Microstructure, electric flame-off (EFO) characteristics and tensile properties of silver-lanthanum alloy wire

Abstract Silver has potential for application in the electronic packaging industry because of its great electrical and thermal properties and lower price compared to that of gold. Silver oxidizes easily, so doping lanthanum to form Ag–La alloy improves its anti-oxidation capacity. In this study, the microstructure, tensile properties, electronic flame-off (EFO) characteristics, and fusing current of Ag–La alloy wire (φ = 20 μm) are studied. Samples annealed at three temperatures (325 °C, 375 °C, and 425 °C) are analyzed. According to the experimental results, after annealing at 425 °C, Ag–La alloy wire recrystallized, giving it a tensile strength similar to that of pure silver wire and a uniform structure. Doping lanthanum reduced the diameter of free air balls (FABs) in the EFO process. The fusing current of Ag–La wire was about 0.45 A, and the grains of Ag–La wire grew to the size of the wire diameter when a 0.4 A current (90% fusing current) was applied for a long time. Ag–La alloy wire can be used in the electronic packaging industry.

[1]  Li-Hui Chen,et al.  Effect of the direct current on microstructure, tensile property and bonding strength of pure silver wires , 2013, Microelectron. Reliab..

[2]  S. Bhagat,et al.  Influence of Joule heating during electromigration evaluation of silver lines , 2009 .

[3]  Z. W. Zhong,et al.  Overview of wire bonding using copper wire or insulated wire , 2011, Microelectron. Reliab..

[4]  Fei-Yi Hung,et al.  Recrystallization of Ag and Ag-La Alloy Wire in Wire Bonding Process , 2013 .

[5]  Sinn-wen Chen,et al.  Effects upon interfacial reactions by electric currents of reversing directions , 2003 .

[6]  Li-Hui Chen,et al.  Microstructure, electric flame-off characteristics and tensile properties of silver bonding wires , 2011, Microelectron. Reliab..

[7]  T. Lui,et al.  Microstructures and fusing electrical current of microelectronic Sn-9Zn-(0.25RE) solders , 2008 .

[8]  Li-Hui Chen,et al.  Recrystallization Effect and Electric Flame-Off Characteristic of Thin Copper Wire , 2006 .

[9]  Tomohiro Uno,et al.  Enhancing bondability with coated copper bonding wire , 2011, Microelectron. Reliab..

[10]  T. Alford,et al.  Effect of alloying and cladding on the failure of silver metallization under high temperature and current stressing , 2005 .

[11]  Li-Hui Chen,et al.  Electrical current induced mechanism in microstructure and nano-indention of Al-Zn-Mg-Cu (AZMC) Al alloy thin film , 2011 .

[12]  Sinn-wen Chen,et al.  Electromigration effect upon the Sn/Ag and Sn/Ni interfacial reactions at various temperatures , 2002 .

[13]  Hao Tang,et al.  Challenges and developments of copper wire bonding technology , 2012, Microelectronics and reliability.

[14]  Narasimalu Srikanth,et al.  Grains, deformation substructures, and slip bands observed in thermosonic copper ball bonding , 2003 .

[15]  S. Khoury,et al.  A comparison of copper and gold wire bonding on integrated circuit devices , 1990 .