论文信息 - An optimized design of a large stroke beam flexure-based parallel nano manipulator

An optimized design of a large stroke beam flexure-based parallel nano manipulator

In this paper, we improve the previous results for a bi-axial large stroke beam-flexure nano-manipulating servo stage by an optimized design. By means of elliptical integrals, the analytical results of the undesired motions of the key kinematic decoupling component (i.e. Π-shaped beam flexures) can be obtained, and then a set of optimized geometric parameters is provided. The overall design significantly reduces error motions, which is desired to support large stroke XY nano manipulation. A robust control algorithm is developed for nano-manipulation purposes. Based on the fabricated XY nano-stage, real time control and measurements are deployed, demonstrating the operating workspace up to 1.5 mm × 1.5 mm and the error of 77.8 nm (RMS) when tracking a circular trajectory with a diameter 1.0 mm.

Peng Wang | Zhen Zhang | Peng Yan

[1] S.O.R. Moheimani,et al. Minimizing Scanning Errors in Piezoelectric Stack-Actuated Nanopositioning Platforms , 2009, IEEE Transactions on Nanotechnology.

[2] Han Ding,et al. Motion stages for electronic packaging design and control , 2006, IEEE Robotics & Automation Magazine.

[3] Hayato Yoshioka,et al. A newly developed three-dimensional profile scanner with nanometer spatial resolution , 2010 .

[4] Kuo-Shen Chen,et al. Design and Control of a Piezoelectric Driven Fatigue Testing System for Electronic Packaging Applications , 2006, IEEE Transactions on Components and Packaging Technologies.

[5] Aimei Zhang,et al. A Comprehensive Elliptic Integral Solution to the Large Deflection Problems of Thin Beams in Compliant Mechanisms , 2012 .

[6] Shorya Awtar,et al. Design of a Large Range XY Nanopositioning System , 2010 .

[7] S O R Moheimani,et al. Invited review article: high-speed flexure-guided nanopositioning: mechanical design and control issues. , 2012, The Review of scientific instruments.