A Review of Fully Integrated and Embedded Power Converters for IoT

The Internet of Things (IoT) has found application in many components of implantable medical devices, wearable smart devices, monitoring systems, etc. The IoT devices are conventionally battery powered, even though, in several low power applications, they can also be powered using energy harvesting technology. Independently of the power sources (if batteries or environment), efficient and robust power converters must be designed to provide the small and distributed energy required by such IoT devices. This review paper will first provide an overview about the power consumption in IoT devices; second, it will discuss the most recent research and advance in the field of fully-integrated or embedded DC/DC converters, starting from high-performance integrated charge pumps or embedded inductive boost converters for specific harvesting sources (temperature, solar, and so on), to novel DC/DC converters for multiple energy sources.

[1]  Michael D. Seeman,et al.  Analysis and Optimization of Switched-Capacitor DC–DC Converters , 2008 .

[2]  KUOR-HSIN CHANG,et al.  Bluetooth: a viable solution for IoT? [Industry Perspectives] , 2014, IEEE Wireless Communications.

[3]  Ping Luo,et al.  Review of Solar Energy Harvesting for IoT Applications , 2018, 2018 IEEE Asia Pacific Conference on Circuits and Systems (APCCAS).

[4]  Gaetano Palumbo,et al.  A Review of Charge Pump Topologies for the Power Management of IoT Nodes , 2019, Electronics.

[5]  Anna Richelli,et al.  A DC/DC Boosting Technique and Power Management for Ultralow-Voltage Energy Harvesting Applications , 2012, IEEE Transactions on Industrial Electronics.

[6]  Joan Daniel Prades,et al.  The Power of Models: Modeling Power Consumption for IoT Devices , 2015, IEEE Sensors Journal.

[7]  Luigi Colalongo,et al.  Ultra-Low Voltage Push-Pull Converter for Micro Energy Harvesting , 2020, IEEE Transactions on Circuits and Systems II: Express Briefs.

[8]  Luigi Colalongo,et al.  A 30 mV-2.5 V DC/DC Converter for Energy Harvesting , 2015, J. Low Power Electron..

[9]  Koichi Ishida,et al.  Startup Techniques for 95 mV Step-Up Converter by Capacitor Pass-On Scheme and ${\rm V}_{\rm TH}$-Tuned Oscillator With Fixed Charge Programming , 2012, IEEE Journal of Solid-State Circuits.

[10]  L. Colalongo,et al.  A new lumped model for on-chip inductors including substrate currents , 2003, Proceedings of the 12th IEEE International Conference on Fuzzy Systems (Cat. No.03CH37442).

[11]  L. Colalongo,et al.  A fully integrated inductor-based 1.8-6-V step-up converter , 2004, IEEE Journal of Solid-State Circuits.

[12]  Fernando Lessa Tofoli,et al.  Switched Capacitor DC-DC Converters: A Survey on the Main Topologies, Design Characteristics, and Applications , 2021, Energies.

[13]  Ayas Kanta Swain,et al.  Ultra-Low Power Solar Energy Harvester for IoT Edge Node Devices , 2019, 2019 IEEE International Symposium on Smart Electronic Systems (iSES) (Formerly iNiS).

[14]  Kai Strunz,et al.  A 20 mV Input Boost Converter With Efficient Digital Control for Thermoelectric Energy Harvesting , 2010, IEEE Journal of Solid-State Circuits.

[15]  J. F. Dickson,et al.  On-chip high-voltage generation in MNOS integrated circuits using an improved voltage multiplier technique , 1976 .

[16]  Luigi Colalongo,et al.  Dickson charge pump using integrated inductors in complementary metal–oxide semiconductor technology , 2016 .

[17]  T. Tanzawa,et al.  Design of a Charge Pump Circuit and System with Input Impedance Modulation for a Flexible-Type Thermoelectric Generator with High-Output Impedance , 2021, Electronics.

[18]  Mickaël Lallart,et al.  Small-Scale Energy Harvesting , 2012 .

[19]  M. Zhang,et al.  A High Conversion Ratio Component-Efficient Charge Pump for Display Drivers , 2016, Journal of Display Technology.

[20]  Ying Zhang,et al.  A Practical Supercapacitor Model for Power Management in Wireless Sensor Nodes , 2015, IEEE Transactions on Power Electronics.

[21]  Anantha P. Chandrakasan,et al.  A 28 nm FDSOI Integrated Reconfigurable Switched-Capacitor Based Step-Up DC-DC Converter With 88% Peak Efficiency , 2015, IEEE Journal of Solid-State Circuits.

[22]  J. M. Damaschke.  Design of a low-input-voltage converter for thermoelectric generator , 1997 .

