Classification of crankshaft remanufacturing using Mahalanobis-Taguchi system

Remanufacturing is a process of returning a used product to at least its original performance with a warranty that is equivalent or better than that of a newly manufactured product. During a preliminary inspection on remanufacturing companies, it was found that there is no end life for crankshafts in terms of classifying it either to remanufacture, repair or reject due to limited information provided by the original equipment manufacturer. The manufacturer did not provide any information on the annual quantity produced and their specifications to the remanufacturing company for the purpose of referencing. Eventually, the distinctiveness of the remanufactured crankshaft from the original cannot be measured. Thus, the aim of this work is to classify crankshafts' end life into recovery operations based on the Mahalanobis-Taguchi System. The crankpin diameter of six engine models were measured in order to develop a scale that represents their population in a scatter diagram. It was found that on the diagram of each engine model, the left distributions from the center point belong to rejected crankshafts, the right distributions belong to re-manufacturable crankshafts, and the upper distributions belong to the repairable crankshafts. The developed scale is believed to be able to help remanufacturers instantaneously identify and match any unknown model crankshafts to its right category. The Ministry of International Trade & Industry (MITI) has established a remanufacturing policy under RMK11 and put in efforts to encourage Malaysians to venture into the remanufacturing business. Thus, this model will help the industry to understand and formulate their decision-making to sustain the end of life of their products.

[1]  Jeremy L. Rickli,et al.  Triage as a core sorting strategy in extreme core arrival scenarios , 2015 .

[2]  Magdalene Andrew-Munot,et al.  Remanufacturing Process And Its Challenges , 2013 .

[3]  Fernando Cruz-Peragón,et al.  A methodology for cracks identification in large crankshafts , 2011 .

[4]  R. Steinhilper,et al.  Opportunities for remanufactured electronic products from developing countries: hypotheses to characterise the perspectives of a global remanufacturing industry , 2004, 2004 IEEE Africon. 7th Africon Conference in Africa (IEEE Cat. No.04CH37590).

[5]  K. Ramachandra,et al.  A Method to Improve Reliability of Gearbox Fault Detection with Artificial Neural Networks , 2010 .

[6]  Robert B. Randall,et al.  Model-based diagnosis of large diesel engines based on angular speed variations of the crankshaft , 2010 .

[7]  Yoshiko Hasegawa,et al.  Quality Recognition & Prediction: Smarter Pattern Technology with the Mahalanobis-Taguchi System , 2012 .

[8]  Matthew A. Franchek,et al.  Residual generation and statistical pattern recognition for engine misfire diagnostics , 2006 .

[9]  Erik Sundin,et al.  Exploring inter-organizational relationships in automotive component remanufacturing , 2014 .

[10]  Christos Zikopoulos,et al.  Optimal location and value of timely sorting of used items in a remanufacturing supply chain with multiple collection sites , 2008 .

[11]  Ashkan Moosavian,et al.  Piston scuffing fault and its identification in an IC engine by vibration analysis , 2016 .

[12]  Ahmad Saifizul,et al.  Empirical investigation of acoustic emission signals for valve failure identification by using statistical method , 2014 .

[13]  Nam Wook Cho,et al.  A hierarchical end-of-life decision model for determining the economic levels of remanufacturing and disassembly under environmental regulations , 2010 .

[14]  F. AbRashidM.F.,et al.  SIMULATION STUDY OF A VEHICLE PRODUCTION LINE FOR PRODUCTIVITY IMPROVEMENT , 2015 .

[15]  Hannu T. Toivonen,et al.  Torsional system parameter identification of internal combustion engines under normal operation , 2011 .

[16]  John W. Sutherland,et al.  Sustainability of the automotive recycling infrastructure: review of current research and identification of future challenges , 2008 .

[17]  P. Hosek.  Algorithm for signal drop-out recognition in IC engine valve kinematics signal measured by laser Doppler vibrometer , 2012 .

[18]  Kumaran Kadirgama,et al.  Effect of dissimilar valve lift on a bi-fuel CNG engine operation , 2016 .

[19]  Maurice Kettner,et al.  Spark plug fault recognition based on sensor fusion and classifier combination using Dempster–Shafer evidence theory , 2015 .

[20]  Luis Reis,et al.  On the assessment of fatigue life of marine diesel engine crankshafts , 2015 .

[21]  Jiangwei Chu,et al.  Development pattern and enhancing system of automotive components remanufacturing industry in China , 2011 .

[22]  Emanuele Menegatti,et al.  A thermographic visual inspection system for crack detection in metal parts exploiting a robotic workcell , 2015 .

[23]  Paulina Golinska,et al.  Grey Decision Making as a tool for the classification of the sustainability level of remanufacturing companies , 2015 .

[24]  M. A. Mansor,et al.  KNOWLEDGE MANAGEMENT FOR MAINTENANCE ACTIVITIES IN THE MANUFACTURING SECTOR , 2012 .

[25]  Martin Charter,et al.  Remanufacturing and product design , 2008 .

[26]  Jayantha Ananda Epaarachchi,et al.  An Investigation of Acoustic Emission Signal Attenuation for Monitoring of Progressive Failure in Fiberglass Reinforced Composite Laminates , 2013 .