140-220-GHz Distributed Antenna and Amplifier Co-Integrated in SiGe BiCMOS Process for UWB Receivers

This paper presents the design and characterization of the first stage of a sub-THz receiver consisting of an on-chip stacked Vivaldi antenna integrated with a Cascaded Single-Stage Distributed Amplifier. The employed fabrication process is a 130 nm SiGe BiCMOS technology featuring HBTs with fmax of 450 GHz. A novel design procedure based on the co-design of antenna and amplifier predicted variations of the receiver gain within 4 dB in the frequency range from 140 GHz to 220 GHz, which an innovative measurement technique allowed to validate experimentally. 14 dB of maximum gain have been demonstrated, with variation below 6 dB in the frequency range from 140 GHz to 220 GHz. Compared against the state of art the presented design demonstrates the largest reported absolute and relative frequency band of operation, with an improvement of a factor 2 and 3 against previous art, respectively.

[1]  Thomas de Quincey [C] , 2000, The Works of Thomas De Quincey, Vol. 1: Writings, 1799–1820.

[2]  H Zirath,et al.  Single-Chip 220-GHz Active Heterodyne Receiver and Transmitter MMICs With On-Chip Integrated Antenna , 2011, IEEE Transactions on Microwave Theory and Techniques.

[3]  Wei Meng Lim,et al.  A 239–281 GHz CMOS Receiver With On-Chip Circular-Polarized Substrate Integrated Waveguide Antenna for Sub-Terahertz Imaging , 2014, IEEE Transactions on Terahertz Science and Technology.

[4]  Michael Jenning,et al.  On-Chip Integrated Antennas for 200 GHz Applications , 2015, 2015 IEEE International Conference on Ubiquitous Wireless Broadband (ICUWB).

[5]  Chun-Hsing Li,et al.  A 340-GHz Heterodyne Receiver Front End in 40-nm CMOS for THz Biomedical Imaging Applications , 2016, IEEE Transactions on Terahertz Science and Technology.

[6]  F. Ellinger,et al.  Distributed on-chip antennas to increase system bandwidth at 180 GHz , 2016, 2016 German Microwave Conference (GeMiC).

[7]  Tsuyoshi Murata,et al.  {m , 1934, ACML.