论文信息 - Planning feed speed in cold ring rolling

Planning feed speed in cold ring rolling

Feed speed needs to be controlled during cold ring rolling but first it must be planned. However, up to now, it has been set mainly by trials and experience, as the existing method is inefficient. This paper aims to find a convenient method to plan feed speed. In this study, the ring outer diameter growth rate was regarded as the basic quantity to determine the feed speed. A mathematical model is built on analysis of the reason for the ring enlargement during rolling. The model defines the relationship between the ring outer diameter growth rate and feed speed. Using the model, the feed speed was planned versus the thickness of the rolling ring. The extrema of the feed speed and the ring outer diameter growth rate were also determined. The method of planning the feed speed based on the ring outer diameter growth rate is efficient and economical, and it facilitates process control for cold ring rolling.

[1] W. Johnson,et al. Analyses for roll force and torque in ring rolling, with some supporting experiments , 1973 .

[2] Hua Lin,et al. The extremum parameters in ring rolling , 1997 .

[3] Naksoo Kim,et al. Ring rolling process simulation by the three dimensional finite element method , 1990 .

[4] Ulrich Koppers. Optimizing the ring-rolling operation with process control , 1992 .

[5] H. D. Choi,et al. An Adaptive Control Approach to the Ring Geometry Control for Radial-Axial Ring Rolling Processes , 1989 .

[6] C. Xie,et al. Rigid–viscoplastic dynamic explicit FEA of the ring rolling process , 2000 .

[7] André Hardtmann,et al. Ring rolling research at the Dresden University of Technology: its history from the beginning in the 70s to the present , 2005 .

[8] Ichiro Takasu,et al. Elastic–plastic finite element analysis of cold ring rolling process , 2002 .

[9] J. Oudin,et al. Simulation of ring rolling with new wax-based model materials on a flexible experimental machine , 1988 .

[10] Dong-Yol Yang,et al. The influence of process parameters on torque and load in ring rolling , 1986 .

[11] Dong-Yol Yang,et al. An Investigation into the Relationship between Torque and Load in Ring Rolling , 1987 .