Using engine exhaust gas as energy source for an absorption refrigeration system

This work presents an experimental study of an ammonia-water absorption refrigeration system using the exhaust of an internal combustion engine as energy source. The exhaust gas energy availability and the impact of the absorption refrigeration system on engine performance, exhaust emissions, and power economy are evaluated. A production automotive engine was tested in a bench test dynamometer, with the absorption refrigeration system adapted to the exhaust pipe. The engine was tested for 25%, 50%, 75% and wide-open throttle valve. The refrigerator reached a steady state temperature between 4 and 13 °C about 3 h after system start up, depending on engine throttle valve opening. The calculated exhaust gas energy availability suggests the cooling capacity can be highly improved for a dedicated system. Exhaust hydrocarbon emissions were higher when the refrigeration system was installed in the engine exhaust, but carbon monoxide emissions were reduced, while carbon dioxide concentration remained practically unaltered.

[1]  Horacio Perez-Blanco.  Conceptual design of a high-efficiency absorption cooling cycle , 1993 .

[2]  José Ricardo Sodré,et al.  An Improved Model for Spark Ignition Engine Exhaust Hydrocarbons , 1997 .

[3]  T.M.S. Callander,et al.  Experimental investigation of a vapor absorption refrigeration system , 2004 .

[4]  I. Horuz.  A comparison between ammonia-water and water-lithium bromide solutions in vapor absorption refrigeration systems , 1998 .

[5]  J. Y. Wu,et al.  Theoretical research of a silica gel–water adsorption chiller in a micro combined cooling, heating and power (CCHP) system , 2009 .

[6]  Ruzhu Wang,et al.  Locomotive driver cabin adsorption air-conditioner , 2003 .

[7]  Yang Zhao,et al.  Optimization study of combined refrigeration cycles driven by an engine , 2003 .

[8]  Chin Wu,et al.  Maximum obtainable specific power of high-temperature waste heat engines , 1995 .

[9]  Reinhard Radermacher,et al.  Performance assessment of multistage absorption cycles , 1996 .

[10]  F. Meunier,et al.  Adsorptive cooling: a clean technology , 2001 .

[11]  Kim Choon Ng,et al.  Thermodynamic modeling of an ammonia-water absorption chiller , 2002 .

[12]  D. Westphalen,et al.  Absorption refrigeration system for mobile applications utilizing exhaust gases , 1997 .

[13]  Ruzhu Wang,et al.  Development of an experimental prototype of an integrated thermal management controller for internal-combustion-engine-based cogeneration systems , 2007 .

[14]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[15]  Ruzhu Wang,et al.  Energy and exergy analyses on a novel hybrid solar heating, cooling and power generation system for remote areas , 2009 .

[16]  Ke Yang,et al.  Development of a metal hydride refrigeration system as an exhaust gas-driven automobile air conditioner , 2007 .

[17]  Saffa Riffat,et al.  Combined cooling and heating using a gas engine in a supermarket , 2001 .

[18]  Andrea Gasparella,et al.  Ammonia-water absorption machines for refrigeration: theoretical and real performances , 1996 .

[19]  S. Chungpaibulpatana,et al.  A review of absorption refrigeration technologies , 2001 .

[20]  Xiaoqiang Zhai,et al.  Design and performance of a solar-powered air-conditioning system in a green building , 2008 .