Time synchronization over heterogeneous network for smart grid application: Design and characterization of a real case

Distributed monitoring and control systems are mandatory for the efficient management of the distribution grid, due to the growing presence of renewable energy sources. Time synchronization among devices deployed in distribution grid plays a key role, since a common time reference is essential to correlate power quality and high sampling frequency measure, and generally coordinate any distributed actions. The design and the deployment of a time synchronization system over an existing heterogeneous network is investigated in the paper. The Network Time Protocol (NTP) has been chosen due to its backward compatibility, the good security level, and the intrinsically robust hierarchy. Several NTP synchronization architectures have been proposed and then applied to a real (operating) distribution grid, both at Medium Voltage (MV) and Low Voltage (LV). The experimental validation was carried out during several weeks on the live system. The results in the MV grid highlight the trade-off existing between synchronization accuracy and availability: the synchronization accuracy over MV Broadband Power Line (BPL) links decreases from 20ms to 50ms when a more reliable architecture, from the point of view of time synchronization, is used. On the other hand, experimental results show as end-nodes connected on LV grid by means of BPL have a mean offset typically below 50ms, and a synchronization accuracy on the order of 150ms. These results are due to the limitation of the synchronization protocol deployed in the LV end-nodes and to scalability issues of power line communication networks when the number of nodes increases.

[1]  Steven M. Corns,et al.  Timekeeping Issues in Ultra-Quality Metering Systems , 2014, IEEE Transactions on Smart Grid.

[2]  Alessandra Flammini,et al.  A New IED With PMU Functionalities for Electrical Substations , 2013, IEEE Transactions on Instrumentation and Measurement.

[3]  Davide Della Giustina,et al.  SmartDomoGrid: Reference architecture and use case analyses for a grid-customer interaction , 2013, IEEE PES ISGT Europe 2013.

[4]  Davide Della Giustina,et al.  Automation of Distribution Grids With IEC 61850: A First Approach Using Broadband Power Line Communication , 2013, IEEE Transactions on Instrumentation and Measurement.

[5]  A. Cataliotti,et al.  Power-Line Communication in Medium-Voltage System: Simulation Model and Onfield Experimental Tests , 2012, IEEE Transactions on Power Delivery.

[6]  M. Javadi,et al.  Renewable energy resources short-term scheduling and dynamic network reconfiguration for sustainable energy consumption , 2015 .

[7]  Felipe Alvarez-Cuevas Figuerola,et al.  Type An IP based, highly reliable telecommunications framework for advanced smart grid applications , 2012 .

[8]  Tal Mizrahi,et al.  Security Requirements of Time Protocols in Packet Switched Networks , 2014, RFC.

[9]  Lucia Lo Bello,et al.  L-PTP: A novel clock synchronization protocol for Powerline networks , 2012, Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).

[10]  Thilo Sauter,et al.  End-to-End Communication Architecture for Smart Grids , 2011, IEEE Transactions on Industrial Electronics.

[11]  Yasin Kabalci,et al.  A survey on smart metering and smart grid communication , 2016 .

[12]  Daniele Fontanelli,et al.  A clock state estimator for PTP time synchronization in harsh environmental conditions , 2011, 2011 IEEE International Symposium on Precision Clock Synchronization for Measurement, Control and Communication.

[13]  Davide Della Giustina,et al.  Hybrid Communication Network for the Smart Grid: Validation of a Field Test Experience , 2015, IEEE Transactions on Power Delivery.

[14]  Davide Della Giustina,et al.  Smart meters as part of a sensor network for monitoring the low voltage grid , 2015, 2015 IEEE Sensors Applications Symposium (SAS).

[15]  Armando Astarloa,et al.  On the Utilization of System-on-Chip Platforms to Achieve Nanosecond Synchronization Accuracies in Substation Automation Systems , 2017, IEEE Transactions on Smart Grid.

[16]  N. Kamaraj,et al.  Hybrid Neuro Fuzzy approach for automatic generation control in restructured power system , 2016 .

[17]  Alessandra Flammini,et al.  Evaluation of Time Gateways for Synchronization of Substation Automation Systems , 2012, IEEE Transactions on Instrumentation and Measurement.

[18]  Dong Wei,et al.  Protecting Smart Grid Automation Systems Against Cyberattacks , 2011, IEEE Transactions on Smart Grid.

[19]  David L. Mills.  Improved algorithms for synchronizing computer network clocks , 1995, IEEE/ACM Trans. Netw..

[20]  Davide Della Giustina,et al.  Real-Time Low Voltage Network Monitoring—ICT Architecture and Field Test Experience , 2015, IEEE Transactions on Smart Grid.

[21]  Marthe Kassouf,et al.  Performance of the Precision Time Protocol for clock synchronisation in smart grid applications , 2013, Trans. Emerg. Telecommun. Technol..

[22]  Davide Della Giustina,et al.  Experimental characterization of time synchronization over a heterogeneous network for Smart Grids , 2013, 2013 IEEE International Workshop on Applied Measurements for Power Systems (AMPS).

[23]  Murat Yuksel,et al.  A blind processing framework to facilitate openness in smart grid communications , 2015, Comput. Networks.

[24]  Andrea Bondavalli,et al.  Experimental Characterization of Uncertainty Sources in a Software-Only Synchronization System , 2012, IEEE Transactions on Instrumentation and Measurement.

[25]  Katarzyna Kosek-Szott,et al.  A comprehensive analysis of IEEE 802.11 DCF heterogeneous traffic sources , 2014, Ad Hoc Networks.

[26]  Kwang-Cheng Chen,et al.  Machine-to-machine communications: Technologies and challenges , 2014, Ad Hoc Networks.

[27]  Elisa Bertino,et al.  Scalable end-to-end security for advanced metering infrastructures , 2015, Inf. Syst..

[28]  Zhang Jun.  Technical Analysis of IEC 61850 Ed 2.0 , 2013 .

[29]  Paolo Attilio Pegoraro,et al.  A Distributed PMU for Electrical Substations With Wireless Redundant Process Bus , 2015, IEEE Transactions on Instrumentation and Measurement.

[30]  Duncan A. Campbell,et al.  Use of Precision Time Protocol to Synchronize Sampled-Value Process Buses , 2012, IEEE Transactions on Instrumentation and Measurement.

[31]  Kang Lee,et al.  IEEE 1588 standard for a precision clock synchronization protocol for networked measurement and control systems , 2002, 2nd ISA/IEEE Sensors for Industry Conference,.

[32]  Xiaohui Shen,et al.  Precision time synchronization control method for smart grid based on wolf colony algorithm , 2016 .

[33]  Saifur Rahman,et al.  Communication network requirements for major smart grid applications in HAN, NAN and WAN , 2014, Comput. Networks.

[34]  Hwangnam Kim,et al.  AFAR: A robust and delay-constrained communication framework for smart grid applications , 2015, Comput. Networks.

[35]  Gurkan Tuna,et al.  Power line communication technologies for smart grid applications: A review of advances and challenges , 2014, Comput. Networks.

[36]  Zdenek Bradac,et al.  Time Synchronization in Power-line Communication , 2015 .

[37]  Alessandra Flammini,et al.  On the Use of IEEE 1588 in Existing IEC 61850-Based SASs: Current Behavior and Future Challenges , 2011, IEEE Transactions on Instrumentation and Measurement.

[38]  S. Tomasin,et al.  Microgrid control via powerline communications: Network synchronization field tests with prime modules , 2012, 2012 IEEE International Energy Conference and Exhibition (ENERGYCON).