A methodology for evaluation of metal forming system design and performance via CAE simulation

In the current metal forming product development paradigm, product cost, time-to-market and product quality are three overriding issues, which determine the competitiveness of the developed products. In the up front design process, the first 20% of design activities commits to about 80% of product development cost and product quality issues. How to conduct ‘right the first time’ design is critical to ensure low development cost, high product quality and short time-to-market. To address these issues, state of the art technologies are needed. Traditionally, computer-aided design (CAD) and computer-aided manufacturing (CAM) technologies provide solutions for representation of design intent and realization of design solution physically. However, it is difficult to address some critical issues in the design of forming process, tooling structure, material selection and properties configuration, and finally the product quality control and assurance. Computer-aided engineering (CAE) technology fills this gap as it helps practitioners generate, verify, validate and optimize design solutions before they are practically implemented and physically realized. In this paper, a methodology for evaluation of metal forming system design and performance via CAE simulation is developed. The concept of metal forming system and its design is first articulated and how the CAE technology helps design and design solution evaluation is then presented. To assess and evaluate the performance of metal forming systems, quantitative design evaluation criteria are developed. Through industrial case study, how the developed methodology helps metal forming system design and evaluation is illustrated and its efficiency and validity is finally verified.

[1]  Ho-Chang Kim,et al.  Three-dimensional rigid-plastic finite element analysis of non-steady-state shaped drawing process , 1998 .

[2]  Shiro Kobayashi,et al.  Metal forming and the finite-element method , 1989 .

[3]  T. Ishikawa,et al.  Modeling approach to estimate the elastic characteristics of workpiece and shrink-fitted die for cold forging , 2004 .

[4]  C. H. Lee,et al.  New Solutions to Rigid-Plastic Deformation Problems Using a Matrix Method , 1973 .

[5]  Victor Vazquez,et al.  Numerical process simulation for tool and process design in bulk metal forming , 1996 .

[6]  Manfred Geiger,et al.  Estimation of tool life in bulk metal forming based on different failure concepts , 1998 .

[7]  Thomas Ørts Pedersen.  Numerical studies of low cycle fatigue in forward extrusion dies , 2000 .

[8]  Jae C. Choi,et al.  Precision forging of spur gears with inside relief , 1999 .

[9]  P. M. Dixit,et al.  Residual stresses in cold axisymmetric forging , 2003 .

[10]  Stefania Bruschi,et al.  Integrating physical and numerical simulation techniques to design the hot forging process of stainless steel turbine blades , 2004 .

[11]  Andrew Y. C. Nee,et al.  Computer-Aided Injection Mold Design and Manufacture , 2004 .

[12]  Khemais Saanouni,et al.  Improvement of forging process of a 3D complex part with respect to damage occurrence , 2003 .

[13]  Zijian Luo,et al.  The prediction of macro-defects during the isothermal forging process by the rigid-viscoplastic finite-element method , 1992 .

[14]  John Monaghan,et al.  Failure analysis of cold forging dies using FEA , 2001 .

[15]  Young Hoon Moon,et al.  Finite element investigation on spring-back characteristics in sheet metal U-bending process , 2003 .

[16]  M. S. Yong,et al.  CAE enabled methodology for die fatigue life analysis and improvement , 2005 .

[17]  Ming-Wang Fu,et al.  The simulation of the viscoplastic forming process by the finite-element method , 1995 .