Optimal Sizing of Energy Storage for Regenerative Braking in Electric Railway Systems

The problem of optimally sizing hybrid energy storage systems (HESS) installed in electric railway systems, considering the effect of regenerative braking is studied in this paper. HESSs combine traditional batteries and newly developed ultracapacitors, taking advantage of the high energy capacity of batteries and of the flexibility and ability to capture high power density of ultracapacitors. A novel mixed integer linear programming formulation that includes the counting of battery cycles is presented. Some particularities of battery operation are included in the model, like the dependence of its performance on the number of cycles and the depth of discharge (DOD). Results are reported first for a illustrative case study, allowing us to perform sensitivity studies for several parameters; results are also reported and for a larger case, closely resembling the problem faced by railway energy systems planners and operators.

[1]  A. Emadi,et al.  A New Battery/UltraCapacitor Hybrid Energy Storage System for Electric, Hybrid, and Plug-In Hybrid Electric Vehicles , 2012, IEEE Transactions on Power Electronics.

[2]  H. M. Lee A study on energy saving by application of energy storage device , 2012, 2012 12th International Conference on Control, Automation and Systems.

[3]  Jianwei Li,et al.  A new parameter estimation algorithm for an electrical analogue battery model , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[4]  D. Iannuzzi,et al.  A sample application of supercapacitor storage systems for suburban transit , 2010, Electrical Systems for Aircraft, Railway and Ship Propulsion.

[5]  F. Ciccarelli,et al.  Optimal design of DC electrified railway stationary storage system , 2009, 2009 International Conference on Clean Electrical Power.

[6]  D. Iannuzzi Improvement of the energy recovery of traction electrical drives using supercapacitors , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[7]  H. Biechl,et al.  Ultracapacitor assisted regenerative braking in metropolitan railway systems , 2012, 2012 IEEE Colombian Intelligent Transportation Systems Symposium (CITSS).

[8]  M C Falvo,et al.  Energy saving in metro-transit systems: Impact of braking energy management , 2010, SPEEDAM 2010.

[9]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[10]  Ghias Farivar,et al.  Optimal stationary super-capacitor energy storage system in a metro line , 2011, 2011 2nd International Conference on Electric Power and Energy Conversion Systems (EPECS).

[11]  Syed M. Peeran,et al.  Train Voltage Analysis for AC Railroad Electrification , 1984, IEEE Transactions on Industry Applications.

[12]  R Barrero,et al.  Stationary or onboard energy storage systems for energy consumption reduction in a metro network , 2010 .

[13]  N A Chaturvedi,et al.  Modeling, estimation, and control challenges for lithium-ion batteries , 2010, Proceedings of the 2010 American Control Conference.

[14]  J. Van Mierlo,et al.  Improving energy efficiency in public transport: Stationary supercapacitor based Energy Storage Systems for a metro network , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[15]  Paul Denholm,et al.  A Dynamic Programming Approach to Estimate the Capacity Value of Energy Storage , 2014, IEEE Transactions on Power Systems.

[16]  James S. Wallace,et al.  Stationary applications of energy storage technologies for transit systems , 2010, 2010 IEEE Electrical Power & Energy Conference.

[17]  Flavio Ciccarelli,et al.  Comparison of energy management control strategy based on wayside ESS for LRV application , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[18]  S. Santoso,et al.  Augmenting Wind Power Penetration and Grid Voltage Stability Limits Using ESS: Application Design, Sizing, and a Case Study , 2012, IEEE Transactions on Power Systems.

[19]  T. Konishi,et al.  Fixed energy storage technology applied for DC electrified railway (traction power substation) , 2012, 2012 Electrical Systems for Aircraft, Railway and Ship Propulsion.

[20]  Marcelo A. Pérez,et al.  Multilevel Converters: An Enabling Technology for High-Power Applications , 2009, Proceedings of the IEEE.

[21]  A. Kuperman,et al.  Design of a Semiactive Battery-Ultracapacitor Hybrid Energy Source , 2013, IEEE Transactions on Power Electronics.