Stator Winding Connection-Mode Management in Line-Start Permanent Magnet Motors to Improve Their Efficiency and Power Factor

Three-phase line-start permanent magnet motors (LSPMs) are a recent entrance in the marketplace. In general, such motors are designed to meet IE4/Super-Premium Class requirements. As with squirrel-cage induction motors, LSPMs can benefit in terms of efficiency and power factor from a proper magnetizing flux adjustment as a function of their load. This is important to improve the motor performance when it is oversized and/or driving variable-load fixed-speed applications. In this paper, an experimental study on the improvement potential of steady-state partial-load efficiency and power factor in special multiconnection LSPMs with up to six different flux levels is presented. Some novel conclusions are offered regarding the efficiency and power factor gains and connection-mode management as a function of motor actual load, including the delta-star change in conventional six-terminal LSPMs. With the proposed solution, efficiency gains of 6-8% points and power factor gains of 0.4-0.5 points can be obtained in LSPMs at light partial loads, representing a very significant performance improvement. Moreover, it is demonstrated that reactive power injection into the mains grid is possible with LSPMs.

[1]  F.J.T.E. Ferreira,et al.  Method for in-field evaluation of the stator winding connection of three-phase induction motors to maximize efficiency and power factor , 2006, IEEE Transactions on Energy Conversion.

[2]  N. Sadowski,et al.  Magnet flux optimization method for Line-Start Permanent Magnet motors , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[3]  Sakae Yamamura.  Saliency torque and V-curve of permanent-magnet-excited synchronous motor , 2000 .

[4]  F.J.T.E. Ferreira,et al.  Novel Multi-Flux Level, Three-Phase, Squirrel-Cage Induction Motor for Efficiency and Power Factor Maximization , 2006, 2006 IEEE International Conference on Industrial Technology.

[5]  Guang Yang,et al.  Optimal design and experimental verification of a line-start permanent magnet synchronous motor , 2008, 2008 International Conference on Electrical Machines and Systems.

[6]  K. Kurihara,et al.  High efficiency line-start interior permanent magnet synchronous motors , 2003 .

[7]  P. Virtic,et al.  Line-Starting Three- and Single-Phase Interior Permanent Magnet Synchronous Motors—Direct Comparison to Induction Motors , 2008, IEEE Transactions on Magnetics.

[8]  Zhang Wei,et al.  Design and starting process analysis of multipolar line-start PMSM , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[9]  Narayan C. Kar,et al.  Steady-state performance analysis of interior permanent magnet synchronous machines using the classical D-Q model , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[10]  F.J.T.E. Ferreira,et al.  Novel Multiflux Level, Three-Phase, Squirrel-Cage Induction Motor for Efficiency and Power Factor Maximization , 2008, IEEE Transactions on Energy Conversion.

[11]  Byung-taek Kim,et al.  Analysis of magnetization of magnet in the rotor of line start permanent magnet motor , 2003 .

[12]  Fernando J. T. E. Ferreira,et al.  Beyond Induction Motors—Technology Trends to Move Up Efficiency , 2013, IEEE Transactions on Industry Applications.

[13]  Hans-Peter Nee,et al.  Determination of d and q reactances of permanent-magnet synchronous motors without measurements of the rotor position , 2000 .

[14]  Mihail V. Cistelecan,et al.  Adjustable flux three phase a.c. machines with combined multiple-step star-delta winding connections , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[15]  Mihail Popescu,et al.  Adjustable Flux Three-Phase AC Machines With Combined Multiple-Step Star-Delta Winding Connections , 2010, IEEE Transactions on Energy Conversion.

[16]  M.V. Cistelecan,et al.  Claw-pole line-start permanent-magnet synchronous motor design and development , 2009, 2009 8th International Symposium on Advanced Electromechanical Motion Systems & Electric Drives Joint Symposium.

[17]  M.V. Cistelecan,et al.  Simulating multi-connection, three-phase, squirrel-cage, induction motors by means of changing the per-phase equivalent circuit parameters , 2008, 2008 18th International Conference on Electrical Machines.

[18]  B. Kwon,et al.  Design of post-assembly magnetization system of line start permanent-magnet motors using FEM , 2005 .

[19]  Fernando J. T. E. Ferreira,et al.  Technical and Economical Considerations on Super High-Efficiency Three-Phase Motors , 2012, IEEE Transactions on Industry Applications.

[20]  N. Takorabet,et al.  Design and Analysis of Different Line-Start PM Synchronous Motors for Oil-Pump Applications , 2009, IEEE Transactions on Magnetics.

[21]  João A. C. Fong,et al.  Standards for Efficiency of Electric Motors , 2011, IEEE Industry Applications Magazine.

[22]  Majid Ghasemi Kahrisangi,et al.  Line-start permanent magnet synchronous motors versus induction motors: A comparative study , 2012 .

[23]  Hans-Peter Nee,et al.  Study of the synchronization of line-start permanent magnet synchronous motors , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[24]  K. Ide,et al.  Transient-torque analysis for line-starting permanent-magnet synchronous motors , 2008, 2008 18th International Conference on Electrical Machines.