Interfacial microstructure and joining properties of TiAl/Ti3AlC2 diffusion bonded joints using Zr and Ni foils as interlayer

[1]  L. Chai,et al.  Microstructural evolution of cast TiAlNb intermetallics for third generation gas turbine components , 2013 .

[2]  L. Hultman,et al.  Cold-spray deposition of Ti2AlC coatings , 2013 .

[3]  L. X. Zhang,et al.  Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2–Ni–B brazing powder , 2013 .

[4]  Yudong Huang,et al.  Effects of alloying elements in GH99 superalloy on microstructure evolution of reactive brazing TiAl/GH99 joints , 2013 .

[5]  M. Bache,et al.  High temperature creep behaviour in the γ titanium aluminide Ti–45Al–2Mn–2Nb , 2013 .

[6]  S. Chatterjee,et al.  Diffusion Bonding of 17-4 Precipitation Hardening Stainless Steel to Ti Alloy With and Without Ni Alloy Interlayer: Interface Microstructure and Mechanical Properties , 2013, Metallurgical and Materials Transactions A.

[7]  D. Jia,et al.  Diffusion bonding of ZrB2–SiC/Nb with in situ synthesized TiB whiskers array , 2012 .

[8]  U. E. Klotz,et al.  Diffusion bonding of gamma-TiAl using modified Ti/Al nanolayers , 2012 .

[9]  Xiaoguo Song,et al.  Brazing high Nb containing TiAl alloy using TiNi–Nb eutectic braze alloy , 2012 .

[10]  Xiaoguo Song,et al.  Characterization of Al/Ni multilayers and their application in diffusion bonding of TiAl to TiC cermet , 2012 .

[11]  Aijun Li,et al.  Joining of Ti 3 SiC 2 by Magnetron Sputtering a Layer of Cu or Zr Followed by Heat Treating at Relatively Low Temperatures , 2011 .

[12]  Manuel F. Vieira,et al.  Diffusion bonding of TiAl using reactive Ni/Al nanolayers and Ti and Ni foils , 2011 .

[13]  Michel W. Barsoum,et al.  Elastic and Mechanical Properties of the MAX Phases , 2011 .

[14]  Xiaoguo Song,et al.  Effect of Si3N4-particles addition in Ag–Cu–Ti filler alloy on Si3N4/TiAl brazed joint , 2011 .

[15]  Zhengming Sun,et al.  Progress in research and development on MAX phases: a family of layered ternary compounds , 2011 .

[16]  Ulf Jansson,et al.  The Mn+1AXn phases: Materials science and thin-film processing , 2010 .

[17]  Yanchun Zhou,et al.  Direct diffusion bonding of Ti3SiC2 and Ti3AlC2 , 2009 .

[18]  Zheng-Wang Li,et al.  Microstructure and fracture properties of reaction-assisted diffusion bonding of TiAl intermetallic with Al/Ni multilayer foils , 2008 .

[19]  Zhengming Sun,et al.  Low temperature synthesis of single-phase Ti3AlC2 through reactive sintering Ti/Al/C powders , 2008 .

[20]  Yong Du,et al.  On the constitution of the ternary system Al–Ni–Ti , 2007 .

[21]  Zhengming Sun,et al.  Rapid synthesis of single-phase Ti3AlC2 through pulse discharge sintering a TiH2/Al/TiC powder mixture , 2007 .

[22]  Yanchun Zhou,et al.  Microstructure and mechanical strength of transient liquid phase bonded Ti3SiC2 joints using Al interlayer , 2007 .

[23]  Alain Lasalmonie,et al.  Intermetallics: Why is it so difficult to introduce them in gas turbine engines? , 2006 .

[24]  Xiong Yin,et al.  Microstructure and mechanical strength of diffusion-bonded Ti3SiC2/Ni joints , 2006 .

[25]  Wenchen Xu,et al.  Mechanical property of induction brazing TiAl-based intermetallics to steel 35CrMo using AgCuTi filler metal , 2006 .

[26]  Jinbang Wang,et al.  Microstructural characterization of layered ternary Ti2AlC , 2006 .

[27]  M. Barsoum,et al.  Synthesis and Characterization of Ti3AlC2 , 2004 .

[28]  E. Gutmanas,et al.  Pressure‐Assisted Combustion Synthesis of Dense Layered Ti3AlC2 and its Mechanical Properties , 2004 .

[29]  C. Chen,et al.  Superplastic diffusion bonding of γ-TiAl-based alloy , 2004 .

[30]  M. Bacos,et al.  Brazed joints in γ TiAl sheet: microstructure and properties , 2004 .

[31]  Jiaoqun Zhu,et al.  Synthesis of single-phase polycrystalline Ti3SiC2 and Ti3AlC2 by hot pressing with the assistance of metallic Al or Si , 2004 .

[32]  J. Ferreira,et al.  Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system , 2003 .

[33]  Edward A. Loria,et al.  Quo vadis gamma titanium aluminide , 2001 .

[34]  Q. Xia,et al.  Shear deformation of a TiAl alloy during cyclic heat treatment , 2000 .

[35]  Helmut Clemens,et al.  Processing and applications of intermetallic γ-TiAl-based alloys , 2000 .

[36]  A. Katsman,et al.  Nickel–aluminide coating of TiAl by a two-stage process , 2000 .

[37]  H. Inui,et al.  High-temperature structural intermetallics , 2000 .

[38]  Pierre Villars,et al.  Handbook of Ternary Alloy Phase Diagrams , 1995 .

[39]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .