Surface-modified Nafion membrane by trioctylphosphine-stabilized palladium nanoparticles for DMFC applications

Abstract Trioctylphosphine (TOP)/Pd composites have been synthesized and used as a methanol-barrier material to modify the surface of Nafion 115. The TOP/Pd composites have been applied to the surface of Nafion instead of being incorporated into the Nafion matrix, to provide the best chance of maintaining the inherent proton conductivity of Nafion. The properties of the TOP/Pd-modified membrane, in terms of its conductivity and methanol permeability, as well as the performance of the membrane electrode assembly (MEA) in direct methanol fuel cell (DMFC), have been analyzed and compared with those of bare Nafion. The DMFC performance of the TOP/Pd-modified membrane is somewhat better than that of the bare Nafion one at methanol concentration of 2 M and significantly better at a high concentration of 5 M. The TOP/Pd-modified membrane is able to operate the DMFC using a high concentration of methanol, which can satisfy the requirement to reduce the reactant volumes for portable applications as well as to achieve high performance. In contrast to bare Nafion, the TOP/Pd-modified membrane with its well-adhering and crack-free modified surface shows effect on reducing the methanol loss.

[1]  Qin Xin,et al.  Pd electroless plated Nafion® membrane for high concentration DMFCs , 2005 .

[2]  S. Woo,et al.  Evaluation of a palladinized Nafion™ for direct methanol fuel cell application , 2004 .

[3]  K. Friedrich,et al.  Transport properties of ionomer composite membranes for direct methanol fuel cells , 2002 .

[4]  Keonkuk Kim,et al.  Zirconium phosphate sulfonated poly (fluorinated arylene ether)s composite membranes for PEMFCs at 100–140 °C , 2006 .

[5]  Jesse S. Wainright,et al.  Acid-doped polybenzimidazoles : a new polymer electrolyte , 1995 .

[6]  Shimshon Gottesfeld,et al.  Methanol transport through Nafion membranes : Electro-osmotic drag effects on potential step measurements , 2000 .

[7]  S. Nakao,et al.  Pore-filling type polymer electrolyte membranes for a direct methanol fuel cell , 2003 .

[8]  David A. J. Rand,et al.  Direct methanol–air fuel cells for road transportation , 1999 .

[9]  P. Cabot,et al.  Palladium‐Assisted Electrodehalogenation of 1,1,2‐Trichloro‐1,2,2‐trifluoroethane on Lead Cathodes Combined with Hydrogen Diffusion Anodes , 1997 .

[10]  Christopher K. Dyer.  Fuel cells for portable applications , 2002 .

[11]  Vijay Ramani,et al.  Investigation of Nafion ® /HPA composite membranes for high temperature/low relative humidity PEMFC operation , 2004 .

[12]  Ih. Oh,et al.  Modification of polymer electrolyte membranes for DMFCs using Pd films formed by sputtering , 2002 .

[13]  T. Zhao,et al.  A palladium-alloy deposited Nafion membrane for direct methanol fuel cells , 2003 .

[14]  Angelika Heinzel,et al.  A review of the state-of-the-art of the methanol crossover in direct methanol fuel cells , 1999 .

[15]  D. Peck,et al.  A performance evaluation of direct methanol fuel cell using impregnated tetraethyl-orthosilicate in cross-linked polymer membrane , 2001 .

[16]  J. Besenhard,et al.  Preparation of Pd-coated polymer electrolyte membranes and their application in direct methanol fuel cells , 2005 .

[17]  Y. Sung,et al.  A Pd-impregnated nanocomposite Nafion membrane for use in high-concentration methanol fuel in DMFC , 2003 .

[18]  Won Choon Choi,et al.  Modification of proton conducting membrane for reducing methanol crossover in a direct-methanol fuel cell , 2001 .

[19]  V. Tricoli.  Proton and Methanol Transport in Poly(perfluorosulfonate) Membranes Containing Cs + and H + Cations , 1998 .

[20]  Wenhua Huang,et al.  A Methanol Impermeable Proton Conducting Composite Electrolyte System , 1995 .

[21]  Suzana P. Nunes,et al.  Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells , 2002 .

[22]  Se Young Oh,et al.  Synthesis and characterization of sulfonated polyimide membranes for direct methanol fuel cell , 2003 .

[23]  B. Schulte,et al.  Organic/inorganic composite membranes for application in DMFC , 2003 .

[24]  S. Wasmus,et al.  Methanol oxidation and direct methanol fuel cells: a selective review 1 In honour of Professor W. Vi , 1999 .

[25]  T. Hyeon,et al.  Facile Synthesis of Various Phosphine-Stabilized Monodisperse Palladium Nanoparticles through the Understanding of Coordination Chemistry of the Nanoparticles , 2004 .

[26]  S. C. Zhang,et al.  The Microstructure and Character of the PVDF-g-PSSA Membrane Prepared by Solution Grafting , 2003 .

[27]  S. Jiang,et al.  Self-assembling multi-layer Pd nanoparticles onto Nafion membrane to reduce methanol crossover , 2005 .

[28]  T. Zhao,et al.  Pd and Pd-Cu Alloy Deposited Nafion Membranes for Reduction of Methanol Crossover in Direct Methanol Fuel Cells , 2005 .

[29]  D. Peck,et al.  Performance evaluation of a Nafion/silicon oxide hybrid membrane for direct methanol fuel cell , 2002 .

[30]  S. Jiang,et al.  Synthesis of PDDA–Pt nanoparticles for the self-assembly of electrode/Nafion membrane interface of polymer electrolyte fuel cells , 2006 .

[31]  John Davey,et al.  Recent advances in direct methanol fuel cells at Los Alamos National Laboratory , 2000 .

[32]  Ji Young Kim,et al.  Surface-modified Nafion membrane by oleylamine-stabilized Pd nanoparticles for DMFC applications , 2007 .