A multi-axis MEMS force-torque sensor for measuring the load on a microrobot actuated by magnetic fields

This paper presents the design of a multi-axis micro force-torque sensor. The sensor is able to measure forces along two axes and a torque perpendicular to these forces. The load is measured by capacitive comb drives which provide a high sensitivity. The microfabrication process, the sensor readout electronics as well as the calibration procedure are presented. The sensor was used to measure the force and torque on a magnetically actuated microrobot. This microrobot is assembled from microfabricated nickel parts for directed drug delivery inside the human body. Precise knowledge load on the microrobot is required for accurate positioning and control of the robot. The three-axis micro sensor is used to simultaneously measure the forces and torques acting on the microrobot in a magnetic field and thus provides valuable data for magnetic control methods of microrobots.

[1]  C. D. Mote,et al.  Development and calibration of a sub-millimeter three-component force sensor , 1997 .

[2]  Peter Vettiger,et al.  Microfabricated ultrasensitive piezoresistive cantilevers for torque magnetometry , 1999 .

[3]  Bradley J. Nelson,et al.  Calibration of multi-axis MEMS force sensors using the shape from motion method , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[4]  Jake J. Abbott,et al.  Measuring the Magnetic and Hydrodynamic Properties of Assembled-MEMS Microrobots , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[5]  C. D. Mote,et al.  Development and calibration of a submillimeter three-component force sensor , 1997, Experimental Mechanics.

[6]  D. P. Potasek,et al.  Characterizing fruit fly flight behavior using a microforce sensor with a new comb-drive configuration , 2005, Journal of Microelectromechanical Systems.

[7]  Bradley J. Nelson,et al.  A bulk microfabricated multi-axis capacitive cellular force sensor using transverse comb drives , 2002 .

[8]  B. Nelson,et al.  Monolithically Fabricated Microgripper With Integrated Force Sensor for Manipulating Microobjects and Biological Cells Aligned in an Ultrasonic Field , 2007, Journal of Microelectromechanical Systems.

[9]  S. Bütefisch,et al.  Micromechanical three-axial tactile force sensor for micromaterial characterisation , 2001 .

[10]  Bradley J. Nelson,et al.  Modeling and Control of Untethered Biomicrorobots in a Fluidic Environment Using Electromagnetic Fields , 2006, Int. J. Robotics Res..