A modified phase-field model for cohesive interface failure in quasi-brittle solids

[1]  Yunteng Wang,et al.  Dynamic strain localization into a compaction band via a phase-field approach , 2023, Journal of the Mechanics and Physics of Solids.

[2]  J. Choo,et al.  Size effects on the strength and cracking behavior of flawed rocks under uniaxial compression: from laboratory scale to field scale , 2023, Acta Geotechnica.

[3]  W. Fan,et al.  Numerical analysis of fracture in interpenetrating phase composites based on crack phase field model , 2022, Composites Science and Technology.

[4]  R. Borja,et al.  A phase‐field approach for compaction band formation due to grain crushing , 2022, International Journal for Numerical and Analytical Methods in Geomechanics.

[5]  F. Daghia,et al.  Improving the crack propagation response of layered and bonded structures through dissipation mechanisms at different length scales , 2022, International Journal of Solids and Structures.

[6]  C. Xia,et al.  A new phase field model for mixed-mode brittle fractures in rocks modified from triple shear energy criterion , 2022, Acta Geotechnica.

[7]  F. P. Duda,et al.  Interaction analysis between a propagating crack and an interface: Phase field and cohesive surface models , 2022, International Journal of Plasticity.

[8]  X. Zhuang,et al.  A double-phase field model for multiple failures in composites , 2022, Composite Structures.

[9]  M. Paggi,et al.  A combined phase-field and cohesive zone model approach for crack propagation in layered structures made of nonlinear rubber-like materials , 2022, Computer Methods in Applied Mechanics and Engineering.

[10]  B. Nestler,et al.  Phase-field modeling of crack propagation in heterogeneous materials with multiple crack order parameters , 2022, Computer Methods in Applied Mechanics and Engineering.

[11]  Xiaofei Hu,et al.  On realizing specific failure initiation criteria in the phase field model , 2022, Computer Methods in Applied Mechanics and Engineering.

[12]  W. Ji,et al.  Measurement of Pure Mode I Fracture Toughness at a Sandwich Interface and Parametrization of the R-Curve for a Cohesive Element , 2022, Composite Structures.

[13]  N. Nguyen‐Thanh,et al.  Multi phase-field modeling of anisotropic crack propagation in 3D fiber-reinforced composites based on an adaptive isogeometric meshfree collocation method , 2022, Computer Methods in Applied Mechanics and Engineering.

[14]  Xiuhua Chen,et al.  Fracture phase field modeling of 3D stitched composite with optimized suture design , 2022, Computer Methods in Applied Mechanics and Engineering.

[15]  Wei Wu,et al.  A thermodynamically consistent phase field model for mixed-mode fracture in rock-like materials , 2022, Computer Methods in Applied Mechanics and Engineering.

[16]  M. Dias,et al.  On microscopic analysis of fracture in unidirectional composite material using phase field modelling , 2022, Composites Science and Technology.

[17]  Victor Manuel Calo,et al.  A spatio-temporal adaptive phase-field fracture method , 2021, Computer Methods in Applied Mechanics and Engineering.

[18]  Stefanie Reese,et al.  An anisotropic cohesive fracture model: advantages and limitations of length-scale insensitive phase-field damage models , 2021, Engineering Fracture Mechanics.

[19]  M. Paggi,et al.  Non-linear thermoelastic analysis of thin-walled structures with cohesive-like interfaces relying on the solid shell concept , 2022, Finite Elements in Analysis and Design.

[20]  O. Kolditz,et al.  Variational phase-field fracture modeling with interfaces , 2021 .

[21]  Tiantang Yu,et al.  Dynamic fracture analysis of the linearly uncoupled and coupled physical phenomena by the variable-node multiscale XFEM , 2021 .

[22]  J. Reddy,et al.  Interaction of anisotropic crack phase field with interface cohesive zone model for fiber reinforced composites , 2021 .

[23]  K. Liew,et al.  A framework for phase-field modeling of interfacial debonding and frictional slipping in heterogeneous composites , 2021 .

[24]  R. Borst,et al.  Phase-field modelling of cohesive fracture , 2021 .

[25]  Tinh Quoc Bui,et al.  A review of phase-field models, fundamentals and their applications to composite laminates , 2021 .

[26]  Weibang Lu,et al.  Enhancing the fracture toughness of laminated composites through carbon nanotube belt stitching , 2021 .

[27]  P. Blum,et al.  Simulating landslide-induced tsunamis in the Yangtze River at the Three Gorges in China , 2021, Acta Geotechnica.

[28]  S. Tinti,et al.  Large deformation dynamic analysis of progressive failure in layered clayey slopes under seismic loading using the particle finite element method , 2021, Acta Geotechnica.

