Effect of variable friction coefficient on sheet metal drawing

A variable friction model that relates the parameters of sheet metal drawing to the local lubrication conditions taking place during the deformation, has been integrated to a finite element program. Variable friction coefficients for the contacting surfaces are determined from the friction model, which uses the related parameters obtained at each time step of the finite element program as inputs. A number of numerical runs have been performed and the strains are compared with the experimental results for circular blanks. A good agreement is obtained between the numerical and experimental results for the variable friction model used.

[1]  Haluk Darendeliler,et al.  Deformation Analysis of Deep-Drawing by a Finite Element Method , 1991 .

[2]  Andreas A. Polycarpou,et al.  Two-Dimensional Models of Boundary and Mixed Friction at a Line Contact , 1995 .

[3]  D. C. Sun,et al.  Hydrodynamic lubrication in hemispherical punch stretch forming , 1986 .

[4]  H. Cheng,et al.  An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication , 1978 .

[5]  T. Hsu,et al.  A Realistic Friction Model for Computer Simulation of Sheet Metal Forming Processes , 1995 .

[6]  William R. D. Wilson,et al.  Friction models for metal forming in the boundary lubrication regime , 1991 .

[7]  H. Cheng,et al.  Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces , 1979 .

[8]  W. Wilson,et al.  Hydrodynamic Lubrication in Simple Stretch Forming Processes , 1984 .

[9]  P. Saha,et al.  Influence of plastic strain on friction in sheet metal forming , 1994 .

[10]  A. Soom,et al.  Friction at a Lubricated Line Contact Operating at Oscillating Sliding Velocities , 1990 .

[11]  S. Kalpakjian,et al.  Low-Speed Mixed Lubrication of Metal-Forming Processes , 1995 .

[12]  J. Tripp.  Surface Roughness Effects in Hydrodynamic Lubrication: The Flow Factor Method , 1983 .

[13]  William R. D. Wilson,et al.  Real area of contact and boundary friction in metal forming , 1988 .

[14]  D. C. Sun,et al.  Hydrodynamic lubrication in hemispherical punch stretch forming—Modified theory and experimental validation , 1987 .

[15]  Andres Soom,et al.  Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part II—Friction Transients , 1995 .

[16]  Andreas A. Polycarpou,et al.  Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part I—System Model , 1995 .

[17]  Taylan Altan,et al.  Analysis of axisymmetric cup drawing in relation to friction , 1996 .

[18]  Tung-Sheng Yang.  Full film lubrication of deep drawing , 1999 .