Research on Prediction Method of Performance Degradation of Flexible Optoelectronic Film Material Processing Equipment Based on Adaptive Fuzzy Clustering

Flexible photoelectric film is an anisotropic material. The slight change of equipment performance during processing is prone to cause deformation of the material. Therefore, it is important to predict the degradation of processing equipment performance. Since the performance degradation of flexible photoelectric film material Roll-to-Roll (R2R) processing equipment is a nonlinear process, this paper introduces an adaptive fuzzy clustering method to construct a fuzzy membership function model for calculating the performance degradation index of R2R processing equipment and studies the parameter solving method such as the AFCM division of the roller vibration data, the category center value of the fuzzy membership function, and the input data division area width. Finally, the performance degradation index calculation algorithm is designed. The roller shaft accelerated life test was carried out using self-made equipment. The test data were 1000 sets. The results showed that the root mean square eigenvalues and the kurtosis eigenvalues of the roller vibration data are sensitive to the performance degradation. The equipment performance curve described by the first and second types of performance degradation indicators was very stable in the early stage. After the group, the curve continued to decrease, and the change was more severe, indicating that the performance degradation of the equipment is more serious. In the group, the longer-lasting roller shaft was damaged, and the performance index value was about zero, which proved the correctness of the performance degradation prediction method proposed in this paper in calculating the performance degradation value of the equipment.