Hydrodynamic focusing—a versatile tool

The control of hydrodynamic focusing in a microchannel has inspired new approaches for microfluidic mixing, separations, sensors, cell analysis, and microfabrication. Achieving a flat interface between the focusing and focused fluids is dependent on Reynolds number and device geometry, and many hydrodynamic focusing systems can benefit from this understanding. For applications where a specific cross-sectional shape is desired for the focused flow, advection generated by grooved structures in the channel walls can be used to define the shape of the focused flow. Relative flow rates of the focused flow and focusing streams can be manipulated to control the cross-sectional area of the focused flows. This paper discusses the principles for defining the shape of the interface between the focused and focusing fluids and provides examples from our lab that use hydrodynamic focusing for impedance-based sensors, flow cytometry, and microfabrication to illustrate the breadth of opportunities for introducing new capabilities into microfluidic systems. We evaluate each example for the advantages and limitations integral to utilization of hydrodynamic focusing for that particular application.

[1]  F. Ligler,et al.  Hydrodynamic and electrical considerations in the design of a four-electrode impedance-based microfluidic device , 2011, Analytical and bioanalytical chemistry.

[2]  Peter B Howell,et al.  Toolbox for the design of optimized microfluidic components. , 2006, Lab on a chip.

[3]  Jeffrey S Erickson,et al.  Microflow Cytometer for optical analysis of phytoplankton. , 2011, Biosensors & bioelectronics.

[4]  Gwo-Bin Lee,et al.  The hydrodynamic focusing effect inside rectangular microchannels , 2006 .

[5]  C. Ohm,et al.  A Continuous Flow Synthesis of Micrometer‐Sized Actuators from Liquid Crystalline Elastomers , 2009, Advanced materials.

[6]  I. Mezić,et al.  Chaotic Mixer for Microchannels , 2002, Science.

[7]  J. An,et al.  Amphiphilic triblock copolymer and a microfluidic device for porous microfiber fabrication , 2010 .

[8]  Peter Kauffman,et al.  Microfluidics without pumps: reinventing the T-sensor and H-filter in paper networks. , 2010, Lab on a chip.

[9]  Lisa R. Hilliard,et al.  Multi-wavelength microflow cytometer using groove-generated sheath flow. , 2009, Lab on a chip.

[10]  Jeffrey S Erickson,et al.  Dynamic reversibility of hydrodynamic focusing for recycling sheath fluid. , 2010, Lab on a chip.

[11]  S. Shoji.  Micro Total Analysis Systems , 1999 .

[12]  John A. Rogers,et al.  Micro Total Analysis System , 2008 .

[13]  Martin Arundell,et al.  High-speed particle detection in a micro-Coulter counter with two-dimensional adjustable aperture. , 2008, Biosensors & bioelectronics.

[14]  Jeffrey S Erickson,et al.  Optofluidic characterization of marine algae using a microflow cytometer. , 2011, Biomicrofluidics.

[15]  Pasqualina M. Sarro,et al.  Integrated Coulter counter based on 2-dimensional liquid aperture control , 2004 .

[16]  F. Ligler,et al.  Multiplexed detection of bacteria and toxins using a microflow cytometer. , 2009, Analytical chemistry.

[17]  D. Beebe,et al.  Controlled microfluidic interfaces , 2005, Nature.

[18]  Unyong Jeong,et al.  Core‐Sheath Nanofibers Containing Colloidal Arrays in the Core for Programmable Multi‐Agent Delivery , 2009 .

[19]  Xiaohong Fang,et al.  A hydrodynamically focused stream as a dynamic template for site-specific electrochemical micropatterning of conducting polymers. , 2008, Angewandte Chemie.

[20]  Frances S. Ligler,et al.  The Microflow Cytometer , 2010 .

[21]  G. Whitesides,et al.  Microfabrication inside capillaries using multiphase laminar flow patterning , 1999, Science.

[22]  Abel L. Thangawng,et al.  UV polymerization of hydrodynamically shaped fibers. , 2011, Lab on a chip.

[23]  F. Ligler,et al.  Parameters affecting the shape of a hydrodynamically focused stream , 2011 .

[24]  Jeffrey S Erickson,et al.  The good, the bad, and the tiny: a review of microflow cytometry , 2008, Analytical and bioanalytical chemistry.

[25]  Jeffrey S Erickson,et al.  A simple sheath-flow microfluidic device for micro/nanomanufacturing: fabrication of hydrodynamically shaped polymer fibers. , 2009, Lab on a chip.

[26]  Ruey-Jen Yang,et al.  Three-dimensional hydrodynamic focusing in two-layer polydimethylsiloxane (PDMS) microchannels , 2007 .

[27]  Hywel Morgan,et al.  Micro-impedance cytometry for detection and analysis of micron-sized particles and bacteria. , 2011, Lab on a chip.

[28]  D. Tyler McQuade,et al.  Polymer chemistry in flow: New polymers, beads, capsules, and fibers , 2006 .

[29]  Lisa C Shriver-Lake,et al.  Effect of diffusion on impedance measurements in a hydrodynamic flow focusing sensor. , 2010, Lab on a chip.

[30]  Peter B Howell,et al.  A microfluidic mixer with grooves placed on the top and bottom of the channel. , 2005, Lab on a chip.

[31]  Alan G. R. Evans,et al.  Microfluidic Technology and Applications , 2007 .

[32]  U. Larsen,et al.  Modular concept of a laboratory on a chip for chemical and biochemical analysis , 1998 .

[33]  Su-Jung Shin,et al.  Novel PDMS cylindrical channels that generate coaxial flow, and application to fabrication of microfibers and particles. , 2010, Lab on a chip.

[34]  S. Gawad,et al.  Micromachined impedance spectroscopy flow cytometer for cell analysis and particle sizing. , 2001, Lab on a chip.

[35]  P. Yager,et al.  Microfluidic Diffusion-Based Separation and Detection , 1999, Science.

[36]  Joel P Golden,et al.  A hard microflow cytometer using groove-generated sheath flow for multiplexed bead and cell assays , 2010, Analytical and bioanalytical chemistry.

[37]  Peter B Howell,et al.  Design and evaluation of a Dean vortex-based micromixer. , 2004, Lab on a chip.

[38]  Mansoor Nasir,et al.  Hydrodynamic focusing of conducting fluids for conductivity-based biosensors. , 2010, Biosensors & bioelectronics.

[39]  E. Walsh,et al.  On the out-of-plane divergence of streamtubes in planar mini-scale flow focusing devices , 2007 .

[40]  David J Beebe,et al.  Hydrodynamic microfabrication via"on the fly" photopolymerization of microscale fibers and tubes. , 2004, Lab on a chip.

[41]  Frances S. Ligler,et al.  A combinatorial approach to microfluidic mixing , 2008 .

[42]  Yangcheng Lu,et al.  Controllable preparation of microscale tubes with multiphase co-laminar flow in a double co-axial microdevice. , 2009, Lab on a chip.

[43]  Jeffrey S Erickson,et al.  Two simple and rugged designs for creating microfluidic sheath flow. , 2008, Lab on a chip.