Effect of the turbulence models on Rushton turbine generated flow in a stirred vessel

In this paper, we performed a comparison of four turbulence models using for numerical simulation of the hydrodynamic structure generated by a Rushton turbine in a cylindrical tank. The finite volume method was employed to solve the Navier-Stokes equations governing the transport of momentum. In this study four closure models tested were: k-ɛ standard, k-ɛ RNG, k-ɛ Realizable and RSM (Reynolds Stress Model). MRF (Multi Reference Frame) technique was used with FLUENT software package. The present work aimed to provide improved predictions of turbulent flow in a stirred vessel and in particular to assess the ability to predict the dissipation rate of turbulent kinetic energy (e) that constitutes a most stringent test of prediction capability due to the small scales at which dissipation takes place. The amplitude of local and overall dissipation rate is shown to be strongly dependent on the choice of turbulence model. The numerical predictions were compared with literature results for comparable configurations and with experimental data obtained using Particle Image Velocimetry (PIV). A very good agreement was found with regards to turbulence.

[1]  S L Yeoh,et al.  Numerical Simulation of Turbulent Flow Characteristics in a Stirred Vessel Using the LES and RANS Approaches with the Sliding/Deforming Mesh Methodology , 2004 .

[2]  Piero M. Armenante,et al.  Velocity profiles in a baffled vessel with single or double pitched-blade turbines , 1996 .

[3]  Jos Derksen,et al.  Large eddy simulations on the flow driven by a Rushton turbine , 1999 .

[4]  D. G. Lilley,et al.  LIMITATIONS AND EMPIRICAL EXTENSIONS OF THE k-ε MODEL AS APPLIED TO TURBULENT CONFINED SWIRLING FLOWS , 1984 .

[5]  T. Shih,et al.  A New K-epsilon Eddy Viscosity Model for High Reynolds Number Turbulent Flows: Model Development and Validation , 1994 .

[6]  Jos Derksen,et al.  Large-eddy simulation of single-phase flow dynamics and mixing in an industrial crystallizer , 2007 .

[7]  Matthias Reuss,et al.  A critical assessment on the use of k–ε turbulence models for simulation of the turbulent liquid flow induced by a Rushton-turbine in baffled stirred-tank reactors , 1999 .

[8]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[9]  W. Kelly,et al.  Using CFD to predict the behavior of power law fluids near axial-flow impellers operating in the transitional flow regime , 2003 .

[10]  J. Eggels,et al.  Direct and large-eddy simulation of turbulent fluid flow using the lattice-Boltzmann scheme , 1996 .

[11]  Jos Derksen.  Assessment of Large Eddy Simulations for Agitated Flows , 2001 .

[12]  Elizabeth M. Marshall,et al.  The Use of Large Eddy Simulation to Study Stirred Vessel Hydrodynamics , 2000 .

[13]  S. Orszag,et al.  Renormalization group and local order in strong turbulence , 1987 .

[14]  Jyeshtharaj B. Joshi,et al.  Effect of impeller design on the flow pattern and mixing in stirred tanks , 2006 .

[15]  Zdzisław Jaworski,et al.  Modelling of the Turbulent Wall Jet Generated by a Pitched Blade Turbine Impeller: The Effect of Turbulence Model , 2002 .

[16]  J. Derksena,et al.  Assessment of large eddy and RANS stirred tank simulations by means of LDA , 2004 .

[17]  Alberto Brucato,et al.  Numerical prediction of flow fields in baffled stirred vessels: A comparison of alternative modelling approaches , 1998 .

[18]  J. Aubin,et al.  Modeling turbulent flow in stirred tanks with CFD: the influence of the modeling approach, turbulence model and numerical scheme , 2004 .

[19]  Suzanne M. Kresta,et al.  Low frequency macroinstabilities in a stirred tank: scale-up and prediction based on large eddy simulations , 2003 .

[20]  J. Derksen,et al.  Assessment of large eddy and RANS stirred tank simulations by means of LDA , 2004 .

[21]  B. Launder,et al.  Progress in the development of a Reynolds-stress turbulence closure , 1975, Journal of Fluid Mechanics.

[22]  Alberto Brucato,et al.  Large-eddy simulation of turbulent flow in an unbaffled stirred tank driven by a Rushton turbine , 2005 .

[23]  Jyeshtharaj B. Joshi,et al.  Assessment of standard k–ε, RSM and LES turbulence models in a baffled stirred vessel agitated by various impeller designs , 2008 .

[24]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.