Validation of a mathematical model for encapsulated phase change material flat slabs for cooling applications

Abstract A one-dimensional liquid-based model for a flat slab phase change thermal storage unit was developed. The model allows for varying wall temperatures along the direction of flow and integrates a convective boundary layer using a previously developed algorithm, which is employed to iteratively calculate the liquid fraction and the temperature of each phase change material (PCM) node. The melting and freezing processes are analysed based on the temperatures of the heat transfer fluid nodes, the wall nodes and the PCM nodes during melting and freezing. The mathematical model developed was validated using two sets of experimental data obtained from tests using a PCM having a melting point of −26.7 °C and a liquid glycol based heat transfer fluid. The numerical results show a good agreement with the experimental ones.

[1]  E. Ghanbari,et al.  Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard , 1991 .

[2]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[3]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[4]  Takuji Nakamura,et al.  Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage—Heat response in small scale experiments , 2006 .

[5]  Mohammed M. Farid,et al.  Underfloor heating with latent heat storage , 2001 .

[6]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[7]  Kamal Abdel Radi Ismail,et al.  A numerical and experimental study on a parallel plate ice bank , 1999 .

[8]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[9]  Sunil Kumar Singal,et al.  Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .

[10]  D. Morrison,et al.  Effects of phase-change energy storage on the performance of air-based and liquid-based solar heating systems , 1977 .

[11]  L. Cabeza,et al.  Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .

[12]  Göran Hed,et al.  Mathematical modelling of PCM air heat exchanger , 2006 .

[13]  K. Peippo,et al.  A multicomponent PCM wall optimized for passive solar heating , 1991 .

[14]  Zhu Neng,et al.  Experimental study and evaluation of latent heat storage in phase change materials wallboards , 2007 .

[15]  H. S. Carslow,et al.  Conduction of Heat in Solids, Second Edition , 1986 .

[16]  D. Feldman,et al.  Full scale thermal testing of latent heat storage in wallboard , 1996 .

[17]  Wasim Saman,et al.  A phase change processor method for solving a one-dimensional phase change problem with convection boundary , 2010 .

[18]  Wasim Saman,et al.  Numerical analysis of a PCM thermal storage system with varying wall temperature , 2005 .

[19]  Wasim Saman,et al.  Thermal performance of PCM thermal storage unit for a roof integrated solar heating system , 2005 .

[20]  A. Bejan,et al.  Thermal Energy Storage: Systems and Applications , 2002 .

[21]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[22]  Xin Wang,et al.  Numerical analysis of effect of shape-stabilized phase change material plates in a building combined with night ventilation , 2009 .

[23]  Soma Das,et al.  Mathematical modeling and experimental studies on solar energy storage in a phase change material , 1993 .

[24]  Marcel Lacroix,et al.  Study of the thermal behavior of a latent heat cold storage unit operating under frosting conditions , 2003 .

[25]  K. Kaygusuz.  Phase Change Energy Storage for Solar Heating Systems , 2003 .

[26]  Xu Xu,et al.  Experimental study of under-floor electric heating system with shape-stabilized PCM plates , 2005 .

[27]  K. Nagano,et al.  Development of a ventilation system utilizing thermal energy storage for granules containing phase change material , 2004 .

[28]  Wasim Saman,et al.  Analysis and modelling of a phase change storage system for air conditioning applications , 2001 .

[29]  Martin Helm,et al.  Long-Term Test Results from a Latent Heat Storage Developed for a Solar Heating and Cooling System , 2010 .