Thermophysical properties of TiB2SiC ceramics from 300 °C to 1700 °C

[1]  S. Matsutomo,et al.  High-frequency induction heating of Ti-coated mild steel rod for minimally invasive ablation therapy of human cancer , 2013 .

[2]  Chuanzhen Huang,et al.  Mechanical properties and microstructure of TiB2–TiC composite ceramic cutting tool material , 2012 .

[3]  A. K. Suri,et al.  Densification, characterization and oxidation studies of TiB2 – WSi2 composite , 2012 .

[4]  A. K. Suri,et al.  Effect of CrSi2 and HfB2 addition on densification and properties of ZrB2 , 2012 .

[5]  G. Tu,et al.  Characterization of the structure of TiB2/TiC composites prepared via mechanical alloying and subsequent pressureless sintering , 2012 .

[6]  A. K. Suri,et al.  A new TiB2 + CrSi2 composite – Densification, characterization and oxidation studies , 2010 .

[7]  V. Jayaram,et al.  Synthesis and Densification of Monolithic Zirconium Carbide by Reactive Hot Pressing , 2010 .

[8]  V. Jayaram,et al.  Low‐Temperature Densification of TiN–TiB2 Composites Through Reactive Hot Pressing with Excess Ti Additions , 2009 .

[9]  Y. Sakka,et al.  Influence of microstructure on the thermophysical properties of sintered SiC ceramics , 2008 .

[10]  J. Narciso,et al.  Fabrication and properties of graphite flakes/metal composites for thermal management applications , 2008 .

[11]  V. Jayaram,et al.  Reactive hot pressing of titanium nitride-titanium diboride composites at moderate pressures and temperatures , 2005 .

[12]  Yu Zhou,et al.  Experimental description of thermomechanical properties of carbon fiber-reinforced TiC matrix composites , 2003 .

[13]  L. Matzui,et al.  Influence of graphite type on electrical and thermal properties of composite materials graphite-organic compound , 2003 .

[14]  C. García-Rosales,et al.  Improvement of the thermo-mechanical properties of fine grain graphite by doping with different carbides , 2002 .

[15]  S. Hull,et al.  Structural characterisation of the -type, high pressure phase of ruthenium dioxide , 1998 .

[16]  B. Basu,et al.  Hot-pressed TiB2-10 wt.% TiSi2 ceramic with extremely good thermal transport properties at elevated temperatures (up to 1273 K) , 2013 .

[17]  A. K. Suri,et al.  Densification and oxidation behavior of a novel TiB2–MoSi2–CrB2 composite , 2013 .

[18]  Bin Zou,et al.  Effects of sintering additives on microstructure and mechanical properties of TiB2–WC ceramic–metal composite tool materials , 2012 .

[19]  V. Jayaram,et al.  Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing , 2010 .

[20]  K. Woo,et al.  Consolidation of binderless WC–TiC by high frequency induction heating sintering , 2008 .

[21]  G. Hilmas,et al.  Evolution of structure during the oxidation of zirconium diboride–silicon carbide in air up to 1500 °C , 2007 .