Generalized PWM generator with transformer flux balancing for dual active bridge converter

For Dual Active Bridge (DAB) converters a large number of modulation schemes exist, which allow to operate the converter in a wide voltage/power range at a very high efficiency. However, the implementation of these modulation schemes and the transition between the schemes during transient conditions is relatively complicated. Therefore, a simple and flexible concept for generating the PWM signals of the eight switches for all possible modulation schemes and also transient conditions is presented in this paper. The concept is validated by Simulink/Plecs co-simulations for a single module of interleaved DC-DC converter system designed as a battery interface for high power drive systems.

[1]  G.O. Garcia,et al.  Switching Control Strategy to Minimize Dual Active Bridge Converter Losses , 2009, IEEE Transactions on Power Electronics.

[2]  J. A. Ferreira,et al.  Optimal operating ranges of three modulation methods in dual active bridge converters , 2009, 2009 IEEE 6th International Power Electronics and Motion Control Conference.

[3]  Seung-Ki Sul,et al.  A dual-phase-shift control strategy for dual-active-bridge DC-DC converter in wide voltage range , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[4]  Robert L. Steigerwald,et al.  A comparison of high power DC-to-DC soft-switched converter topologies , 1994 .

[5]  Francisc C. Schwarz,et al.  An improved method of resonant current pulse modulation for power converters , 1976, 1975 IEEE Power Electronics Specialists Conference.

[6]  Florian Krismer,et al.  Modeling and optimization of bidirectional dual active bridge DC-DC converter topologies , 2010 .

[7]  Wenhua Liu,et al.  Overview of Dual-Active-Bridge Isolated Bidirectional DC–DC Converter for High-Frequency-Link Power-Conversion System , 2014, IEEE Transactions on Power Electronics.

[8]  Haihua Zhou,et al.  Hybrid Modulation for Dual-Active-Bridge Bidirectional Converter With Extended Power Range for Ultracapacitor Application , 2009 .

[9]  K. Vangen,et al.  Efficient high-frequency soft-switched power converter with signal processor control , 1991, [Proceedings] Thirteenth International Telecommunications Energy Conference - INTELEC 91.

[10]  M. Steiner,et al.  Medium frequency topology in railway applications , 2007, 2007 European Conference on Power Electronics and Applications.

[11]  F.C. Schwarz,et al.  A Method of Resonant Current Pulse Modulation for Power Converters , 1970, IEEE Transactions on Industrial Electronics and Control Instrumentation.

[12]  D.M. Divan,et al.  A three-phase soft-switched high power density DC/DC converter for high power applications , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[13]  S. Bernet,et al.  Optimization of a series resonant DCIDC converter for traction applications , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[14]  Raimo Juntunen,et al.  Variable-Frequency Phase Shift Modulation of a Dual Active Bridge Converter , 2015, IEEE Transactions on Power Electronics.

[15]  Felix Jauch,et al.  Combined Phase-Shift and Frequency Modulation of a Dual-Active-Bridge AC–DC Converter With PFC , 2016, IEEE Transactions on Power Electronics.

[16]  Hua Bai,et al.  Eliminate Reactive Power and Increase System Efficiency of Isolated Bidirectional Dual-Active-Bridge DC–DC Converters Using Novel Dual-Phase-Shift Control , 2008, IEEE Transactions on Power Electronics.

[17]  J.W. Kolar,et al.  A comparative evaluation of isolated bi-directional DC/DC converters with wide input and output voltage range , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[18]  Nikolaus Schibli.  Symmetrical multilevel converters with two quadrant DC-DC feeding , 2000 .

[19]  Drazen Dujic,et al.  Characterization of 6.5 kV IGBTs for High-Power Medium-Frequency Soft-Switched Applications , 2014, IEEE Transactions on Power Electronics.

[20]  A K Jain,et al.  Pwm control of dual active bridge: Comprehensive analysis and experimental verification , 2011, IEEE Transactions on Power Electronics.

[21]  D.M. Divan,et al.  Performance characterization of a high power dual active bridge DC/DC converter , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[22]  J. Kolar,et al.  Closed Form Solution for Minimum Conduction Loss Modulation of DAB Converters , 2012, IEEE Transactions on Power Electronics.