Use of polypropylene fibers extracted from recycled surgical face masks in cement mortar

[1]  S. Keawsawasvong,et al.  Effect of superabsorbent polymer and polypropylene fiber on mechanical performances of alkali-activated high-calcium fly ash mortar under ambient and elevated temperatures , 2023, Journal of Building Engineering.

[2]  S. Likitlersuang,et al.  Compressive Behavior and Durability Performance of High-Volume Fly-Ash Concrete with Plastic Waste and Graphene Nanoplatelets by Using Response-Surface Methodology , 2022, Journal of Materials in Civil Engineering.

[3]  S. Ghadr,et al.  Mechanical behavior of sands reinforced with shredded face masks , 2022, Bulletin of Engineering Geology and the Environment.

[4]  Mahmood Hunar Dheyaaldin,et al.  Performance of Fiber-Reinforced Alkali-Activated Mortar with/without Nano Silica and Nano Alumina , 2022, Sustainability.

[5]  S. Likitlersuang,et al.  Mechanical performance and optimization of high-volume fly ash concrete containing plastic wastes and graphene nanoplatelets using response surface methodology , 2021, Construction and Building Materials.

[6]  T. Charinpanitkul,et al.  Hybrid effect of carbon nanotubes and polypropylene fibers on mechanical properties and fire resistance of cement mortar , 2021 .

[7]  M. Saberian,et al.  Preliminary evaluation of the feasibility of using polypropylene fibres from COVID-19 single-use face masks to improve the mechanical properties of concrete , 2021, Journal of Cleaner Production.

[8]  M. Saberian,et al.  Repurposing of COVID-19 single-use face masks for pavements base/subbase , 2021, Science of The Total Environment.

[9]  A. Tafuro,et al.  Sustainable Mortars for Application in the Cultural Heritage Field , 2021, Materials.

[10]  S. Likitlersuang,et al.  Effect of hybrid polypropylene-steel fibres on strength characteristics of UHPFRC , 2020 .

[11]  Oluniyi O. Fadare,et al.  Covid-19 face masks: A potential source of microplastic fibers in the environment , 2020, Science of The Total Environment.

[12]  P. Jongvivatsakul,et al.  Mechanical and Thermal Neutron Attenuation Properties of Concrete Reinforced with Low-Dose Gamma Irradiated PETE Fibers and Sodium Borate , 2020 .

[13]  M. Kazemi,et al.  In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test , 2020 .

[14]  M. Gholhaki,et al.  An experimental investigation into effect of temperature rise on mechanical and visual characteristics of concrete containing recycled metal spring , 2020, Structural Concrete.

[15]  Qiang Li,et al.  The tensile and swelling behavior of cement-stabilized marine clay reinforced with short waste fibers , 2019, Marine Georesources & Geotechnology.

[16]  Yuntao Zhu,et al.  The Influence of Nano-SiO2 and Recycled Polypropylene Plastic Content on Physical, Mechanical, and Shrinkage Properties of Mortar , 2019, Advances in Civil Engineering.

[17]  P. Jongvivatsakul,et al.  Using Steel Fiber-Reinforced Concrete Precast Panels for Strengthening in Shear of Beams: An Experimental and Analytical Investigation , 2019, Advances in Civil Engineering.

[18]  A. Hasan,et al.  Effects of Polypropylene Fiber Content on Strength and Workability Properties of Concrete , 2019, Polytechnic Journal.

[19]  M. Gholhaki,et al.  An Experimental Study on the Effects of Adding Steel and Polypropylene Fibers to Concrete on Its Resistance after Different Temperatures , 2019 .

[20]  Y. Ju,et al.  Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber , 2019, Construction and Building Materials.

[21]  M. Gholhaki,et al.  Performance of concrete containing recycled springs in post-fire conditions , 2018 .

[22]  Zahid Hussain Khaskheli,et al.  Influence of Fibre Length on the Behaviour of Polypropylene Fibre Reinforced Cement Concrete , 2018, Civil Engineering Journal.

[23]  L. G. Li,et al.  Combined effects of water film thickness and polypropylene fibre length on fresh properties of mortar , 2018, Construction and Building Materials.

[24]  R. D. T. Filho,et al.  A review on the chemical, mechanical and microstructural characterization of carbon nanotubes-cement based composites , 2017 .

[25]  E. Fehling,et al.  Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete , 2017 .

[26]  M. G. Alberti,et al.  Fibre reinforced concrete with a combination of polyolefin and steel-hooked fibres , 2017 .

[27]  G. M. Sadiqul Islam,et al.  Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete , 2016 .

[28]  M. Mehrali,et al.  A Comprehensive Study of the Polypropylene Fiber Reinforced Fly Ash Based Geopolymer , 2016, PloS one.

[29]  Luís Bragança,et al.  Comparative environmental life-cycle analysis of concretes using biomass and coal fly ashes as partial cement replacement material , 2016 .

[30]  Togay Ozbakkaloglu,et al.  Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers , 2015 .

[31]  Young Soo Yoon,et al.  Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC , 2014 .

[32]  Mehmet Gesoğlu,et al.  Investigating properties of pervious concretes containing waste tire rubbers , 2014 .

[33]  Esraa Emam Ali,et al.  Recycled glass as a partial replacement for fine aggregate in self compacting concrete , 2012 .

[34]  Cengiz Duran Atiş,et al.  The durability properties of polypropylene fiber reinforced fly ash concrete , 2011 .

[35]  Bing Chen,et al.  Contribution Of Hybrid Fibers On The Properties Of The High-Strength Lightweight Concrete Having Good Workability , 2005 .

[36]  P. Chindaprasirt,et al.  Enhancement of mechanical properties of fly ash geopolymer containing fine recycled concrete aggregate with micro carbon fiber , 2021 .

[37]  G. Tanapornraweekit,et al.  Mechanical properties of aramid fiber-reinforced composites and performance on repairing concrete beams damaged by corrosion , 2020 .

[38]  K. Shahzada,et al.  Mechanical properties of polypropylene fibers mixed cement-sand mortar , 2019, Journal of Applied Engineering Science.

[39]  M. Gholhaki,et al.  An experimental study on mechanical properties of concrete containing steel and polypropylene fibers at high temperatures , 2017 .

[40]  Haeng-Ki Lee,et al.  Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume , 2014 .

[41]  S. Ahzi,et al.  Recycling effects on the rheological and thermomechanical properties of polypropylene-based composites , 2012 .

[42]  Test Method for Density, Absorption, and Voids in Hardened Concrete , 2022 .