Ultra-Compact Power Conversion Based on a CMOS-Compatible Microfabricated Power Inductor with Minimized Core Losses

A CMOS-compatible microfabricated inductor is presented. The inductor consists of a planar spiral coil optionally sandwiched between upper and lower magnetic core layers. Core materials investigated include ferrite-filled polymer and electrodeposited nickel-iron permalloy (Ni0.80Fe0.20).Four core constructions were investigated: air-core (i.e., no magnetic material); lower permalloy core with upper air core; lower permalloy core with upper ferrite polymer core; and lower and upper permalloy core. In all cases with magnetic cores, a nominal magnetic air gap of 2 microns was utilized. As expected, the all-permalloy construction yielded the highest inductance. Inductors were characterized both by impedance analysis as well as in a prototype buck DC-DC conversion circuit. When the converter was operated at 5 MHz, peak efficiency of 82% and an efficiency of 80% at a load current of 2.5 A and output voltage of 2 V was obtained.

[1]  Hiroshi Tomita,et al.  A magnetic thin film inductor and its application to a MHz switching dc-dc converter , 1994 .

[2]  Mark G. Allen,et al.  A comparison of two micromachined inductors (bar-type and meander-type) for fully integrated boost DC/DC power converters , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[3]  Hyoung-june Kim,et al.  Fabrication of high frequency DC-DC converter using Ti/FeTaN film inductor , 2001 .

[4]  S. Narendra,et al.  A 233-MHz 80%-87% efficient four-phase DC-DC converter utilizing air-core inductors on package , 2005, IEEE Journal of Solid-State Circuits.

[5]  Peter Hazucha,et al.  High-frequency DC-DC conversion : fact or fiction , 2006, 2006 IEEE International Symposium on Circuits and Systems.

[6]  S.C.O. Mathuna,et al.  Magnetics on silicon: an enabling technology for power supply on chip , 2005, IEEE Transactions on Power Electronics.

[7]  E. Brandon,et al.  Fabrication and characterization of microinductors for distributed power converters , 2003 .

[8]  T. O'Donnell,et al.  Microfabricated coupled inductors for DC-DC converters for microprocessor power delivery , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[9]  Martin A. M. Gijs,et al.  Hybrid MEMS inductor for miniaturized autonomous power converter , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[10]  F. Cros,et al.  Planar spiral inductors with multilayer micrometer-scale laminated cores for compact-packaging power converter applications , 2004, IEEE Transactions on Magnetics.