Thermal properties of extruded and injection-molded poly(lactic acid)-based cuphea and lesquerella bio-composites

The degree of compatibility between poly (lactic acid) (PLA) and different bio-fillers was examined using thermal methods. The biofillers were fibers extracted from cuphea and lesquerella seeds. Bio-composites of PLA:Fiber were prepared at 85 : 15, 70 : 30, and 100 : 00 and blended by extrusion and then injection molding. Thermal properties of the extruded (EX) and the extruded- injection molded (EXIM) composites were examined using differential scanning calorimetry (DSC) and thermo gravi- metric analysis (TGA). Composites analysis using DSC provided information essential for determining: (1) glass transition (Tg); (2) crystallization and melting temperatures and DH; (3) percent crystallinity; and (4) Enthalpic Relaxa- tion (ER). TGA was used to measure the mechanism of the thermal decomposition of the composites. The effect of fiber composition, processing conditions, and aging time on the thermal properties of the bio-composites was used to examine the relative compatibility of the fibers with PLA. The data showed that ER increased steadily as a function of aging. Because of the difference in protein con- tent between cuphea and lesquerella, the two fibers influ- enced the Tg (temperature and DCp) differently. The percent crystallinity of neat PLA was significantly reduced by EX or EXIM, while the enzymatic degradation showed that EX composites are more biodegradable than EXIM. The TGA profiles indicated a multi-step degradation espe- cially in air. The largest value of q, which indicated that, intermolecular interaction was strongest between lesquer- ella and PLA extruded materials, compared to the other three blends, possibly due to the higher protein content. Results also indicated that intermolecular interaction was least strong (q ¼� 33.9156) in the EXIM PLA-cuphea. Although the q values of both cuphea composites were significantly lower than those of the lesquerella samples, this greater effect of extrusion over injection molding on intermolecular interaction was also seen in the q value of the EX and EXIM samples. V C 2008 Wiley Periodicals, Inc. y J Appl Polym Sci 111: 114-124, 2009

[1]  Sung-Woo Cho,et al.  Heat-sealing properties of compression-molded wheat gluten films , 2007 .

[2]  James S. Taylor,et al.  Ideal copolymers and the second‐order transitions of synthetic rubbers. i. non‐crystalline copolymers , 2007 .

[3]  Amar K. Mohanty,et al.  Welcome to the Journal of Biobased Materials and Bioenergy , 2007 .

[4]  Nilay Shah,et al.  Prospects for Bioenergy , 2007 .

[5]  J. L. Willett,et al.  Evaluation of Poly(lactic acid) and Sugar Beet Pulp Green Composites , 2007 .

[6]  T. Isbell,et al.  Batch drying of cuphea seeds , 2005 .

[7]  J. L. Willett,et al.  DSC study of biodegradable poly(lactic acid) and poly(hydroxy ester ether) blends , 2003 .

[8]  R. Holser.  Properties of refined milkweed press oil , 2003 .

[9]  Masayuki Nogami,et al.  Preparation of poly(lactic acid) composites containing calcium carbonate (vaterite). , 2003, Biomaterials.

[10]  M. Skrifvars,et al.  Natural fibres as reinforcement in polylactic acid (PLA) composites , 2003 .

[11]  J. L. Willett,et al.  Mechanical and Thermal Properties of Starch-Filled Poly(D,L-lactic acid)/Poly(hydroxy ester ether) Biodegradable Blends , 2003 .

[12]  Anil N. Netravali,et al.  Composites get greener , 2003 .

[13]  C. Chen,et al.  Preparation and characterization of biodegradable PLA polymeric blends. , 2003, Biomaterials.

[14]  E. Mathiowitz,et al.  Comparison of the enthalpic relaxation of poly(lactide–co‐glycolide) 50:50 nanospheres and raw polymer , 2002 .

[15]  A. Copinet,et al.  Biodegradation study of a starch and poly(lactic acid) co-extruded material in liquid, composting and inert mineral media , 2002 .

[16]  M. Kellomäki,et al.  Effect of filler content on mechanical and dynamic mechanical properties of particulate biphasic calcium phosphate--polylactide composites. , 2002, Biomaterials.

[17]  L. Avérous,et al.  Poly(lactic acid): plasticization and properties of biodegradable multiphase systems , 2001 .

[18]  Donald Garlotta,et al.  A Literature Review of Poly(Lactic Acid) , 2001 .

[19]  H. Bader,et al.  Influence of natural fibres on the mechanical properties of biodegradable polymers. , 1998 .

[20]  Stephen P. McCarthy,et al.  Reactive compatibilization of biodegradable blends of poly(lactic acid) and poly(ε-caprolactone) , 1998 .

[21]  M. Urban,et al.  Structure-Property Relations in Polymers: Spectroscopy and Performance , 1993 .

[22]  M. Charton,et al.  Correlation between the glass transition temperatures of polymer mixtures and intermolecular force parameters , 1987 .

[23]  L. Nicolais,et al.  Failure criteria for polymeric solids , 1971 .

[24]  M. Narkis,et al.  Stress–strain behavior of SAN/glass bead composites above the glass transition temperature , 1971 .

[25]  Joseph H. Flynn,et al.  A quick, direct method for the determination of activation energy from thermogravimetric data , 1966 .

[26]  F. Lam,et al.  Study of selected thermal characteristics of polypropylene/polyethylene binary blends using DSC and TGA , 2002 .

[27]  D. Weisleder,et al.  Synthesis and characteristics of polyhydroxy triglycerides from milkweed oil , 2002 .