Microscopic morphology, rheological behavior, and mechanical properties of polymers: Recycled acrylonitrile‐butadiene‐styrene/polybutylene terephthalate blends

[1]  Y. Duh,et al.  Study on Exothermic Oxidation of Acrylonitrile-butadiene-styrene (ABS) Resin Powder with Application to ABS Processing Safety , 2010 .

[2]  Ryan B. Wicker,et al.  Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing , 2014 .

[3]  W. Perkins.  Polymer toughness and impact resistance , 1999 .

[4]  T. Alfrey,et al.  The Mechanism of Copolymerization , 1944 .

[5]  T. Alfrey,et al.  The Copolymerization of Styrene and Maleic Anhydride , 1945 .

[6]  Yong Li,et al.  Measurements of the mechanical response of unidirectional 3D-printed PLA , 2017 .

[7]  Anita J. Hill,et al.  Thermal degradation of acrylonitrile–butadiene–styrene (ABS) blends , 2002 .

[8]  Lixin Wu,et al.  Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing , 2016 .

[9]  F. Polato.  Toughened polybutyleneterephthalate compounds , 1985 .

[10]  Joshua M. Pearce,et al.  Polymer recycling codes for distributed manufacturing with 3-D printers , 2015 .

[11]  S. Karlsson,et al.  Quality Concepts for the Improved Use of Recycled Polymeric Materials: A Review , 2008 .

[12]  Lung-chang Liu,et al.  Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications , 2016 .

[13]  Julio M. Ottino,et al.  Stretching and breakup of droplets in chaotic flows , 1991, Journal of Fluid Mechanics.

[14]  D. R. Paul,et al.  Impact modification of poly(butylene terephthalate) by ABS materials , 1997 .

[15]  S. Ray,et al.  Toughening of biodegradable polylactide/poly(butylene succinate-co-adipate) blends via in situ reactive compatibilization. , 2013, ACS applied materials & interfaces.

[16]  J. Nazábal,et al.  Compatibilization of a poly(butylene terephthalate)/poly(ethylene octene) copolymer blends with different amounts of an epoxy resin , 2004 .

[17]  V. Kodolov,et al.  Parameters of the Alfrey-Price and taft equations☆ , 1976 .

[18]  Ku-Feng Yang,et al.  Effects of viscosity ratio and compatibilizers on the morphology and mechanical properties of polycarbonate/acrylonitrile-butadiene-styrene blends , 1999 .

[19]  Christopher W. Macosko,et al.  Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization , 1995 .

[20]  Geoffrey Ingram Taylor,et al.  The formation of emulsions in definable fields of flow , 1934 .

[21]  Mingyao Zhang,et al.  Effects of polybutadiene-g-SAN impact modifiers on the morphology and mechanical behaviors of ABS blends , 2005 .

[22]  W. E. Baker,et al.  The separate roles of phase structure and interfacial adhesion in toughening a brittle polymer , 1992 .

[23]  C. L. Tucker,et al.  Microstructural evolution in polymer blends , 2003 .

[24]  C. Scott,et al.  Effect of viscosity ratio on structure evolution in miscible polymer blends , 2001 .

[25]  Yihu Song,et al.  Application of two phase model to linear viscoelasticity of reinforced rubbers , 2011 .

[26]  Chao-Ming Huang,et al.  Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material , 2017, Journal of Polymers and the Environment.

[27]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[28]  G. Groeninckx,et al.  Phase morphology development in immiscible PP/(PS/PPE) blends influence of the melt-viscosity ratio and blend composition , 1999 .

[29]  F. Chang,et al.  compatibilization of PBT/ABS blends through reactive copolymers , 1994 .

[30]  Kotiba Hamad,et al.  Recycling of waste from polymer materials: An overview of the recent works , 2013 .

[31]  Nicole E. Zander,et al.  Recycled polypropylene blends as novel 3D printing materials , 2019, Additive Manufacturing.

[32]  K. Hart,et al.  Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing , 2018 .

[33]  G. L. Mantovani,et al.  Toughening of PBT by ABS, SBS and HIPS systems and the effects of reactive functionalised copolymers , 2001 .

[34]  Heh Han Meijer,et al.  Droplet breakup mechanisms : stepwise equilibrium versus transient dispersion , 1993 .

[35]  M. Kodal,et al.  The mechanical, thermal and morphological properties of γ-irradiated PLA/TAIC and PLA/OvPOSS , 2018, Radiation Physics and Chemistry.

[36]  M. Zhang,et al.  Toughness of ABS/PBT blends: The relationship between composition, morphology, and fracture behavior , 2018 .

[37]  Nicole E. Zander,et al.  Recycled polyethylene terephthalate as a new FFF feedstock material , 2018 .

[38]  Agnès Rivaton,et al.  Photo-oxidation of ABS at long wavelengths (λ > 300 nm) , 1997 .

[39]  G. L. Mantovani,et al.  The influence of viscosity and composition of ABS on the ABS/SBS blend morphology and properties , 2018, Journal of Applied Polymer Science.

[40]  J. Shimada,et al.  The mechanism of oxidative degradation of ABS resin. Part I. The mechanism of thermooxidative degradation , 1968 .

[41]  J. B. Adeniyi.  Clarification and discussion of chemical transformations involved in thermal and photo-oxidative degradation of ABS , 1984 .

[42]  N. Grizzuti,et al.  Effects of coalescence and breakup on the steady-state morphology of an immiscible polymer blend in shear flow , 1997 .

[43]  T. Alfrey,et al.  Copolymerization of Systems of Three and More Components , 1944 .

[44]  A. V. Machado,et al.  Artificial and natural weathering of ABS , 2010 .

[45]  Yihu Song,et al.  Relationship between the positive temperature coefficient of resistivity and dynamic rheological behavior for carbon black-filled high-density polyethylene , 2003 .