[23]  Marco Ronchi,et al.  Power Management Circuits for Low-Power RF Energy Harvesters , 2020, Journal of Low Power Electronics and Applications.

[24]  Y. Wen,et al.  A Low-Frequency Resonant Electromagnetic Vibration Energy Harvester Employing the Halbach Arrays for Intelligent Wireless Sensor Networks , 2015, IEEE Transactions on Magnetics.

[25]  Dong In Kim,et al.  A Survey on RF Energy Harvesting System with High Efficiency RF-DC Converters , 2020 .

[26]  Hoi Lee,et al.  Gain-Enhanced Monolithic Charge Pump With Simultaneous Dynamic Gate and Substrate Control , 2013, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[27]  Luigi Colalongo,et al.  Charge Pump Architectures Based on Dynamic Gate Control of the Pass-Transistors , 2009, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[28]  Youngoo Yang,et al.  A 2.45 GHz High Efficiency CMOS RF Energy Harvester with Adaptive Path Control , 2020 .

[29]  Michel Declercq,et al.  A high-efficiency CMOS voltage doubler , 1998, IEEE J. Solid State Circuits.

[30]  S. Boisseau,et al.  Electrostatic Conversion for Vibration Energy Harvesting , 2012, 1210.5191.

[31]  Labonnah F. Rahman,et al.  Design Topologies of a CMOS Charge Pump Circuit for Low Power Applications , 2021, Electronics.

[32]  M. Pasotti,et al.  Power efficient charge pump in deep submicron standard CMOS technology , 2003, Proceedings of the 27th European Solid-State Circuits Conference.

[33]  Loreto Mateu,et al.  Mini Wind Harvester and a Low Power Three-Phase AC/DC Converter to Power IoT Devices: Analysis, Simulation, Test and Design , 2020, Applied Sciences.

[34]  Behnam Zakeri,et al.  Internet of Things (IoT) and the Energy Sector , 2020, Energies.

[35]  Edgar Sanchez-Sinencio,et al.  Multiple Input Energy Harvesting Systems for Autonomous IoT End-Nodes , 2018 .

[36]  Lutfi Albasha,et al.  High Efficiency Energy Harvesters in 65nm CMOS Process for Autonomous IoT Sensor Applications , 2018, IEEE Access.

[37]  Luigi Colalongo,et al.  Non-isolated multiple-input boost converter for energy harvesting , 2017 .

[38]  Chenhao Nan,et al.  Switched Tank Converters , 2019, IEEE Transactions on Power Electronics.

[39]  Chun-Huat Heng,et al.  A Sub-10 mV Power Converter With Fully Integrated Self-Start, MPPT, and ZCS Control for Thermoelectric Energy Harvesting , 2018, IEEE Transactions on Circuits and Systems I: Regular Papers.

[40]  L. Colalongo,et al.  A 0.2$-\hbox{1.2}$ V DC/DC Boost Converter for Power Harvesting Applications , 2009, IEEE Transactions on Power Electronics.

[41]  Anantha Chandrakasan,et al.  A Battery-Less Thermoelectric Energy Harvesting Interface Circuit With 35 mV Startup Voltage , 2010, IEEE Journal of Solid-State Circuits.

[43]  M. Hussain,et al.  Free-Form Flexible Lithium-Ion Microbattery , 2016, IEEE Transactions on Nanotechnology.

[44]  Cyril Condemine,et al.  Efficient Power Management Circuit: From Thermal Energy Harvesting to Above-IC Microbattery Energy Storage , 2008, IEEE J. Solid State Circuits.

[45]  V. Ferrari,et al.  Thermal energy harvesting through pyroelectricity , 2010 .

[46]  R. Jegatheesan,et al.  Design of Novel Dual Input DC–DC Converter for Energy Harvesting System in IoT Sensor Nodes , 2020 .

[47]  Yu-Te Liao,et al.  An Optically-Powered 432 MHz Wireless Tag for Batteryless Internet-of-Things Applications , 2019, IEEE Transactions on Circuits and Systems I: Regular Papers.

[48]  Anne-Cécile Orgerie,et al.  Estimating the End-to-End Energy Consumption of Low-Bandwidth IoT Applications for WiFi Devices , 2019, 2019 IEEE International Conference on Cloud Computing Technology and Science (CloudCom).

[49]  Gaetano Palumbo,et al.  A Subthreshold Cross-Coupled Hybrid Charge Pump for 50-mV Cold-Start , 2020, IEEE Access.

[50]  Toru Tanzawa,et al.  A Design of Cold Start Charge Pump for Flexible Thermoelectric Generator with High Output Impedance , 2020, 2020 27th IEEE International Conference on Electronics, Circuits and Systems (ICECS).