A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations

[1]  R. Reitz,et al.  Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions , 1994 .

[2]  Rolf D. Reitz,et al.  The Influence of Boost Pressure on Emissions and Fuel Consumption of a Heavy-Duty Single-Cylinder D.I. Diesel Engine , 1999 .

[3]  P. Senecal,et al.  Multi-Dimensional Modeling of Direct-Injection Diesel Spray Liquid Length and Flame Lift-off Length using CFD and Parallel Detailed Chemistry , 2003 .

[4]  Christopher J. Rutland,et al.  Intake Flow Effects on Combustion and Emissions in a Diesel Engine , 1998 .

[5]  Song-Charng Kong,et al.  The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation , 1995 .

[6]  P. Senecal,et al.  Simultaneous reduction of engine emissions and fuel consumption using genetic algorithms and multi-dimensional spray and combustion modeling , 2000 .

[7]  C. Rhie,et al.  Numerical Study of the Turbulent Flow Past an Airfoil with Trailing Edge Separation , 1983 .

[8]  Rolf D. Reitz,et al.  Diesel Engine Combustion Chamber Geometry Optimization Using Genetic Algorithms and Multi-Dimensional Spray and Combustion Modeling , 2001 .

[9]  Christopher J. Rutland,et al.  A new droplet collision algorithm , 2000 .

[10]  J. Nagle,et al.  OXIDATION OF CARBON BETWEEN 1000–2000°C , 1962 .

[11]  R. Reitz.  Modeling atomization processes in high-pressure vaporizing sprays , 1987 .

[12]  P. K. Senecal,et al.  Multi-Mode Genetic Algorithm Optimization of Combustion Chamber Geometry for Low Emissions , 2002 .

[13]  A. Leonard.  Energy Cascade in Large-Eddy Simulations of Turbulent Fluid Flows , 1975 .

[14]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .

[15]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[16]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[17]  S. Orszag,et al.  Renormalization group analysis of turbulence. I. Basic theory , 1986 .

[18]  Rolf D. Reitz,et al.  Six-Mode Cycle Evaluation of the Effect of EGR and Multiple Injections on Particulate and NOx Emissions from a D.I. Diesel Engine , 1996 .

[19]  Rolf D. Reitz,et al.  Multidimensional modeling of combustion for a six-mode emissions test cycle on a DI diesel engine , 1997 .

[20]  R. Reitz,et al.  Modeling and Experiments of HCCI Engine Combustion Using Detailed Chemical Kinetics with Multidimensional CFD , 2001 .

[21]  D. Joseph,et al.  Breakup of a liquid drop suddenly exposed to a high-speed airstream , 1999 .

[22]  Rolf D. Reitz,et al.  A methodology for engine design using multi-dimensional modelling and genetic algorithms with validation through experiments , 2000 .

[23]  Dennis L. Siebers,et al.  Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization , 1999 .

[24]  L. Kirsch,et al.  The autoignition of hydrocarbon fuels at high temperatures and pressures—Fitting of a mathematical model , 1977 .

[25]  John Abraham,et al.  Modeling the outcome of drop–drop collisions in Diesel sprays , 2002 .

[26]  H. Hiroyasu,et al.  Models for combustion and formation of nitric oxide and soot in direct injection diesel engines. SAE Paper 760129 , 1976 .

[27]  A. Gosman,et al.  Solution of the implicitly discretised reacting flow equations by operator-splitting , 1986 .

[28]  Rolf D. Reitz,et al.  In-Cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engine , 1997 .

[29]  R. Reitz,et al.  Modeling the effects of drop drag and breakup on fuel sprays. Technical paper , 1993 .

[30]  Dennis L. Siebers,et al.  Liquid-Phase Fuel Penetration in Diesel Sprays , 1998 .

[31]  Christoph Espey,et al.  The effect of TDC temperature and density on the liquid-phase fuel penetration in a D.I. Diesel engine , 1995 .

[32]  Woon Kwang Yeo.  A Generalized High Pass/Low Pass Averaging Procedure for Deriving and Solving Turbulent Flow Equations , 1987 .

[33]  A. A. Amsden,et al.  KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves , 1997 .