High-brightness semiconductor laser sources for materials processing: stacking, beam shaping, and bars

A compact, reliable semiconductor laser source for materials processing, medical, and pumping applications is described. This industrial laser source relies on a combination of technologies that have matured in recent years. In particular, effective means of stacking and imaging monolithic semiconductor laser arrays (a.k.a., bars), together with advances in the design and manufacture of the bars, have enabled the production of robust sources at market-competitive costs. Semiconductor lasers are presently the only lasers known that combine an efficiency of about 50% with compact size and high reliability. Currently the maximum demonstrated output power of a 10-mm-wide semiconductor laser bar exceeds the 260 W level when assembled on an actively cooled heat sink. (The rated power is in the range of 50-100 W). Power levels in the kilowatt range can be reached by stacking such devices. The requirements on the stacking technique and the optic assembly to achieve high brightness are discussed. Optics for beam collimation in fast and slow axis are compared. An example for an optical setup to use in materials processing will be shown. Spot sizes as low as 0.4 mm/spl times/1.2 mm at a numerical aperture of 0.3 and output power of 1 kW are demonstrated. This results in a power density of more than 200 kW/cm/sup 2/. A setup for further increase in brightness by wavelength and polarization coupling will be outlined. For incoherent coupling of multiple beams into a single core optical fiber, a sophisticated beam shaping device is needed to homogenize the beam quality of stacked semiconductor lasers. Applications economics dictate that reliable operation is achievable at numerous wavelengths (both for wavelength-specific applications and for brightness scaling through geometric wavelength multiplexing) and at ever higher per bar power levels. New material systems and epitaxial structures continue to be evaluated in this pursuit. Here we include details of designs and performance for devices operating at 808, 830, and 915 nm. These include characteristics of both single-emitter devices and bars.

[1]  Peter Loosen,et al.  Design and industrial applications of high-power laser diodes , 1997, International Symposium on High Power Laser Systems and Applications.

[2]  Mitsuo Fukuda,et al.  Reliability and degradation of semiconductor lasers and LEDs , 1991 .

[3]  Peter Loosen,et al.  Optimization of microchannel heat sinks for high-power diode lasers in copper technology , 1997, Other Conferences.

[4]  Dan Botez,et al.  High-power InGaAs(P)/InGa(Al)P/GaAs semiconductor diode lasers , 1997, Photonics West.

[5]  T. Graf,et al.  High-power Nd:YLF laser end pumped by a diode-laser bar. , 1993, Optics letters.

[6]  T. A. Grishina,et al.  Study of correlation between optical characteristics and mirror facet temperature of the active region in high-power SCH SQW InGaAs/GaAs and InGaAsP/GaAs laser diodes , 1994, Photonics West - Lasers and Applications in Science and Engineering.

[7]  A. Al-Muhanna,et al.  Short-wavelength (0.7 /spl mu/m, 1999 .

[8]  Peter Loosen,et al.  Optimization of microchannel heatsinks for high-power diode lasers in copper technology , 1998, Photonics West.

[9]  Harvey B. Serreze,et al.  Reliability of GaAs-based semiconductor diode lasers: 0.6-1.1 mu m , 1993 .

[10]  P.S. Zory,et al.  Dark-line-resistant, aluminum-free diode laser at 0.8 mu m , 1992, IEEE Photonics Technology Letters.

[12]  M. Pessa,et al.  GaInAsP gas-source MBE technology , 1995 .

[13]  D. Garbuzov,et al.  High-power 0.8 mu m InGaAsP-GaAs SCH SQW lasers , 1991 .

[14]  Ramon U. Martinelli,et al.  High-power (>10 W) continuous-wave operation from 100-μm-aperture 0.97-μm-emitting Al-free diode lasers , 1998 .

[15]  Peter Loosen,et al.  Fabrication and characterization of high-power diode lasers , 1999, International Symposium on Photonics and Applications.

