Barium boron aluminum silicate glass system for solid state optical gas sensors

Recent increasing demand for new eco-friendly materials and for low cost fabrication process for use in optical sensors field, raise concern about alternative materials for this application. We have designed two glass-ceramics compositions from the quaternary ROAl2O3- SiO2-B2O3(R=Ba) alkali-earth aluminum silicate system, labeled B72 and B69, with high refractive index (>1.6), large values of Abbe number (94.0 and 53.0, respectively), and free of lead and arsenic. We present an analysis and discussion of experimental optical properties, thermal and thermo-chemical stability along with important properties such as transition temperature (Tg), onset of crystallization (Tx) as well transport properties as ionic conductivity behavior in the quaternary glass-ceramic system containing boron for use as optical sensors. Complex Impedance Spectra (Bode Plot) and Potentiodynamic Polarization curves (Tafel plots) measurements were carried out in the temperature range of 600 to 850°C. The most probable conductivity mechanism is a thermally activated process of mobile ions overcoming a potential barrier (EA), according to the Arrhenius regime. Here we report that charge transfer is caused by the flux of electrons, in the region of elevated temperatures (>700°C), and is affected by immiscibility of crystals, nucleation and growth type, that causes phase separation. We found conductivity (σ) values from 10-9 to 10-5 S/cm at temperatures between 700 and 850°C. Our results highlight a need for research on ion mobility in the glassy network above the transition range, and the effect cause by metastable immiscibility in the alkaline-earth glasses are exposed. The two glass compositions B72 and B69 can be tailored by proper use as glassy optical sensor.

[1]  M. Kukizaki Large-scale production of alkali-resistant Shirasu porous glass (SPG) membranes: Influence of ZrO2 addition on crystallization and phase separation in Na2O–CaO–Al2O3–B2O3–SiO2 glasses; and alkali durability and pore morphology of the membranes , 2010 .

[2]  Jianqiu Wang,et al.  Relationship between amorphous structure and corrosion behaviour in a Zr-Ni metallic glass , 2012 .

[3]  Amala Paul Chemistry of glasses , 1982 .

[4]  S. Mello-Castanho,et al.  Glass ceramic sealants belonging to BAS (BaO-Al2O3-SiO2) ternary system modified with B2O3 addition: a different approach to access the SOFC seal issue , 2016 .

[5]  E. M. Levin,et al.  Shape of Liquid Immiscibility Volume in the System Barium Oxide-Boric Oxide-Silica , 1958 .

[6]  J. Stojanović,et al.  Crystallization and sinterability of glass-ceramics in the system La2O3–SrO–B2O3 , 2014 .

[7]  Danqing Zhu,et al.  Corrosion Protection Properties of Organofunctional Silanes—An Overview , 2005 .

[8]  L. P. Eksperiandova,et al.  Recent trends of ceramic humidity sensors development: A review , 2016 .

[9]  J. Sanz,et al.  High barium content lead and alkaline-free glasses , 2014 .

[10]  Howard F. McMurdie,et al.  Phase diagrams for ceramists , 1964 .

[11]  P. Aswath,et al.  Kinetics of the hexacelsian to celsian transformation in barium aluminosilicates doped with CaO , 2001 .

[12]  Ski,et al.  Three electrode configuration measurements of electrolyte-diffusion barrier-cathode interface , 2015 .

[13]  Zhong-hong Jiang,et al.  The structure of glass: A phase equilibrium diagram approach , 2014 .

[14]  A. Chandra,et al.  Ion Conduction in Superionic Glassy Electrolytes: An Overview , 2013 .

[15]  Enrico Traversa,et al.  Ceramic sensors for humidity detection: the state-of-the-art and future developments , 1995 .