts to n-type GaN , 1997 .

[26]  Ilesanmi Adesida,et al.  Thermally-stable low-resistance Ti/Al/Mo/Au multilayer ohmic contacts on n–GaN , 2002 .

[27]  S. Mohammad,et al.  Temperature and doping-dependent resistivity of Ti/Au/Pd/Au multilayer ohmic contact to n-GaN , 2002 .

[28]  Z. Liliental-Weber,et al.  Microstructural evidence on electrical properties of Ta/Ti/Al and Ti/Ta/Al ohmic contacts to n-AlGaN/GaN , 2001 .

[29]  Y. Chen,et al.  An Al/sub 0.3/Ga/sub 0.7/N/GaN undoped channel heterostructure field effect transistor with F/sub max/ of 107 GHz , 1999, IEEE Electron Device Letters.