[16]  Albert Oosenbrug,et al.  Operational stability of 980-nm pump lasers at 200 mW and above , 1997, Photonics West.

[17]  Kai Zhang,et al.  Future directions in 980-nm pump lasers: submarine deployment to low-cost watt-class terrestrial pumps , 1999, Optics East.

[18]  E. Zucker.  High power diode lasers , 1999, 1999 IEEE LEOS Annual Meeting Conference Proceedings. LEOS'99. 12th Annual Meeting. IEEE Lasers and Electro-Optics Society 1999 Annual Meeting (Cat. No.99CH37009).

[19]  Toshiro Hayakawa,et al.  Highly Reliable Operation of High-Power InGaAsP/InGaP/AlGaAs 0.8 µ m Separate Confinement Heterostructure Lasers , 1995 .

[20]  Albert Oosenbrug,et al.  High-brightness broad-area lasers with high reliability for Yb-Er-fiber pumping applications , 1999, Photonics West.

[21]  Toshiro Hayakawa.  High reliability in 0.8-μm high-power InGaAsP/InGaP/AlGaAs laser diodes with a broad waveguide , 1999, Photonics West.

[22]  Stefan Mohrdiek,et al.  Highly efficient 808-nm-range Al-free lasers by gas source MBE , 1997, Photonics West.

[23]  Yong‐Hoon Cho,et al.  Band offset transitivity in AlGaAs/InGaP/InGaAsP heterostructures on a GaAs substrate , 1996 .

[24]  Eckhard Langenbach,et al.  High-power diode laser collimators , 1996, Optical Systems Design.

[25]  T Kobayashi,et al.  Collimation of emissions from a high-power multistripe laser-diode bar with multiprism array coupling and focusing to a small spot. , 1995, Optics letters.

[26]  Peter Loosen,et al.  Fiber-coupling technique for high-power diode laser arrays , 1998, Photonics West.

[27]  Manijeh Razeghi,et al.  Temperature insensitivity of the Al-free InGaAsP lasers for λ =808 and 980 nm , 1997, Photonics West.

[28]  M. Pessa,et al.  Aluminum-free 980-nm GaInAs/GaInAsP/GaInP pump lasers , 1994 .

[29]  Walter Koechner,et al.  Solid-State Laser Engineering , 1976 .

[30]  R. Bringans,et al.  Tensile-strained AlGaAsP and InGaAsP-(AlGa)/sub 0.5/In/sub 0.5/P quantum well laser diodes for TM-mode emission in the wavelength range 650 , 1994, IEEE Photonics Technology Letters.

[31]  H Zbinden,et al.  Q-switched Nd:YLF laser end pumped by a diode-laser bar. , 1990, Optics letters.

[33]  Luke J. Mawst,et al.  m) High-Power InGaAsP-Active Diode Lasers , 1999 .

[34]  M. Sakamoto,et al.  120 W CW output power from monolithic AlGaAs (800 nm) laser diode array mounted on diamond heatsink , 1992 .

[35]  Johann Luft,et al.  Highly reliable 40-W cw InGaAlAs/GaAs 808-nm laser bars , 1999, Photonics West.

[36]  D C Hanna,et al.  Efficient Nd:YAG laser end pumped by a 20-W diode-laser bar. , 1996, Optics letters.

[37]  Peter Loosen.  Advanced concepts of using diode lasers in materials processing , 1997, Other Conferences.

[38]  Peter Loosen,et al.  Packaging and characterization of high-power diode lasers , 2000, Photonics West - Optoelectronic Materials and Devices.

[39]  James R. Leger,et al.  Geometrical transformation of linear diode-laser arrays for longitudinal pumping of solid-state lasers , 1992 .

[40]  P. G. Eliseev,et al.  Optical strength of semiconductor laser materials , 1996 .

[41]  S. Lourdudoss,et al.  Entirely aluminum free 905-nm wavelength buried heterostructure laser by reactive ion etching and semi-insulating GaInP:Fe regrowth , 1997 .