A Review on Powder Bed Fusion Additive Manufacturing for Metallic Fixation Implants

[1]  Boyang Huang,et al.  Topology optimised metallic bone plates produced by electron beam melting: a mechanical and biological study , 2019, The International Journal of Advanced Manufacturing Technology.

[2]  Arun Devaraj,et al.  A Review of Metastable Beta Titanium Alloys , 2018, Metals.

[3]  Ruxu Du,et al.  Three-dimensional printing of patient-specific surgical plates in head and neck reconstruction: A prospective pilot study. , 2018, Oral oncology.

[4]  Mythili Prakasam,et al.  Biodegradable Materials and Metallic Implants—A Review , 2017, Journal of functional biomaterials.

[5]  Rubens Caram,et al.  Laser additive processing of a functionally graded internal fracture fixation plate , 2017 .

[6]  Yang Yang,et al.  Comparison of conventional reconstruction plate versus direct metal laser sintering plate: an in vitro mechanical characteristics study , 2017, Journal of Orthopaedic Surgery and Research.

[7]  R. Banerjee,et al.  Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys , 2017, Science and technology of advanced materials.

[8]  W. Yeong,et al.  Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility. , 2017, Materials science & engineering. C, Materials for biological applications.

[9]  Paul Steinmann,et al.  Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V , 2017 .

[10]  Di Wang,et al.  Customized a Ti6Al4V Bone Plate for Complex Pelvic Fracture by Selective Laser Melting , 2017, Materials.

[11]  L. Murr.  Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication† , 2016 .

[12]  Ken Gall,et al.  Use of 3D Printed Bone Plate in Novel Technique to Surgically Correct Hallux Valgus Deformities , 2016, Techniques in orthopaedics.

[13]  R. Meneghello,et al.  Powder-based 3D printing for bone tissue engineering. , 2016, Biotechnology advances.

[14]  Anders Palmquist,et al.  Electron Beam Melting Manufacturing Technology for Individually Manufactured Jaw Prosthesis: A Case Report. , 2016, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[15]  Changkui Liu,et al.  A Comparison of Biocompatibility of a Titanium Alloy Fabricated by Electron Beam Melting and Selective Laser Melting , 2016, PloS one.

[16]  Mohammad Marufuzzaman,et al.  Additive manufacturing of biomedical implants: A feasibility assessment via supply-chain cost analysis , 2016 .

[17]  Lai‐Chang Zhang,et al.  Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review   , 2016 .

[18]  R. Dehoff,et al.  Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM) , 2016 .

[19]  Wai Yee Yeong,et al.  Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: A review on processes, materials and designs , 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[20]  Chor Yen Yap,et al.  Review of selective laser melting : materials and applications , 2015 .

[21]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[22]  Mikael Bäckström,et al.  Patient-Specific Clavicle Reconstruction Using Digital Design and Additive Manufacturing , 2015 .

[23]  T. S. Srivatsan,et al.  Additive Manufacturing of Medical Devices , 2015 .

[24]  P. Cerri,et al.  Biology of Bone Tissue: Structure, Function, and Factors That Influence Bone Cells , 2015, BioMed research international.

[25]  A. Oryan,et al.  Basic concepts regarding fracture healing and the current options and future directions in managing bone fractures , 2015, International wound journal.

[26]  Robert O Ritchie,et al.  Bone as a Structural Material , 2015, Advanced healthcare materials.

[27]  Alberto Bianchi,et al.  Computer-aided design and computer-aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning. , 2015, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[28]  Run Liu,et al.  A study on the mechanical characteristics of the EBM-printed Ti-6Al-4V LCP plates in vitro , 2014, Journal of Orthopaedic Surgery and Research.

[29]  S. Nakano,et al.  Cell Proliferation Ability of Mouse Fibroblast-Like Cells and Osteoblast-Like Cells on a Ti-6Al-4V Alloy Film Produced by Selective Laser Melting , 2014 .

[30]  B. Stucker,et al.  Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting , 2013, Journal of Materials Engineering and Performance.

[31]  M Browne,et al.  Long-term biocompatibility and osseointegration of electron beam melted, free-form–fabricated solid and porous titanium alloy: Experimental studies in sheep , 2013, Journal of biomaterials applications.

[32]  Mitsuo Niinomi,et al.  Biocompatibility of Ti-alloys for long-term implantation. , 2013, Journal of the mechanical behavior of biomedical materials.

[33]  Andrey Koptyug,et al.  Additive Manufacturing Technology Applications Targeting Practical Surgery , 2013 .

[34]  James C. Williams,et al.  Perspectives on Titanium Science and Technology , 2013 .

[35]  Wei Lei,et al.  Evaluation of Biological Properties of Electron Beam Melted Ti6Al4V Implant with Biomimetic Coating In Vitro and In Vivo , 2012, PloS one.

