The effects of kraft lignin additives on wood fuel pellet quality, energy use and shelf life

Abstract In 2011, the total consumption of pellets in Sweden amounted to 1.9 million tons, which represents an energy value of 9 TWh. The pellets are used in large-scale as well as in small-scale applications, and increased demands on pellet quality are likely to force pellet producers to improve on the pellet properties. One way of increasing pellet quality is by using additives. The purpose of this article, therefore, is to examine kraft lignin as an additive. Pellets were produced in a small industrial pellet press located at Karlstad University, Karlstad, Sweden, and 1–4% of kraft lignin was added to the pellets. The results indicate that the addition of an increased amount of kraft lignin to the pellets increases their mechanical durability and their lengths. The results also indicate that dry kraft lignin yields pellets with higher durability as compared to wet kraft lignin. The energy demand was unaffected by the increased use of kraft lignin. The general results presented in this paper are useful for producers of lignin, pellet producers and end-users of pellets, who are interested in developing their products and/or improving the production processes.

[1]  Mehrdad Arshadi,et al.  EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM SOFTWOOD PELLETS DURING STORAGE , 2005 .

[2]  Magnus Ståhl,et al.  Swedish perspective on wood fuel pellets for household heating: A modified standard for pellets could reduce end-user problems , 2009 .

[3]  D. Goring,et al.  Thermal softening of lignin, hemicellulose and cellulose , 1963 .

[4]  O. Fasina.  Physical properties of peanut hull pellets. , 2008, Bioresource technology.

[5]  Magnus Ståhl,et al.  Validation of a Mathematical Model by Studying the Effects of Recirculation of Drying Gases , 2008 .

[6]  Roger Renström,et al.  Energy Efficient Wood Fuel Drying , 2004 .

[7]  Ingwald Obernberger,et al.  Wood pellet production costs under Austrian and in comparison to Swedish framework conditions , 2004 .

[8]  D. Gardner,et al.  Enhancing the Fuel Value of Wood Pellets with the Addition of Lignin , 2010 .

[9]  Jonas Berghel.  Improved Fluidized Bed Drying Technology for Wood Fuels , 2004 .

[10]  D. Bergström,et al.  Effects of Extractives on the Physical Characteristics of Scots Pine Sawdust Fuel Pellets , 2010 .

[11]  P. Lehtikangas.  Quality properties of pelletised sawdust, logging residues and bark , 2001 .

[12]  Per Blomqvist,et al.  Self-heating in storages of wood pellets , 2008 .

[13]  K. Granström,et al.  Effects on Pellet Properties and Energy Use When Starch Is Added in the Wood-Fuel Pelletizing Process , 2012 .

[14]  J. Berghel,et al.  Energy Efficient Pilot-Scale Production of Wood Fuel Pellets made from a Raw Material Mix Including Sawdust and Rapeseed Cake , 2011 .

[15]  Christoffer Boman,et al.  Residential combustion performance of pelletized hydrolysis residue from lignocellulosic ethanol production , 2006 .

[16]  Marcus Öhman,et al.  Effect of raw material composition in woody biomass pellets on combustion characteristics. , 2007 .

[17]  Roger Renström.  The potential of improvements in the energy systems of sawmills when coupled dryers are used for drying of wood fuels and wood products , 2006 .

[18]  E. Back.  The Bonding Mechanism in Hardboard Manufacture Review Report , 2009 .

[19]  Johan E. Hustad,et al.  Toward an understanding of controlling parameters in softwood and hardwood pellets production , 2006 .

[20]  Jonas Berghel,et al.  The Effect of Using a Heating Tube in an Existing Spouted Bed Superheated Steam Dryer , 2011 .

[21]  M. Sjöström,et al.  Effects of raw material moisture content, densification pressure and temperature on some properties of Norway spruce pellets , 2005 .