Bottom-up cost evaluation of SOEC systems in the range of 10–100 MW

Abstract A detailed bottom-up cost evaluation of SOEC systems in the range of 10–100 MW was carried out based on recent experimental results in the SOEC field. Capital costs of installed SOEC systems were evaluated starting from raw SOEC materials. Two scenarios were defined, assuming different capacities of SOEC units, yearly production capacities of SOEC cells and stacks as well as operating conditions of manufacturing lines. It resulted in installed capital costs of 309–395 €/kW for SOEC units integrated into power-to-methane plants (reference case) and of 380–494 €/kW for stand-alone SOEC units. This highlights the cost reduction potential of the SOEC technology when thermally coupled with a steam source. These costs were compared with previous capital cost estimates for future SOEC, proton exchange membrane (PEM) and alkaline electrolysis systems available in the literature. A sensitivity analysis allowed to identify which parameters have the highest impact on installed system costs. In the least favorable conditions, it was estimated that they could raise up to 494–618 €/kW for SOEC units in the reference case and up to 573–727 €/kW for stand-alone SOEC units.

[1]  D. Meadows,et al.  The limits to growth. A report for the Club of Rome's project on the predicament of mankind. , 1972 .

[2]  F. Graf,et al.  Renewable Power-to-Gas: A technological and economic review , 2016 .

[3]  J. Svensson,et al.  Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Evolution of electrical properties , 2015 .

[4]  Chakib Bouallou,et al.  Economic assessment of a power-to-substitute-natural-gas process including high-temperature steam electrolysis , 2015 .

[5]  James E. O'Brien,et al.  System Evaluation and Life-Cycle Cost Analysis of a Commercial-Scale High-Temperature Electrolysis Hydrogen Production Plant , 2012 .

[6]  J. O’Brien,et al.  High-temperature electrolysis for large-scale hydrogen and syngas production from nuclear energy: summary of system simulation and economic analyses , 2010 .

[7]  J. Hansen.  Fuel processing for fuel cells and power to fuels as seen from an industrial perspective , 2015 .

[8]  K. Schoots,et al.  Learning curves for hydrogen production technology: An assessment of observed cost reductions , 2008 .

[9]  R. Streicher,et al.  Hydrogen production by high temperature electrolysis of water vapour , 1980 .

[10]  Yong Yang,et al.  SOLID OXIDE FUEL CELL MANUFACTURING COST MODEL: SIMULATING RELATIONSHIPS BETWEEN PERFORMANCE, MANUFACTURING, AND COST OF PRODUCTION , 2004 .

[11]  Qingxi Fu,et al.  Syngas production via high-temperature steam/CO2 co-electrolysis: an economic assessment , 2010 .

[12]  A. Isenberg.  Energy conversion via solid oxide electrolyte electrochemical cells at high temperatures , 1981 .

[13]  Max Wei,et al.  A Direct Manufacturing Cost Model for Solid‐Oxide Fuel Cell Stacks , 2017 .

[15]  F. Petipas.  Conception et conduite de systèmes d'électrolyse à haute température alimentés par des énergies renouvelables , 2013 .

[16]  B. James,et al.  Final Report: Hydrogen Production Pathways Cost Analysis (2013 – 2016) , 2016 .

[17]  M. Hubbert,et al.  Nuclear energy and the fossil fuels , 1956 .

[18]  A. Hawkes,et al.  Future cost and performance of water electrolysis: An expert elicitation study , 2017 .

[19]  C. Bouallou,et al.  Parametric study of an efficient renewable power-to-substitute-natural-gas process including high-temperature steam electrolysis , 2014 .

[20]  M. D. S. Jean,et al.  Stack performances in high temperature steam electrolysis and co-electrolysis , 2015 .

[21]  A. T. Holen,et al.  A Norwegian case study on the production of hydrogen from wind power , 2007 .

[22]  Chakib Bouallou,et al.  Investigation of power-to-methanol processes coupling electrolytic hydrogen production and catalytic CO2 reduction , 2016 .

[23]  Koichi Yamada,et al.  Evaluation of cost reduction potential for 1 kW class SOFC stack production: Implications for SOFC technology scenario , 2013 .

[24]  Ludger Blum,et al.  Influence of operating parameters on overall system efficiencies using solid oxide electrolysis technology , 2015 .

[25]  S. Jensen,et al.  Hydrogen and synthetic fuel production from renewable energy sources , 2007 .

[26]  Detlef Stolten,et al.  Learning Curves for Solid Oxide Fuel Cells , 2012 .

[27]  Robert J. Braun,et al.  Hydrogen and synthetic fuel production using high temperature solid oxide electrolysis cells (SOECs) , 2015 .

[28]  J. Otomo,et al.  Coupled analysis of performance and costs of segmented-in-series tubular solid oxide fuel cell for combined cycle system , 2017 .

[29]  Andrew Martin,et al.  Integration of solid oxide electrolyser, entrained gasification, and Fischer-Tropsch process for synthetic diesel production : Thermodynamic analysis , 2018 .

[30]  A. Brisse,et al.  23,000 h steam electrolysis with an electrolyte supported solid oxide cell , 2017 .

[31]  M. Zahid,et al.  High temperature water electrolysis in solid oxide cells , 2008 .

[32]  F. Tietz,et al.  Magnetron-sputtered cobalt-based protective coatings on ferritic steels for solid oxide fuel cell interconnect applications , 2012 .

[33]  A. Brisse,et al.  Long-term Steam Electrolysis with Electrolyte-Supported Solid Oxide Cells , 2015 .

[34]  W. Doenitz,et al.  Concepts and design for scaling up high temperature water vapour electrolysis , 1982 .

[35]  Greg A. Whyatt,et al.  Cost Study for Manufacturing of Solid Oxide Fuel Cell Power Systems , 2013 .