[36]  N. Umadevi,et al.  A Brief Study on Human Bone Anatomy and Bone Fractures , 2012 .

[37]  Ryan B. Wicker,et al.  Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science , 2012 .

[38]  Thomas A Einhorn,et al.  The biology of fracture healing. , 2011, Injury.

[39]  S. Biamino,et al.  Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation , 2011 .

[40]  Fernando B. Mainier,et al.  Characterization of prematurely failed stainless steel orthopedic implants , 2010 .

[41]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[42]  Paul J. Zhang,et al.  Essentials in Bone and Soft-Tissue Pathology: ` , 2010 .

[43]  Tushar Ramkrishna Mahale,et al.  Electron beam melting of advanced materials and structures. , 2009 .

[44]  Anna Spagnoli,et al.  Regenerative Effects of Transplanted Mesenchymal Stem Cells in Fracture Healing , 2009, Stem cells.

[45]  D. Forward,et al.  The use and abuse of locking plates , 2009 .

[46]  A. Singh,et al.  Ti based biomaterials, the ultimate choice for orthopaedic implants – A review , 2009 .

[47]  Ryan B. Wicker,et al.  Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V , 2009 .

[48]  B. Clarke,et al.  Normal bone anatomy and physiology. , 2008, Clinical journal of the American Society of Nephrology : CJASN.

[49]  B. Hanson,et al.  Surgeons' beliefs and perceptions about removal of orthopaedic implants , 2008, BMC musculoskeletal disorders.

[50]  M. Meyers,et al.  Biomedical applications of titanium and its alloys , 2008 .

[51]  Joachim Milberg,et al.  Electron beam sintering of metal powder , 2008, Prod. Eng..

[52]  C. Tabin,et al.  BMP2 activity, although dispensable for bone formation, is required for the initiation of fracture healing , 2006, Nature Genetics.

[53]  K. Jepsen,et al.  Three-dimensional Reconstruction of Fracture Callus Morphogenesis , 2006, The journal of histochemistry and cytochemistry : official journal of the Histochemistry Society.

[54]  J. Kruth,et al.  Selective laser melting of biocompatible metals for rapid manufacturing of medical parts , 2006 .

[55]  Ola L. A. Harrysson,et al.  Direct Fabrication of Custom Orthopedic Implants Using Electron Beam Melting Technology , 2006 .

[56]  J. M. Garcı́a,et al.  Modelling bone tissue fracture and healing: a review ☆ , 2004 .

[57]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[58]  Thomas A Einhorn,et al.  Fracture healing as a post‐natal developmental process: Molecular, spatial, and temporal aspects of its regulation , 2003, Journal of cellular biochemistry.

[59]  Mitsuo Niinomi,et al.  Recent metallic materials for biomedical applications , 2002 .

[60]  G. Pharr,et al.  Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation. , 1997, Biomaterials.

[61]  Kaderly Re.  Primary bone healing. , 1991 .

[62]  E. Meroi,et al.  A review of the biomechanical properties of bone as a material. , 1989, Journal of biomedical engineering.

[63]  G. Lewis,et al.  Fracture Fixation Biomechanics and Biomaterials , 2018 .

[64]  Guha Manogharan,et al.  Additive Manufacturing of Orthopedic Implants , 2018 .

[65]  Luca Iuliano,et al.  A literature review of powder-based electron beam melting focusing on numerical simulations , 2018 .

[66]  Frank Witte,et al.  Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective. , 2017, Biomaterials.

[67]  G. Thouas,et al.  Metallic implant biomaterials , 2015 .

[68]  C. Rao,et al.  Effect of Heat Treatment on Hardness of Co-Cr-Mo Alloy Deposited With Laser Engineered Net Shaping☆ , 2014 .

[69]  Marie Cronskär,et al.  On customization of orthopedic implants - from design and additive manufacturing to implementation , 2014 .

[70]  R. Maheswaran,et al.  Numerical Analysis of Fractured Femur Bone with Prosthetic Bone Plates , 2013 .

[71]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[72]  L. McNamara.  Bone as a Material , 2011 .

[73]  L. Murr,et al.  Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. , 2009, Journal of the mechanical behavior of biomedical materials.

[74]  M. Barbe,et al.  Bone Structure, Development and Bone Biology , 2009 .

[75]  B. Raj,et al.  Failures of Stainless Steel Orthopedic Devices - Causes and Remedies , 2003 .

[76]  T. Hanawa,et al.  9.04 – Failure Processes in Biometallic Materials , 2003 .

[77]  Hussam El-Din F. El-Shiekh.  Finite element simulation of hip joint replacement under static and dynamic loading , 2002 .

[78]  G. Hofmann.  Biodegradable implants in orthopaedic surgery--a review on the state-of-the-art. , 1992, Clinical materials.