The effect of bio-carbon addition on the electrical, mechanical, and thermal properties of polyvinyl alcohol/biochar composites

The composites of polyvinyl alcohol and bio-carbon (i.e. biochar) were prepared by a solution casting method to investigate their electrical conductivity and mechanical and thermal properties. The polyvinyl alcohol/biochar composites filled with 2 wt% and 10 wt% biochar exhibit a similar electrical conductivity to most carbon nanotube and graphene reinforced polyvinyl alcohol composites. Results of mechanical tests indicate that addition of the biochar reduced the tensile strength of the polyvinyl alcohol/biochar composites. However, the tensile modulus and storage modulus above the glass transition temperature were improved through the addition of biochar. The results of thermal gravimetric analysis and differential scanning calorimetry indicated that addition of biochar increased the thermal decomposition temperature of polyvinyl alcohol/biochar composites. These results demonstrate that biochar holds great potential for replacing the carbon nanotubes and graphene as a filler of polymers in electrical applications.

[1]  D. Bhattacharyya,et al.  A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites. , 2015, Waste management.

[2]  Shouxiang Jiang,et al.  The synthesis of graphene nanoribbon and its reinforcing effect on poly (vinyl alcohol) , 2015 .

[3]  A. Abdolmaleki,et al.  l-Phenylalanine amino acid functionalized multi walled carbon nanotube (MWCNT) as a reinforced filler for improving mechanical and morphological properties of poly(vinyl alcohol)/MWCNT composite , 2014 .

[4]  Tapas Kuila,et al.  Enhanced properties of aryl diazonium salt-functionalized graphene/poly(vinyl alcohol) composites , 2014 .

[5]  A. Gafur,et al.  Thermal Properties of Carbon Nanotube (CNT) Reinforced Polyvinyl Alcohol (PVA) Composites , 2013 .

[6]  S. C. Peterson.  Utilization of low-ash biochar to partially replace carbon black in styrene–butadiene rubber composites , 2013 .

[7]  I. Kinloch,et al.  Synthesis and characterisation of silica–carbon nanotube hybrid microparticles and their effect on the electrical properties of poly(vinyl alcohol) composites , 2013 .

[8]  A. S. Ayesh,et al.  Enhanced physical properties of poly(vinyl alcohol)-based single-walled carbon nanotube nanocomposites through ozone treatment of single-walled carbon nanotubes , 2013 .

[9]  Ana M. Benito,et al.  Combination of two dispersants as a valuable strategy to prepare improved poly(vinyl alcohol)/carbon nanotube composites , 2013 .

[10]  G. Ahmetli,et al.  Epoxy composites based on inexpensive char filler obtained from plastic waste and natural resources , 2013 .

[11]  K. Liao,et al.  The effect of the ultrasonication pre-treatment of graphene oxide (GO) on the mechanical properties of GO/polyvinyl alcohol composites , 2013 .

[12]  C. Galiotis,et al.  Polymer–nanotube interaction in MWCNT/poly(vinyl alcohol) composite mats , 2012 .

[13]  Bobing He,et al.  Effect of nano‐silica on the mechanical, thermal, and crystalline properties of poly(vinyl alcohol)/nano‐silica films , 2012 .

[14]  W. Liu,et al.  Poly(vinyl alcohol) reinforced with large-diameter carbon nanotubes via spray winding , 2012 .

[15]  R. Layek,et al.  The physical properties of sulfonated graphene/poly(vinyl alcohol) composites , 2012 .

[16]  Liqun Zhang,et al.  The use of rhodamine B-decorated graphene as a reinforcement in polyvinyl alcohol composites , 2012 .

[17]  S. C. Peterson.  Evaluating corn starch and corn stover biochar as renewable filler in carboxylated styrene–butadiene rubber composites , 2012 .

[18]  Mohammed H Al-Saleh,et al.  Review of the mechanical properties of carbon nanofiber/polymer composites , 2011 .

[19]  Xiaoming Yang,et al.  Layer‐structured poly(vinyl alcohol)/graphene oxide nanocomposites with improved thermal and mechanical properties , 2011 .

[20]  Chen-Chi M. Ma,et al.  Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites , 2011 .

[21]  S. Bose,et al.  Recent advances in graphene based polymer composites , 2010 .

[22]  Guohua Chen,et al.  Electrochemically modified graphite nanosheets and their nanocomposite films with poly(vinyl alcohol) , 2010 .

[23]  Xiaoming Yang,et al.  Synthesis and characterization of layer-aligned poly(vinyl alcohol)/graphene nanocomposites , 2010 .

[24]  D. Tasis,et al.  Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties , 2010 .

[25]  J. Lehmann,et al.  Biochar for Environmental Management: Science and Technology , 2009 .

[26]  J. Jellison,et al.  Significance of the heating rate on the physical properties of carbonized maple wood , 2008 .

[27]  Yi Lin,et al.  Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes , 2004 .

[28]  Steven B. Warner,et al.  Nanocomposites with functionalized carbon nanotubes , 2003 .

[29]  J. Coleman,et al.  Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites , 2002 .