[29]  Yunteng Wang,et al.  State-of-the-Art Review on the Progressive Failure Characteristics of Geomaterials in Peridynamic Theory , 2021 .

[30]  Chen Wang Transverse crack evolution modeling of cross-ply laminates with a single layer of phantom node intraply elements for identically-oriented ply groups , 2020 .

[31]  Vinh Phu Nguyen,et al.  A length scale insensitive anisotropic phase field fracture model for hyperelastic composites , 2020 .

[32]  K. Liew,et al.  Modeling microfracture evolution in heterogeneous composites: A coupled cohesive phase-field model , 2020 .

[33]  Somnath Ghosh,et al.  Finite deformation cohesive zone phase field model for crack propagation in multi-phase microstructures , 2020, Computational Mechanics.

[34]  Li-zhong Wang,et al.  Monotonic behavior of interface shear between carbonate sands and steel , 2020, Acta Geotechnica.

[35]  X. Zhuang,et al.  Phase field modeling of hydraulic fracture propagation in transversely isotropic poroelastic media , 2020, Acta Geotechnica.

[36]  Tinh Quoc Bui,et al.  Modelling distinct failure mechanisms in composite materials by a combined phase field method , 2020 .

[37]  Marco Paggi,et al.  A phase field approach enhanced with a cohesive zone model for modeling delamination induced by matrix cracking , 2020 .

[38]  Tinh Quoc Bui,et al.  Phase field modeling of fracture in fiber reinforced composite laminate , 2019, International Journal of Mechanical Sciences.

[39]  C. Baley,et al.  Interfacial properties of hemp fiber/epoxy system measured by microdroplet test: Effect of relative humidity , 2019, Composites Science and Technology.

[40]  J. Yvonnet,et al.  Phase field modeling of interfacial damage in heterogeneous media with stiff and soft interphases , 2019, Engineering Fracture Mechanics.

[41]  Vinh Phu Nguyen,et al.  Length scale and mesh bias sensitivity of phase-field models for brittle and cohesive fracture , 2019, Engineering Fracture Mechanics.

[42]  M. Paggi,et al.  A micromechanical analysis of inter-fiber failure in long reinforced composites based on the phase field approach of fracture combined with the cohesive zone model , 2019, International Journal of Fracture.

[43]  C. Annavarapu,et al.  A stabilized finite element method for enforcing stiff anisotropic cohesive laws using interface elements , 2019, Computer Methods in Applied Mechanics and Engineering.

[44]  Hu Chen,et al.  A two-set order parameters phase-field modeling of crack deflection/penetration in a heterogeneous microstructure , 2019, Computer Methods in Applied Mechanics and Engineering.

[45]  Blaise Bourdin,et al.  A variational phase-field model for hydraulic fracturing in porous media , 2019, Computer Methods in Applied Mechanics and Engineering.

[46]  Markus Kästner,et al.  Phase-field modelling of interface failure in brittle materials , 2019, Computer Methods in Applied Mechanics and Engineering.

[47]  Yunteng Wang,et al.  Three-dimensional numerical study on the failure characteristics of intermittent fissures under compressive-shear loads , 2018, Acta Geotechnica.

[48]  Vinh Phu Nguyen,et al.  Modeling dynamic fracture of solids with a phase-field regularized cohesive zone model , 2018, Computer Methods in Applied Mechanics and Engineering.

[49]  De-Cheng Feng,et al.  Phase-field regularized cohesive zone model (CZM) and size effect of concrete , 2018 .

[50]  Ying Hei Chui,et al.  An analytical solution for double cantilever beam based on elastic–plastic bilinear cohesive law: Analysis for mode I fracture of fibrous composites , 2018 .

[51]  R. Tao,et al.  Laser-based surface patterning of composite plates for improved secondary adhesive bonding , 2018, Composites Part A: Applied Science and Manufacturing.

[52]  Marco Paggi,et al.  Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field–cohesive zone model approach , 2018 .

[53]  Marco Paggi,et al.  A 3D finite strain model for intralayer and interlayer crack simulation coupling the phase field approach and cohesive zone model , 2017 .

[54]  Yunteng Wang,et al.  A 3-D conjugated bond-pair-based peridynamic formulation for initiation and propagation of cracks in brittle solids , 2017 .

[55]  Xiaoping Zhou,et al.  The modeling of crack propagation and coalescence in rocks under uniaxial compression using the novel conjugated bond-based peridynamics , 2017 .

[56]  W. Becker,et al.  Enhanced XFEM for crack deflection in multi-material joints , 2017, International Journal of Fracture.

