Advanced Water Distribution Modeling and Management
暂无分享,去创建一个
[1] Hardy Cross,et al. Analysis of flow in networks of conduits or conductors , 1936 .
[2] Roy B Hunter. Methods of estimating loads in plumbing systems , 1940 .
[3] D. Caldwell,et al. Water Softening and Conditioning Problems , 1953 .
[4] E. A. Reinke. Protecting Water Quality in Distribution Systems , 1954 .
[5] Jerome B. Wolff,et al. Peak Demands in Residential Areas , 1961 .
[6] William D. Hudson,et al. Studies of Distribution System Capacity in Seven Cities , 1966 .
[7] Edward D. Mullen,et al. Potable‐Water Corrosion Control , 1974 .
[8] Lawrence B. Polkowski,et al. Network Models and the Impact of Modeling Assumptions , 1976 .
[9] Prabhata K. Swamee,et al. Explicit Equations for Pipe-Flow Problems , 1976 .
[10] T. N. Stevenson,et al. Fluid Mechanics , 2021, Nature.
[11] G. Williams,et al. Internal flow systems , 1980 .
[12] Don J. Wood. Slurry Flow in Pipe Networks , 1980 .
[13] Peter A. Lamont. Common pipe flow formulas compared with the theory of roughness , 1981 .
[14] Sabah Al-Nassri,et al. SOME PROBABILISTIC ELEMENTS OF FIELD TESTING IN WATER DISTRIBUTION SYS -TEMS. , 1983 .
[15] Thomas M. Walski,et al. Analysis of water distribution systems , 1984 .
[16] Robert M. Clark,et al. Algorithm for Mixing Problems in Water Systems , 1985 .
[17] Thomas M. Walski. Correction of Head Loss Measurements in Water Mains , 1985 .
[18] Chyr Pyng Liou,et al. Modeling the Propagation of Waterborne Substances in Distribution Networks , 1987 .
[19] Uri Shamir,et al. Schematic Models for Distribution Systems Design. II: Continuum Approach , 1988 .
[20] Thomas M. Walski,et al. Predicting Internal Roughness in Water Mains , 1988 .
[21] Robert M. Clark,et al. MODELING DISTRIBUTION-SYSTEM WATER QUALITY; DYNAMIC APPROACH , 1988 .
[22] Thomas M. Walski,et al. Loss of Carrying Capacity in Pipes—Transporting Softened Water with High pH , 1989 .
[23] Robert L. Sanks,et al. Pumping station design , 1989 .
[24] G. Hetsroni. Handbook of hydraulic resistance , 1990 .
[25] Thomas M. Walski,et al. Accuracy of Hydrant Flow Tests Using a Pitot Diffuser , 1990 .
[26] Robert M. Clark,et al. Field‐Testing Distribution Water Quality Models , 1991 .
[27] G. Czapar,et al. [Water quality]. , 1992, Verhandelingen - Koninklijke Academie voor Geneeskunde van Belgie.
[28] P. Bhave. Analysis of Flow in Water Distribution Networks , 1992 .
[29] Deon T. Fowles,et al. Pressure Pipeline Design for Water and Wastewater , 1992 .
[30] P. Boulos,et al. Discrete Volume‐Element Method for Network Water‐Quality Models , 1993 .
[31] Thomas M. Walski,et al. Head loss testing in transmission mains , 1994 .
[32] Robert M. Clark,et al. Modeling Chlorine Residuals in Drinking‐Water Distribution Systems , 1994 .
[33] R. Scott Summers,et al. Assessing DBP yield: uniform formation conditions , 1996 .
[34] Paul F. Boulos,et al. Water quality and mixing models for tanks and reservoirs , 1996 .
[35] Paul F. Boulos,et al. Numerical Methods for Modeling Water Quality in Distribution Systems: A Comparison , 1996 .
[36] Srinivasa Lingireddy,et al. Calibrating hydraulic network models , 1997 .
[37] Robert M. Clark,et al. Modeling Water Quality in Drinking Water Distribution Systems , 1998 .
[38] Marc Edwards,et al. Phosphate Inhibitors and Red Water in Stagnant Iron Pipes , 2000 .
[39] Thomas M. Walski,et al. Model calibration data: the good, the bad, and the useless , 2000 .
[40] Allen L. Davis,et al. General Purpose Demand Allocator (DALLOC) , 2000 .
[41] M. Lechevallier,et al. Practical evaluation of iron corrosion control in a drinking water distribution system , 2000 .
[42] Bryan,et al. Automatic Sprinkler Systems Handbook , 2002 .
[43] J Przybyla. WHAT STOPS FOLKS COLD FROM PURSUING GIS , 2002 .