Study of mechanical deformation in bulk metallic glass through instrumented indentation

Instrumented sharp indentation experiments at the nano- and micro-length scales were carried out in an attempt to quantify the deformation characteristics of Vitreloy 1  bulk metallic glass. The experiments were accompanied by detailed three-dimensional finite element simulations of instrumented indentation to formulate an overall constitutive response. By matching the experimentally observed continuous indentation results with the finite element predictions, a general Mohr-Coulomb type constitutive description was extracted to capture the dependence of multiaxial deformation on both shear stresses and normal stresses. This constitutive response is able to provide accurate predictions of the evolution of shear bands seen in uniaxial compression tests. Constrained deformation of the material around the indenter results in incomplete circular patterns of shear bands whose location, shape and size are also captured well by the numerical simulations. The analysis is also able to predict the extent of material pile-up observed around the indenter. The surface deformation features are also consistent with mechanisms such as localized shear flow, serrated yielding and adiabatic heating, which are observed during macroscopic mechanical tests.  2001 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.

[1]  Hung Chen.  REVIEW ARTICLE: Glassy metals , 1980 .

[2]  P. B. Bowden,et al.  The plastic flow of isotropic polymers , 1972 .

[3]  Subra Suresh,et al.  A new method for estimating residual stresses by instrumented sharp indentation , 1998 .

[4]  R. Hill.  The mathematical theory of plasticity , 1950 .

[5]  A. E. Giannakopoulos,et al.  Analysis of Berkovich indentation , 1996 .

[6]  M. Kakihana,et al.  Materials Research Society Symposium - Proceedings , 2000 .

[7]  James R. Rice,et al.  Strain localization in ductile single crystals , 1977 .

[8]  J. G. Wang,et al.  Crystallization and nanoindentation behavior of a bulk Zr–Al–Ti–Cu–Ni amorphous alloy , 2000 .

[9]  P. Donovan.  A yield criterion for Pd40Ni40P20 metallic glass , 1989 .

[10]  C. Pampillo.  Flow and fracture in amorphous alloys , 1975 .

[11]  Subra Suresh,et al.  DETERMINATION OF ELASTOPLASTIC PROPERTIES BY INSTRUMENTED SHARP INDENTATION , 1999 .

[12]  F. Luborsky.  Chapter 1 – Amorphous metallic alloys , 1983 .

[13]  Rustum Roy,et al.  Materials Research Society , 1984 .

[14]  P. Duwez,et al.  Non-crystalline Structure in Solidified Gold–Silicon Alloys , 1960, Nature.

[15]  W. Johnson.  Bulk Glass-Forming Metallic Alloys: Science and Technology , 1999 .

[16]  W. Johnson,et al.  Mechanical properties of tungsten and steel fiber reinforced Zr41.25Ti13.75Cu12.5Ni10Be22.5 metallic glass matrix composites , 1998 .

[17]  H. Chen,et al.  Thermodynamic considerations on the formation and stability of metallic glasses , 1974 .

[18]  Frans Spaepen,et al.  A microscopic mechanism for steady state inhomogeneous flow in metallic glasses , 1977 .

[19]  A. Argon.  Plastic deformation in metallic glasses , 1979 .

[20]  A. Inoue.  Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[21]  J. Lewandowski,et al.  Effects of superimposed hydrostatic pressure on flow and fracture of a Zr-Ti-Ni-Cu-Be bulk amorphous alloy , 1999 .

[22]  W. Drugan,et al.  Theory of plasticity , 1987 .

[23]  A. Giannakopoulos,et al.  Discrete and continuous deformation during nanoindentation of thin films , 2000 .