Evaluation of Protein Adsorption on Atmospheric Plasma Deposited Coatings Exhibiting Superhydrophilic to Superhydrophobic Properties

Protein adsorption is one of the key parameters influencing the biocompatibility of medical device materials. This study investigates serum protein adsorption and bacterial attachment on polymer coatings deposited using an atmospheric pressure plasma jet system. The adsorption of bovine serum albumin and bovine fibrinogen (Fg) onto siloxane and fluorinated siloxane elastomeric coatings that exhibit water contact angles (θ) ranging from superhydrophilic (θ < 5°) to superhydrophobic (θ > 150°) were investigated. Protein interactions were evaluated in situ under dynamic flow conditions by spectroscopic ellipsometry. Superhydrophilic coatings showed lower levels of protein adsorption when compared with hydrophobic siloxane coatings, where preferential adsorption was shown to occur. Reduced levels of protein adsorption were also observed on fluorinated siloxane copolymer coatings exhibiting hydrophobic wetting behaviour. The lower levels of protein adsorption observed on these surfaces indicated that the presence of fluorocarbon groups have the effect of reducing surface affinity for protein attachment. Analysis of superhydrophobic siloxane and fluorosiloxane surfaces showed minimal indication of protein adsorption. This was confirmed by bacterial attachment studies using a Staphylococcus aureus strain known to bind specifically to Fg, which showed almost no attachment to the superhydrophobic coating after protein adsorption experiments. These results showed the superhydrophobic surfaces to exhibit antimicrobial properties and significantly reduce protein adsorption.

[1]  P. Tengvall,et al.  Protein adsorption on thin films of carbon and carbon nitride monitored with in situ ellipsometry. , 2011, Acta biomaterialia.

[2]  Pietro Favia,et al.  Plasma treatments and plasma deposition of polymers for biomedical applications , 1998 .

[3]  D. Robinson,et al.  Fnbpb Fibronectin-binding Proteins, Fnbpa and Phenotype Mediated by the Biofilm Staphylococcus Aureus a Novel , 2008 .

[4]  J. H. Lee,et al.  A wettability gradient as a tool to study protein adsorption and cell adhesion on polymer surfaces. , 1993, Journal of biomaterials science. Polymer edition.

[5]  L. O'Neill,et al.  Controlling deposition rates in an atmospheric pressure plasma system , 2008 .

[6]  J. Lai,et al.  Surface composition and protein adsorption of polyurethane membrane , 1999 .

[7]  Takashi Yasuda,et al.  A Superhydrophobic Microvalve for Manipulating Microliquids Containing Biological Molecules , 2008 .

[8]  Shih-Hsien Yang,et al.  Atmospheric-pressure plasma deposition of SiOx films for super-hydrophobic application , 2009 .

[9]  F. Veer,et al.  Ellipsometry as a tool to study the adsorption behavior of synthetic and biopolymers at the air–water interface , 1978 .

[10]  Xiao-Jun Ma,et al.  Effect of surface wettability and charge on protein adsorption onto implantable alginate-chitosan-alginate microcapsule surfaces. , 2009, Journal of biomedical materials research. Part A.

[11]  Yoshito Ikada,et al.  Effect of preadsorbed proteins on cell adhesion to polymer surfaces , 1993 .

[12]  Donald L. Wise,et al.  Biomaterials and Bioengineering Handbook , 2000 .

[13]  Takahiro Ishizaki,et al.  Correlation of cell adhesive behaviors on superhydrophobic, superhydrophilic, and micropatterned superhydrophobic/superhydrophilic surfaces to their surface chemistry. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[14]  A. Subramanian,et al.  In-situ protein adsorption study on biofunctionalized surfaces using spectroscopic ellipsometry , 2010 .

[15]  Junying Chen,et al.  Plasma-surface modification of biomaterials , 2002 .

[16]  Yusuke Arima,et al.  Effect of wettability and surface functional groups on protein adsorption and cell adhesion using well-defined mixed self-assembled monolayers. , 2007, Biomaterials.

[17]  I. Lundström,et al.  Effect of surface wettability on protein adsorption and lateral diffusion. Analysis of data and a statistical model , 1994 .

[18]  Tomohiro Onda,et al.  Super-Water-Repellent Fractal Surfaces , 1995 .

