Large-Aperture kHz Operating Frequency Ti-alloy Based Optical Micro Scanning Mirror for LiDAR Application

A micro scanning mirror is an optical device used to scan laser beams which can be used for Light Detection and Ranging (LiDAR) in applications like unmanned driving or Unmanned Aerial Vehicle (UAV). The MEMS scanning mirror’s light-weight and low-power make it a useful device in LiDAR applications. However, the MEMS scanning mirror’s small aperture limits its application because it is too small to deflect faint receiving light. In this paper, we present a Ti-alloy-based electromagnetic micro scanning mirror with very large-aperture (12 mm) and rapid scanning frequency (1.24 kHz). The size of micro-scanner’s mirror plate reached 12 mm, which is much larger than familiar MEMS scanning mirror. The scanner is designed using MEMS design method and fabricated by electro-sparking manufacture method. As the experimental results show, the resonant frequency of the micro scanning mirror is 1240 Hz and the optical scanning angle can reach 26 degrees at resonance frequency when the actuation current is 250 mApp.

[1]  P. Sharma.  Mechanics of materials. , 2010, Technology and health care : official journal of the European Society for Engineering and Medicine.

[2]  Xiaoyang Zhang,et al.  Wide-angle structured light with a scanning MEMS mirror in liquid. , 2016, Optics express.

[3]  Hakan Urey,et al.  Vibration mode frequency formulae for micromechanical scanners , 2005 .

[4]  Zheng You,et al.  A Two-Dimensional Micro Scanner Integrated with a Piezoelectric Actuator and Piezoresistors , 2009, Sensors.

[5]  Thilo Sandner,et al.  Large aperture MEMS scanner module for 3D distance measurement , 2010, MOEMS-MEMS.

[6]  Harumichi Sato,et al.  High-speed metal-based optical microscanners using stainless-steel substrate and piezoelectric thick films prepared by aerosol deposition method , 2007 .

[7]  James Yang,et al.  UAV-borne lidar with MEMS mirror-based scanning capability , 2016, Defense + Security.

[8]  Harald Schenk,et al.  Applications and requirements for MEMS scanner mirrors , 2005, SPIE MOEMS-MEMS.

[9]  Xiaojing J Zhang,et al.  Magnetic-Actuated Stainless Steel Scanner for Two-Photon Hyperspectral Fluorescence Microscope , 2014, Journal of Microelectromechanical Systems.

[10]  Wyatt O. Davis.  Empirical analysis of form drag damping for scanning micromirrors , 2009, MOEMS-MEMS.

[11]  Caglar Ataman,et al.  A dual-axis pointing mirror with moving-magnet actuation , 2013 .

[12]  Huikai Xie,et al.  Large-aperture, rapid scanning MEMS micromirrors for free-space optical communications , 2009, 2009 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics.

[13]  Y. Isono,et al.  Fatigue Life Prediction Criterion for Micro–Nanoscale Single-Crystal Silicon Structures , 2009, Journal of Microelectromechanical Systems.

[14]  D. McCormick,et al.  Gimbal-less monolithic silicon actuators for tip-tilt-piston micromirror applications , 2004, IEEE Journal of Selected Topics in Quantum Electronics.

[15]  U. Hofmann,et al.  Biaxial resonant 7mm-MEMS mirror for automotive LIDAR application , 2012, 2012 International Conference on Optical MEMS and Nanophotonics.

[16]  Harald Schenk,et al.  Torsional stress, fatigue and fracture strength in silicon hinges of a micro scanning mirror , 2004, SPIE MOEMS-MEMS.

[17]  P. Rodrigo,et al.  Eye-safe diode laser Doppler lidar with a MEMS beam-scanner. , 2016, Optics express.

[18]  H. Urey,et al.  MEMS Laser Scanners: A Review , 2014, Journal of Microelectromechanical Systems.

[19]  Xiaobao Lee,et al.  Optical design for uniform scanning in MEMS-based 3D imaging lidar. , 2015, Applied optics.