[57]  Jian-Ying Wu,et al.  A unified phase-field theory for the mechanics of damage and quasi-brittle failure , 2017 .

[58]  Julien Réthoré,et al.  Multi-phase-field modeling of anisotropic crack propagation for polycrystalline materials , 2017 .

[59]  Toshio Nagashima,et al.  Numerical simulation of progressive damage and failure in composite laminates using XFEM/CZM coupled approach , 2017 .

[60]  Marco Paggi,et al.  Revisiting the problem of a crack impinging on an interface: A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model , 2017, 1702.01102.

[61]  Yujie Wei,et al.  Crack deflection in brittle media with heterogeneous interfaces and its application in shale fracking , 2017 .

[62]  M. Burghammer,et al.  Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening , 2017 .

[63]  C. Landis,et al.  Phase-field modeling of hydraulic fracture , 2016 .

[64]  Xiaoping Zhou,et al.  Numerical simulation of propagation and coalescence of flaws in rock materials under compressive loads using the extended non-ordinary state-based peridynamics , 2016 .

[65]  Ning Hu,et al.  XFEM simulation of delamination in composite laminates , 2016 .

[66]  Laura De Lorenzis,et al.  A phase-field model for ductile fracture at finite strains and its experimental verification , 2016 .

[67]  Julien Yvonnet,et al.  A phase-field method for computational modeling of interfacial damage interacting with crack propagation in realistic microstructures obtained by microtomography , 2016 .

[68]  Marco Paggi,et al.  An anisotropic large displacement cohesive zone model for fibrillar and crazing interfaces , 2015 .

[69]  René de Borst,et al.  A numerical assessment of phase-field models for brittle and cohesive fracture: Γ-Convergence and stress oscillations , 2015 .

[70]  L. Lorenzis,et al.  Phase-field modeling of ductile fracture , 2015, Computational Mechanics.

[71]  Ignacio Romero,et al.  A stable X‐FEM in cohesive transition from closed to open crack , 2015 .

[72]  Haim Waisman,et al.  Progressive delamination analysis of composite materials using XFEM and a discrete damage zone model , 2015 .

[73]  N. Parab,et al.  Crack Propagation Through Interfaces in a Borosilicate Glass and a Glass Ceramic , 2014 .

[74]  J. Reinoso,et al.  A consistent interface element formulation for geometrical and material nonlinearities , 2014, 1507.05168.

[75]  Cv Clemens Verhoosel,et al.  Phase-field models for brittle and cohesive fracture , 2014 .

[76]  Cv Clemens Verhoosel,et al.  A phase‐field model for cohesive fracture , 2013 .

[77]  Christian Miehe,et al.  A phase field model of dynamic fracture: Robust field updates for the analysis of complex crack patterns , 2013 .

[78]  Pietro Cornetti,et al.  Finite Fracture Mechanics at elastic interfaces , 2012 .

[79]  Eric Lorentz,et al.  Gradient damage models: Toward full-scale computations , 2011 .

[80]  Christian Miehe,et al.  A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits , 2010 .

[81]  Michael R Wisnom,et al.  Modelling discrete failures in composites with interface elements , 2010 .

[82]  Jean-Jacques Marigo,et al.  Regularized formulation of the variational brittle fracture with unilateral contact: Numerical experiments , 2009 .

[83]  T. Belytschko,et al.  A comparative study on finite element methods for dynamic fracture , 2008 .

[84]  J. Parmigiani,et al.  The roles of toughness and cohesive strength on crack deflection at interfaces , 2006 .

[85]  J. Dai,et al.  Interface bond between FRP sheets and concrete substrates: properties, numerical modeling and roles in member behaviour , 2005 .

[86]  Hyunho Shin,et al.  Reconsideration of crack deflection at planar interfaces in layered systems , 2004 .

[87]  B. Berkowitz Characterizing flow and transport in fractured geological media: A review , 2002 .

[88]  T. Belytschko,et al.  Extended finite element method for cohesive crack growth , 2002 .

[89]  D. Leguillon,et al.  A revisited criterion for crack deflection at an interface in a brittle bimaterial , 2001 .

[90]  B. Bourdin,et al.  Numerical experiments in revisited brittle fracture , 2000 .

[91]  S. Silling Reformulation of Elasticity Theory for Discontinuities and Long-Range Forces , 2000 .

[92]  T. Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[93]  Gilles A. Francfort,et al.  Revisiting brittle fracture as an energy minimization problem , 1998 .

[94]  Ignace Verpoest,et al.  A round-robin programme on interfacial test methods , 1993 .

[95]  M. Williams The stresses around a fault or crack in dissimilar media , 1959 .