[19]  F. Rossi,et al.  Fluorocarbon Coatings Via Plasma Enhanced Chemical Vapor Deposition of 1H,1H,2H,2H‐perfluorodecyl Acrylate ‐ 2, Morphology, Wettability and Antifouling Characterization , 2010 .

[20]  David Farrar,et al.  Interpretation of protein adsorption: surface-induced conformational changes. , 2005, Journal of the American Chemical Society.

[21]  Mahfujur Rahman,et al.  The Influence of Process Parameters on Chemistry, Roughness and Morphology of Siloxane Films Deposited by an Atmospheric Plasma Jet System , 2009 .

[22]  M. Ferenets,et al.  Thin Solid Films , 2010 .

[23]  G. Whitesides,et al.  Effect of Surface Wettability on the Adsorption of Proteins and Detergents , 1998 .

[24]  B. K. Lok,et al.  Protein adsorption on crosslinked polydimethylsiloxane using total internal reflection fluorescence , 1983 .

[25]  Y. Missirlis,et al.  Concise review of mechanisms of bacterial adhesion to biomaterials and of techniques used in estimating bacteria-material interactions. , 2004, European cells & materials.

[26]  K. Tan,et al.  Surface modification of stainless steel by grafting of poly(ethylene glycol) for reduction in protein adsorption. , 2001, Biomaterials.

[27]  Z. Rymuza,et al.  Thin Films Deposition from Hexamethyldisiloxane and Hexamethyldisilazane under Dielectric-Barrier Discharge (DBD) Conditions , 2000 .

[28]  J. O’Gara,et al.  Essential Role for the Major Autolysin in the Fibronectin-Binding Protein-Mediated Staphylococcus aureus Biofilm Phenotype , 2010, Infection and Immunity.

[29]  F. Waldvogel,et al.  Infections Associated With Indwelling Medical Devices , 1989 .

[30]  Scott J. Mcclellan,et al.  Adsorption of bovine serum albumin at solid/aqueous interfaces , 2005 .

[31]  S. Foster,et al.  σB Modulates Virulence Determinant Expression and Stress Resistance: Characterization of a Functional rsbU Strain Derived from Staphylococcus aureus 8325-4 , 2002, Journal of bacteriology.

[32]  G McHale,et al.  Nano-scale superhydrophobicity: suppression of protein adsorption and promotion of flow-induced detachment. , 2008, Lab on a chip.

[33]  R. Brings,et al.  Protein adsorption on solid–liquid interfaces monitored by laser-ellipsometry , 2005 .

[34]  D. Dowling,et al.  Investigation of the Effects of Gas versus Liquid Deposition in an Aerosol-Assisted Corona Deposition Process , 2010 .

[35]  Harold A Scheraga,et al.  The thrombin-fibrinogen interaction. , 2004, Biophysical chemistry.

[36]  D. Castner,et al.  Surface Modification of Polymeric Biomaterials , 1997 .

[37]  J. O’Gara.  ica and beyond: biofilm mechanisms and regulation in Staphylococcus epidermidis and Staphylococcus aureus. , 2007, FEMS microbiology letters.

[38]  A. Seifalian,et al.  Dynamic protein adsorption at the polyurethane copolymer/water interface , 2008, Biomedical materials.

[39]  M. Khorasani,et al.  In vitro blood compatibility of modified PDMS surfaces as superhydrophobic and superhydrophilic materials , 2004 .

[40]  Mutaz B. Habal,et al.  Biomaterials and Bioengineering Handbook , 2001 .

[41]  M. Malmsten.  Ellipsometry studies of the effects of surface hydrophobicity on protein adsorption , 1995 .

[42]  C. Siedlecki,et al.  Effects of surface wettability and contact time on protein adhesion to biomaterial surfaces. , 2007, Biomaterials.

[43]  R. Misra,et al.  Biomaterials , 2008 .

[44]  H. Slayter,et al.  ELECTRON MICROSCOPIC STUDIES OF FIBRINOGEN STRUCTURE: HISTORICAL PERSPECTIVES AND RECENT EXPERIMENTS * , 1983, Annals of the New York Academy of Sciences.

[45]  I. Parkin,et al.  An investigation into bacterial attachment to an elastomeric superhydrophobic surface prepared via aerosol assisted deposition , 2011 .