论文信息 - ULSI-quality gate oxide on thin-film-silicon-on-insulator

ULSI-quality gate oxide on thin-film-silicon-on-insulator

Gate oxide quality for sub-0.5 /spl mu/m applications on Thin-Film-Silicon-On-Insulator (TFSOI) substrates is described. Intrinsic thermal oxide properties such as I-V, Q/sub BD/ and charge trapping rates, as well as device effective mobilities, of TFSOI are comparable to bulk. However, increased surface micro-roughness on SOI materials leads to a higher thermal oxide defect density relative to that of bulk silicon. The use of wafer polish or stacked thermal/LPCVD oxide is found to be effective in achieving bulk-quality oxide defect densities on TFSOI while maintaining intrinsic I-V, Q/sub BD/ and charge trapping properties.<<ETX>>

[1] P. Karulkar. Quality of gate oxides grown on state-of-the-art SIMOX and ZMR SOI substrates , 1993, IEEE Electron Device Letters.

[2] T. Ohmi,et al. Dependence of electron channel mobility on Si-SiO/sub 2/ interface microroughness , 1991, IEEE Electron Device Letters.

[3] M. Manfra,et al. High-power-density GaAs MISFETs with a low-temperature-grown epitaxial layer as the insulator , 1991, IEEE Electron Device Letters.

[4] Masayuki Miyashita,et al. Dependence of Thin Oxide Films Quality on Surface Micro-Roughness , 1991, 1991 Symposium on VLSI Technology.

[5] P.H. Woerlee,et al. A half-micron CMOS technology using ultra-thin silicon on insulator , 1990, International Technical Digest on Electron Devices.

[6] K. Tokunaga,et al. Increased drain saturation current in ultra-thin silicon-on-insulator (SOI) MOS transistors , 1988, IEEE Electron Device Letters.

[7] C. Hu,et al. A high-quality stacked thermal/LPCVD gate oxide technology for ULSI , 1993, IEEE Electron Device Letters.

[8] J. Colinge. Silicon-on-Insulator Technology , 1991 .