Deformation Mode and Microstructure on Stress Corrosion Cracking Path and Kinetics in High Temperature Water Environments

[1]  Y. Takeda,et al.  Characterization of microstructure and local deformation in 316NG weld heat-affected zone and stress corrosion cracking in high temperature water , 2011 .

[2]  Y. Qiu,et al.  The effect of roll-processing orientation on stress corrosion cracking of warm-rolled 304L stainless steel in oxygenated and deoxygenated high temperature pure water , 2010 .

[3]  G. Smith,et al.  Multi-scale characterization of stress corrosion cracking of cold-worked stainless steels and the influence of Cr content , 2009 .

[4]  Peter L. Andresen,et al.  IGSCC of non-sensitized stainless steels in high temperature water , 2008 .

[5]  Z. Jiao,et al.  Localized deformation and IASCC initiation in austenitic stainless steels , 2008 .

[6]  Y. Takeda,et al.  The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment , 2008 .

[7]  Y. Takeda,et al.  Transient and steady state crack growth kinetics for stress corrosion cracking of a cold worked 316L stainless steel in oxygenated pure water at different temperatures , 2008 .

[8]  Y. Takeda,et al.  Effects of Loading Mode and Temperature on Stress Corrosion Crack Growth Rates of a Cold-Worked Type 316L Stainless Steel in Oxygenated Pure Water , 2007 .

[9]  I. Thompson,et al.  On the relationship between grain boundary connectivity, coincident site lattice boundaries, and intergranular stress corrosion cracking , 2004 .

[10]  N. Lewis,et al.  The Stress Corrosion Crack Growth Rate of Alloy 600 Heat Affected Zones Exposed to High Purity Water , 2003 .

[11]  S. M. Bruemmer,et al.  Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys , 2001 .

[12]  G. Was,et al.  Combined effect of special grain boundaries and grain boundary carbides on IGSCC of Ni–16Cr–9Fe–xC alloys , 2001 .

[13]  G. S. Was,et al.  Role of Carbides in Stress Corrosion Cracking Resistance of Alloy 600 and Controlled-Purity Ni-16% Cr-9% Fe in Primary Water at 360°C , 1998 .

[14]  H. Sakamoto,et al.  Intergranular Stress Corrosion Crack Growth of Sensitized Type 304 Stainless Steel in a Simulated Boiling-Water Reactor Environment , 1997 .

[15]  G. Was,et al.  The Role of grain boundary misorientation in intergranular cracking of Ni-16Cr-9Fe in 360 °C argon and high-Purity water , 1992 .

[16]  Peter L. Andresen,et al.  Life prediction by mechanistic modeling and system monitoring of environmental cracking of iron and nickel alloys in aqueous systems , 1988 .

[17]  Y. Qiu,et al.  Effects of water chemistry and loading conditions on stress corrosion cracking of cold-rolled 316NG stainless steel in high temperature water , 2011 .

[18]  M. Kikuchi,et al.  SCC Growth Rates and Reference Curves for Low Carbon Stainless Steels in BWR Environment , 2004 .

[19]  P. Andresen,et al.  Effect of Martensite and Hydrogen on SCC of Stainless Steels and Alloy 600 , 2001 .